8420 REPAIRS TO B/R SERVICES INCLUDING ROOFING CEILING FLOORING AND INTERNAL WATER SUPPLY IN OTM/MD ACCN AT ASI AIPT AND CHUSUL LINES IN THE AREA OF AGE B/R II AT GE (CENTRAL) PUNE

Amount

Taking down cement plaster on brick of stone walls of concrete surfaces etc incl racking out joints, hacking for key, scrubbing down with water etc and removing debris out side defence land complete all as specified.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 including dismantling of brick or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

M & L rendering 15mm thick in CM 1:6 on stone masonry surfaces or other than fair faces of brick / stone surfaces of walls finished the surface even and smooth without extra cement icomplete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer of same make over a coat of thin layer wall care putty complete all as specified and directed .

M & L for rendering 5mm thick in CM 1:3 on on fair faces of bricks or concrete surfaces in ceiling finished even & smooth with thin layer of sagol finish complete all as specified and directed.

M & L for preparation of new plastered surface and applying three coats of white washing on ceiling all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris out side defence land complete all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing debris out side defence land complete all as specified.

M & L for 50mm thick levelling course in cement concrete 1:2:4 , type B-1 using 20mm graded stone aggregates complete all as specified and directed.

M & L for 25mm thick levelling course in cement concrete 1:2:4, type B-1 using 20mm graded stone aggregates complete all as specified and directed.

Material and labour Virified Ceramic tiles of size 600mm x 600mm x 10 mm thick (square/ rectangular) polished, as in skirting, set and jointed in neat cement slurrry and pointed in white or coloured cement to match, over & including 10mm thick backing coat in CM (1:4) all as directed and specified.

All as per item No 11 above but as in skirting over & including 10mm thick backing coat in CM 1:4 on concrete or cement plaster surfaces all as specified and directed .

Material and labour for Non skid coloured ceramic tiles of size 400mm x 400mm x 7 to 8mm thick, (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as directed and specified.

Material and labour for Non skid coloured ceramic tiles of size 300mm x 300mm x 7 to 8mm thick, (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as directed and specified.

M & L for colored glazed ceramic tiles of size 300mm x 450mm x 7 to 8mm thick (Matt Finish) on vertical surfaces set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick backing coat in cement mortar 1:4 on brickwork or stone masonary surfaces complete all as directed and specified..

Dismentling of stone slab or tiles of any description or thickness laid, bedded and pointed in cement mortar in floor, skirting, hard standingg, apron etc complete all as directed and specified..

M & L for 75mm thick levelling course in cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate complete all as specified and directed .

M & L for 20 to 25mm thick machine cut Kota stone of size 400 x 550mm (minimum) as in flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed .

All as per item No 20 above but in riser of steps, skirting , dado and pillar over and including 10mm thick backing coat in cement mortar 1:3 and jointed complete complete all as specified and directed .

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

M & L 20-25mm thick Machine cut cudappah stone slab over and including cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete all as directed.

Dismantling of boarding, any description fixed in any position with nails i.e. in cupboard shutters, partitions, false ceiling and wall lining etc and similar position fixed with screws complete all as directed..

S & F aluminium powder coated snap grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long with including 8mm thick one side prelaminated Gypsum ceiling board of as approved including applying tree coats of white wash complete with following aluminium anodised sections :- (a) Main and cross Tee shall be of size 36.5mm x 23.5mm x 1.5mm thick and 23.5mm x 23.5mm x 1.28mm thick respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling.

S & F 5mm thick prelam PVC sheet in strips & channel , feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVC partitions fixed with Solvent Cement complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive fixed to wall to make PVC frame all as specified and directed.

S & F 18/19mm thick prelaminated PVC moulded solid shelves and drawers boxes fitted under cooking platform and other platform with including 2 Nos telescopic channel, 1 No handles (50mm to 65mm size) complete including dismentling of existing wooden / PVC shutters complete all as specified and directed .

S & F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30 mm all as specified and directed.

M & L for GI tubing 15mm bore dia medium grade concealed including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors including cutting chases, pinning in brick / concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 including taking up or down old steel water tubing and connections complete all as specified.

M & L for GI tubing 20mm bore dia medium grade concealed including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors including cutting chases, pinning in brick / concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 including taking up or down old steel water tubing and connections

Disconnecting existing PVC over head tanks not exc 500 Litre capacity , setting aside (or lowering if required) , dewatering, cleaning and sterlisation with wire brush / fine steel wire brush. Clothes, removing all dirt and scale and algae formation from inside the tank by using TERBAC G5 (a lan tested chemical) including writing with yellow paint on face of the tank wall as "TANK CLEANED ON" with date, month and year with a minimum of 10cm height capital letters / numbers. The seven stage cleaning process shall be follow as under :- 1. First stage to drain out the water by using exit valve or high capacity dewatering system. 2. Second stage is cleaning all the algae formation inside the tank by using TERBAC G5 a laboratory tested branded chemical of the company and scrubbing the walls of the tank. 3. Third stage is fresh water cleaning by high speed jet pump. 4. Forth stage and first bactria screeding is decertification by using TERBAC G5 a Govt laboratory certified branded halogen compound. 5. Fifth stage is cleanng the floor of water tank by industrial vaccume cleaner. 6. Sixth stage is the second bactria screening and sterilizing method by using ultra violet ray within tank and kills all suspended bacteria. 7. Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified, branded strong oxidizing agent TERBAC G65.

All as per item 33 above but exc 500 Litres upto and including 1000 Litre capacity

All as per item 33 above but exc 1000 Litres upto and including 2000 Liters capacity .

Note for Item No 33 to 35 : - (i) Cost of staging and necessary working platform shall be deemed to be included in quoted rate by contractor. (ii) Contractor shall insured necessary safety precautions and insurance to workers during execution. (iii) The quoted rates shall be deemed to be included the cost of writing date of cleaning, due date and capacity of tank on the wall surface of the OH tank (iv) Duration of cleaning shall be 6 months

S & F fixing in repair PVC OH tank cover of same colour of tank made of best quality PVC and fixed in position at any height secured tightly with tank complete complete all as specified.

Dismantling water tanks exc 250 and not exc 500 Litres capacity and removing from site complete all as directed.

Dismantling water tanks exc 500 and not exc 1000 Litres capacity and removing from site complete all as directed.

S & F 500 Litres capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc complete all as specified and directed.

S & F 1000 Litres capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc complete all as specified and directed.

S & F in repairs stainless steel kitchen sink with drainage board made of stainless steel 1.00mm thick with plugs washers and waste including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm , bowl size 410 mm x 330mm x 160mm complete all as specified and directed..

S & F in repair vitreous china squatting pan "ORISSA" pattern size 580mm x 440 mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap (but excluding flushing cistern and flush pipe) includintg cement concrete bedding etc if required and including making good to floor complete all as specified and directed.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, seat cover and jet spray etc (excluding flushing cistern and flush pipe) complete connected to drain complete all as specified and directed.

Supply and Fix in repairs vitreous china coloured Wash hand basin flat back, size 550 x 400mm white excluding pillar taps & waste pipe but including Waste coupling chromium plated and fixing brackets complete all as specified and directed.

S & F in repairs Vitreous china , coloured colonia snow white , Wash Hand Basin , Counter Top , Oval shape of overall Size 595mm x 380mm excluding pillar taps & waste pipe but including Waste coupling chromium plated and fixing brackets complete all as specifiedand directed.

S & F in repairs 15mm , bib taps , cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as directed and specified.

S & F in repairs 15mm , angle cock , cast copper alloy , fancy type , chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15mm stop valve , Long shank concealed type, fancy type , chromium plated , cast copper alloy with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs 15mm dia PVC connections with PTMT nuts , length 450mm all as specified and directed.

Supply and fix in repairs 15mm pillar taps of cast copper with capstan head, chromium plated, fancy type, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed.

S & F in repair 10 Litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

S & F in repair 20mm ball valve, brass, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified

Supply and fix in repair 20mm gun metal, globe or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and Fix in repairs vitreous china bowl urinal , with fixing accessories Half stall type, including PVC down waste pipe, fixing plugs etc (but excluding flushing cistern and flush pipe) and fix to walls and connect complete all as directed and specified

S & F in repair Stainless steel plate rack of size not less than 900 x 900mm made out of sheet grade SS-304 thickness not less than 0.63mm approved quality finish complete all as specified and directed.

M & L for Preparation of old plastered or unplastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed.

M & L for Preparation of old plastered or unplastered surfaces of wall and applying one coats of oil bound distemper complete all as specified and directed.

M & L for Preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

M & L for Preparation of old plastered surfaces of ceilling and applying two coats of white wash complete all as specified and directed.

Taking down shutter of any description and removing from site not exc. 1.00 Sqm & removing from site all as directed.

Taking down shutter of any description and removing from site exc. 1.00 Sqm & not exc. 2.00 Sqm & removing from site all as directed.

Taking down Shutters of any description area not exc 1 Sqm each and refixing in the same opening after carrying out necessary Resecuring or easing & adjusting / minor repairs etc all as specified and as directed.

Taking down chowkats or frames with shutters (w/o taking off shutter from the frame) area not exc 1.50 Sqm each & removing from site all as directed.

Taking down chowkats or frames with shutters (w/o taking off shutter from the frame) area exc 1.50 Sqm but not exc 4.00 Sqm each & removing from site all as directed.

M & L for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and fix 35mm thick 2nd class hardwood factory made plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS: 103 ( Part -I) kiln seasoned and chemically pressure treated complete fixed to chowkats all as specified and directed.

S & F 30mm thick flush shutters, solid core onstruction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping / frame to match complete all as specified and directed.

Supply and fix 35mm thick 2nd class hard wood factory Made glazed and skelton shutters , open rebated and prepared to receive gauge (Without sash bars of any nos)) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solvent cement complete all as shown in drg given on page 176 of SSR 2020 Part-II The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. Each PVC door shutter leaf consist of 4 Nos 100mm long MS butt hinges complete all as specified and directed.

S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 180 of SSR 2020 Part-II complete all as specified and directed.

Dismantling aluminium section any description complete all as specified and directed.

S & F aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S & F Powder coated aluminium door shutters, (single / double leaf) aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminum snap beading , screws etc. complete all as specified. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F three track sliding window with two or more shutter, one with 5mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F louvers glass ventillators with partially guaged shutter using 5mm thick x 10cm wide frosted glass strips with following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc complete all as specified and as directed. (a) SP 20048 (b) Glazing clips 19352

Supply and fixing stainless steel wire 0.71mm nominal dia of wire average width of aperture1.18mm fixed with tinned tacks complete all as specified.

S & F in repair door closer (aluminium extruded section body) hydraulically regulated, designation No. 3 , universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed

S & F 100mm brass mortice lock, vertical type, four lever complete all as specified and directed.

S & F 150mm extruded aluminium alloy powder coated handles , fabricated type complete all as specified.

S & F 150mm long aluminium powder coated barrel tower bolt of extruded section all as specified and directed .

S & F 100mm Mild steel butt hinges medium weight , cold rolled complete all as specified and directed .

Supply and fix 150mm floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate complete all as specified and as directed. .

Supply and fix in repairs 25mm dia decorative type curtain rod , stainless steel , with not less than 1.00mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

Supply and fix in repair 300mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed..

Supply and fix in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified.

Supply and fixing 4.00mm thick sheet glass ordinary quality glazing with rubber / neoprene gasket in aluminium window / ventilator shutters / or glazing with oil putty in steel windows etc area in squares not exc 0.50 Sqm in each pane all as specified and directed.

Supply and fixing in repair 3.00mm thick sheet glass ordinary quality and glazing with oil putty and atleast 06 Nos MS glazing clips per window pane fixed with steel window frames complete all as specified.

Supply & fix in repair 300mm long aluminium alloy powder coated sliding door bolts with hasp and stapple (bolt type) and fxing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S & F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc complete all as specified and as directed.

M & L preparation of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and as directed.

M & L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer omplete all as specified and as directed.

Dismantling of corrugated, or semi corrugated AC sheet in roof covering complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof coverimng complete all as specified and directed.

S & F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete as specified and directed.

S & F prepainted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, bent to shape as required and directed fixed with self tapping screws all as specified and directed.

S & F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' Type or cranked hook bolts and washers in covering / cladding to wall, etc with grade of zine coating 275 complete all as specified and directed.

All as per item No 102 above but except sheet of any thickness complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for MS structural steel work as in framed trusses, purlins, rafter, post , crane grantries, rails and fastening and heavy bracket framing etc including distance pieces , cleats, wind ties etc (Beam, Tee, Angle, Channel or Flat section) incliding shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gusset plate and also erecting in true position conforming to grade Fe-410W (Grade E-250, quality A) complete all as specified and as directed.

M/S NAVNEET S MORDE

Suma Construction

Parhar Enterprise

KSP ENTERPRISES