SPECIAL REPAIR TO BUILDING NO P-222 AT 7BRD AND PROVN OF HARD STANDING AND ALLIED WORKS AT 7BRD, AF UNDER GE (AF) TUGHLAKABAD

Amount

Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil as in road side berms complete all as specified and directed by Engr-in-Charge.

M&L for hard core of gauge exceeding 63 mm but not exceeding 100 mm deposited spread and levelled in layer not exceeding 15 cm thick watered and rolled/rammed to true surface of broken stone boulders complete all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick PCC (1:4:8) type B2 using 40 mm graded crshed stone aggregate as in PCC hard standing, complete all as specified and directed.

M&L for sand filling as sub base under interlocking tiles including watering and consolidating complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed by Engr-in-Charge. Note - Compressive strength test certificate required from manufacture.

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate in edges of tiles path complete all as specified and directed by Engr-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required including demolishion of kerb stone complete all specified and directed by Engr-in-charge.

Taking down of cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water and making the surface clean of all old plaster removing etc. complete all as specified and directed by Engr-in-Charge.

M&L for Dubbing out average 10mm thick on irregular face of walls, chajjas, facia etc and mixed with WPC @ 3% wt of cement (when specifically ordered in writing) in CM 1:4 Note:Wpc shall be paid seperately in respective item.

M&L for 10 mm thick rendering readymix plaster of approved make (as per manufaturer's instruction) on interior wall or concrete surfaces finished even and smooth,without extra cement complete all as specified and directed by Enigneer-in-Charge.

M&L for 15 mm thick rendering readymix plaster of approved make (as per manufaturer's instruction) on exterior wall or concrete surfaces finished even and smooth,without extra cement complete all as specified and directed by Enigneer-in-Charge. Note:- Quoted rate shall be deemed to be included for work of any height including scaffolding.

M&L for 5 mm thick rendering readymix plaster of approved make (as per manufaturer's instruction) on ceiling wall/concrete surfaces finished even and smooth,without extra cement complete all as specified and directed by Enigneer-in-Charge.

M&L for two coats of distemper oil emulsion to newly plastered wall surfaces including preparation of surface including 1 mm wall care putty on plaster surface complete all as specified and directed by Engr-in-Charge.

M&L for preparation of walls surfaces and applying a coat of white cement base wall care putty and making surface even and smooth with sand paper and applying one coat of exterior weather proof water base emulsion paint (Apex) in white or tinted complete all as specified & directed. Note:- Quoted rate shall be deemed to be included for work of any height.

M&L for preparation of new plaster surface of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate) as in plinth protection complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4, type B2 using 40 mm graded aggregate as in tank staging laid including finishing the concrete surface even and smooth using extra cement complete all as specified and directed by Engr-in-charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Use and waste form work to landing & chajjas including edges for rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-Charge.

M&L for providing reinforced cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in chajjas and landing complete all as specified and directed by Engr-in-Charge.

S&F MS TMT bar of 10 mm dia and over cut to length bent to shape required including cranking bending etc complete & binding with annealed MS wire not less than 0.9mm dia complete all as specified and directed by Engr-in-Charge.

M&L making good broken egdes of chajjas slabs, facing, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 15 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate with necessary form work/scaffolding, finished the surface even and smooth without using extra cement complete all as specified.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises from Defence land.

M&L machine cut kota stone slab flooring 20-25 mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete.

M&L Screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying floor finishes complete all as specified.

M&L machine cut kota stone slabs as in vertical surfaces such as risers of steps 20-25 mm thick over 10 mm thick cement rendering (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges complete.

M&L for 15 mm thick Screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified.

S&F glazed ceramic joint free edge cut coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm set and jointed in neat cement slurry and pointed in colour cement as in floors, complete all as specified.

S&F glazed ceramic joint free edge cut coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, complete all as specified.

S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm on vertical surfaces such as skirtings including 10 mm thick rendering in CM 1:4 etc complete all as specified.

S&F glazed ceramic coloured tiles 7 to 8 mm thick 450 x 300 mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc including 10 mm thick rendering in CM 1:4 complete all as specified and directed by Engr-in-charge.

M&L in repairs granite work (black slabs) 18 to 20 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified and directed by Engr-in-charge.

Rounding to the edge of stone slabs on edge such as cooking plateform complete all as specified and directed by Engr-in-charge.

S&F in repair PVC (SWR) pipes single socketed150mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-charge.

S&F in repair PVC (SWR) bends 110mm dia any radius complete all as specified and as directed.

Dismantling and breaking up of old cast iron/pvc drain, rain water, waste pipe, vent pipe of any description, jointed with any material complete all as specified.

S&F as in repair 75 mm bore cast iron drain/waste/vent pipes fixed to wall, floor jointed with led joints including dismantling of old cast iron drain, waste and vent pipe of any description, jointed with any material complete all as specified and directed by Engr-in-charge.

S&F as in repair 100 mm bore cast iron drain/waste/vent pipes fixed to walls or floor jointed with led joints including dismantling of old cast iron drain, waste and vent pipe of any description jointed with any material complete all as specified and directed by Engr-in-charge.

M&L as in repair for Cast iron door bends of 75 mm dia including dismantling old fittings complete all as specified and directed by Engr-in-charge.

M&L as in repair for Cast iron door bends of 100 mm dia including dismantling old fittings complete all as specified and directed by Engr-in-charge.

M&L as in repair for 75mm dia of outlet cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 by using 20mm graded aggregate complete all as specified and directed by Engr-in-charge.

S&F in repairs tank of three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I 1000 ltr capacity with epoxy coated aluminium rod & high density plastec ball including disconnecting existing tank and providing all necessary fittings for connecting with pipe line complete all as specified and directed by Engr-in-charge.

S&F in repairs tank of three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I 500 ltr capacity with epoxy coated aluminium rod & high density plastec ball including disconnecting existing tank and providing all necessary fittings for connecting with pipe line complete all as specified and directed by Engr-in-charge.

S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and as directed.

S&F in repairs plastic WC seat cover of any colour for pedestial pan, closed pattern with flat bottom & cover including MS chromium plated, aluminium hinging devices complete all as specified and directed by Engr-in-charge.

S&F Health Faucet with 1.25 mtr long flexible SS tube and hook making connection and making good etc complete all as specified. Make :- Prayag/Jagaur/Volga

S&F in repair PVC low level flushing cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and as directed.

S&F in repair wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed.

S&F in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed.

S&F in repair 15mm bore chromium plated Pillar cock shawan neck type screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified. Make prayag.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified.

S&F in repair 15 mm bore Angle stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified.

S&F in repairs 15 mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed.

S&F in repair 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete all as specified.

S&F soap dish fixed with and including chrominium plated brass screws and wooden/plastic cleats all as specified.

S&F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors including taking down all as specified and directed.

All as per item No 60 above but 15mm bore pipe.

S&F in repair stop valves cast copper alloy type screwed down high pressure with crutch or butterfly handle for 15mm bore complete all as specified.

M&L making good broken egdes of chajjas slabs, facing, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 15 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC 1:2:4 type B-0, with necessary form work/scaffolding, finished the surface even and smooth without using extra cement complete all as specified.

Surface preparation by removal existing roof treatment of tar felt treatment/mud fushka/APP Membrane/PCC/Plaster/ and all foreign material such as grass roots dust etc Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the dust/mud to the places where directed by Engr-in-Charge.

M&L for plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregate as in roof for maint. the uniform slope etc any thickness at any height and in any position all as specified and directed by engr-in-charge at site.

M&L for 10 mm thick screed bed or bedding layer in cement mortar 1:3 set and jointed in neat cement slurry and on brick work or concrete surfaces finished even and smooth without using extra cement using waterproofing compound complete all as specified. Note :-WPC measured and paid separetly

Supply only water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L for the old roof by making the surface clean throughly wire brushed washed, dried up and cleaned of all foreign matter and dust and applying water based UV Resistant elastomeric PU liquid membrane solution minimum two coats over primere coat, as required on ground on area of old broken App membrane/ plastered surfaces using roller as per the manufactures instructions complete all as specified and directed. Make : Shali urethane BTD of STP or equivalent. Note:- Work to be Carried out by authorised applicator as per manufacturer’s instructions.

M&L for providing cement concrete (1:2:4) Type B1 using 20 mm graded stone aggregate in roof or mud stops rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.

M&L for MS rolled section, MS Pipe, MS Square/circular tube, framed work as in balcony railing doors, railing,chajja,gates or other section fixed with fastener complete all as specified and directed. Work to be carried out upto 12 Mtr height. The rates included dismantling of existing RCC balcony wall, including cutting down existing reinforcement and making good as directed.

S&F Welded steel wire fabric exc 4 Kg/ Sqm welded to steel section at any position complete.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint (for steel surfaces) complete all as specified.

Demolition of brick work build in cement mortar complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks, straight of curved on plan exceeding 6M mean radius built in cement mortar 1:6 complete including demolition of brick work built in cement mortar complete all as specified and directed by Engr-in-Charge.

S&F in repairs 6mm thick multi wall clear/bronze/green/ blue polycarbonate sheet with EPDM rubber gasket, silicon sealants, cold forged fasteners etc on steel structure complete all as specified & directed.

M&L for anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified & directed by Engr-in-charge.

S&F aluminium powder coated of any colour (thickness or powder coating not less than 50micron) doors shutters aluminium saction weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles two nos in each door, hinges, anodised aluminium snap beading, screws complete all as specified.

S&F 12mm thick Prelaminatd particle board, interior grade, prelaminatedboth side with decorative choice lamination fixed with screws to timber frame work complete all as specified.

M&L frosted sheet glass ordinary quality 3.00 mm thick and glazing with rubber beading in square n exc 0.50 sqm in each panes fixed to window/ventilator frames complete all as specified.

Anodised aluminium window and ventilator shutters of two track without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays with suitable handle and hinge complete all as specified.

S&F Aluminum Anodized Deko grill MG 104(100mmx105mm) including necessry FUH channel joint cleats screws etc complete all as specified.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-in Charge.

S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete.

S&F Aliminium anodised barrel tower bolts, 150 mm long complete.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames).

S&F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified.

S&F rolled section framed work for door/window chowkhats made out of mild steel angle iron 40mm x 40mm x 6mm including necessay cutting welding etc complete all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed.

S&F 2nd class HW 35mm thick local made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified.

S&F 30 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats etc complete all as specified.

S&F of 19 mm thick medium density flat pressed three layer particle board extension grade quality with 5 mm thick teak wood edging on one side bottom and top and other side 10 mm teak wood edging with rebate suitable for cup board shutters complete all as specified

M&L for preparing wood or wood based new surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F of in repair galvanised mild steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire stapple etc complete all as specified.

S&F of 300 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete.

S&F of 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed.

S&F of 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as 150mm size specified and as directed.

S&F in replacement of 3 compartment in one sinks (three tier) made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm each bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in- charge.

S&F in repair to modern design mirror to bathroom size 120 cm length, 90 cm in width and 8-10mm thickness fix to wall by using ss nuts 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as 150mm size specified and as directed.

S&Fof stainless steel (SS 304) grease trap with perforated basket receptacle containing three compartment system the receptacle is designed to intercept or trap of size 90cmx45cmx45cm complete all as specified and directed by Engr-in-charge.

Taking down carefully aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc. complete all as specified.

Taking down main switches/DB's alongwith existing board incl removing the same from site and making the good to the disturbed surface complete all as specified.

Taking down existing sub main wiring of any type and description including removal of teak wood batten/pipe etc complete all as specified.

M&L in replacement for concealed point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable sheated drawn through and including 20mm dia PVC conduit with all fitting of medium grade ISI marked duly concealed by cutting chases and making good to match with surrounding including necessary periodicals applying one coat of putty and 2 coats of oil bound distember along with PVC insulated FRLS copper conductor cable of size 1.5 Sqmm as earth wire connected to common earth dolly suitable for mounting switch including metal flush boxes complete all as specified and as directed by Engr-in-charge for the following points :- Note:- The work includes cutting of chases and making good disturbed surfaces and quoted rate shall deemed to be included the same item.

One light/fan/fan point controlled by one No piano type switch 5 AMPS single pole one way

One socket point outlet 5/3 pin 5 AMPS controlled by one switch on indipendent board.

One bell/ buzzer point controlled by one switch on indipendent board.

All as per item No 4 above but 2.5 sq mm multistranded, PVC insulated seathed copper conductor cable, and 1.5 sq mm earth continuity conductor in PVC conduit med grade. for 3 pin socket outlet point 15 Amps indipendent,

M&L in replacement ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified.

S&F in replacement switch piano flush type 5 Amps single pole one way complete all as specified. Make-Anchor

S&F in replacement switch socket 5 pin 5 Amps flush type complete all as specified.

S&F in replacement Switch socket combination 3 pin 5A/16 Amp flush type complete all as specified.

M&L in replacement for concealed submain of wiring complete with two run of 4 Sqmm (nominal area) PVC insulated , multi stranded, FRLS copper conductor cable unsheated drawn through and including 20 mm dia PVC conduit with all fitting medium grade ISI marked duly concealed by cutting chases and making good to match with surrounding including necessary periodicals applying one coat of putty and two coat of oil bound distember along with PVC insulated FRLS copper conductor cable of size 4 Sqmm as earth wire connected to common earth dolly complete all as specified and directed by Engr-in-charge. Note:- (i) The work include cutting of chases and making good the disturbed surfaces and quoted rate deemed to be included the same aspect. (ii) One run of conduit with accessories , three runs of 4 Sqmm copper conductor will be measured as one unit of RM.

Supply and fixing in replacement of LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed mounted type with high efficiency PMMA diffuser( warm white/white as suitable) complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F in replacement of sheet metal enclousure for MCB DB double door single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door type complete all as specified. Make:- Cat No. DHDPSH0DRW08 of Havells/ cat No. 811807 of Indo Asian

S&F in replacement of sheet metal enclosure distribution board with hinged cover IP 43 protection metal door epoxy powder coated/made of insulating meterial like, ploystyrene, double door 4 way TPN with suitable rated bus bar for (vertical operation) incorporation of MCCB 4 pole 125 Amps 25 KA complete all as specified and directed. Make:- Cat no. DHDLVDRWG0F008 OF HAVELLS/ CAT NO. 811890 OF INDO ASIAN. Note : MCCB's,MCB's,Isolators shall be measured and paid separately.

S&F in replacement of MCB SP 5 to 32 Amps 240 volts .

S&F in replacement of MCB SPN capacity 32 Amps 240 volts

S&F in replacement of MCCB 4 pole, 125 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed

M&L in replacement for conleaced sub main wiring with two single core pvc insulated of size 6 sqmm unsheathed copper conductor 1100 volt grade multistandard and incl drawn through and including non metalic rigid pvc conduit and couduit accesssories of 25 mm external dia and conduit accessories of ISI marks medium grade including 4.0 sqmm copper wire for earth continuity wire and connected of common earth dolly. Note:- One run of conduit two run of 6 Sq mm copper conductor & one run of 4 sq mm copper conductor is measured as one unit.

M&L in replacement for Earthing complete with galvanized earth plate electrode 600mmx 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 3 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-0 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe complete all as spfd and as directed. connected to earthing list point all as specified and as directed.

M&L in replacement of surface/wall mounted LED batten type 4 fit long, polycarbonate housing provided with efficient heat dissipation with polycarbonate diffuser & integrated electronic driver of 20 watts rating suitable for single phase, 230 volts, AC, 50 Hz supply including taking down old batten fittings complete all as specified and directed by Engr-in-Charge. Make- HAVELLS CAT NO-LUMILINEBS20WLED865SPCWH

Supply and Fix in replacement of PVC box multi purpose suitable for 15 Amp/05 Amp socket

Taking down the old unserviceable exhaust fan from the existing position and S&F new exhaust fan of size 300 mm sweep, 1400 RPM, metal body, ISI marked with copper winding suitable for 230 Volts, single phase, 50 Hz, AC, Make: Bajaj/ Havells

S&F in replacement of step type electronic fan regulator of the Modular socket type, single phase 220 V complete all as specified and directed by Engr-in-Charge.

S&F in replacement exhaust fan 450 mm sweep 1400 RPM, metal body, ISI marked with copper winding suitable for 230 Volts, single phase, 50 Hz, AC,

M&L in replacement of Bell Multi Music type ISI Marked complete all as specified.

S&F in replacement of LED tube light fitting 1x10 watt LED (2 ft), LED fitting incl LED Tube 10 watt in cool white, 230 volts energy saving, environmental friendly, long life, impact proof, surface mounting , batten suitable for use single LED tube made out from CRCA sheet steel coated for improper resistance against corrosion with PC Housing in opal finish suitable for wet location with britness LEDs with all accessories internally prewired and incl connected with twin core twisted flexible wire copper conductor cable with suitable size complete

S&F in replacement of LED surface/recess (fall ceiling) luminaires for tech zone ceiling 600x600mm system wattage of 40 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained, incl warm/white LED fittings as requirment complete all as specified and directed. Make: Polycab /Bajaj/ Hevells

S&F in replacement electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. complete all as specified and directed by Engr-in-Charge. Make: Havells/Bajaj

M/S S.K.Electricals