Survey, Drawing and Design of distribution network for water supply from RCC Ground Level Service Reservoir situated at Satayanarayan Ki Tekri, Ward No. 02, Gwalior Municipal Corporation including providing of HDPE and DI pipes laying, testing and co

Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed. All kinds of ordinary soil 0 to 1.5m

Hard rock 0 to 1.5m

Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete. Crusher Stone Dust

Dismantling of cement concrete pavement i/c breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead upto 1000 meter, stacking serviceable and unserviceable materials separately and as per relevant clauses of section-200.

Providing, Supplying and laying Blue MDPE (medium density polyethylene) pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality assurance certificate from quality agencies like CIPET (India) and other recognised agencies for usage in Drinking Water System. The cost shall include testing of all materials, Inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. complete. PN 16 (SDR 9) 20mm dia

Providing, Supplying and fixing of Electro Fusion Tapping Ferrule (Branch Tapping Saddle) female BSP Threaded with SS 304 insert fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE 100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR 11 with min PN 12.5 rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. Electo Fusion Tapping Ferrule Saddle ( 110x20mm )

Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) PE-100 110 mm dia

125mm dia

140mm dia

160mm dia

Providing and laying End Cap confirming to IS specifications. PE-100 110 mm dia

125mm dia

140mm dia

160mm dia

Providing and laying Bend 45ْ confirming to IS specifications.110mm

125mm dia

140mm dia

160mm dia

Providing and laying Equal Tee confirming to IS specifications. 110 mm

125mm dia

140mm dia

160mm dia

Providing and laying Bend 90ْ confirming to IS specifications. 110mm

125mm dia

140mm dia

160mm dia

Providing, laying, jointing & testing of socket & spigot centrifugally cast (Spun) Ductile Iron pressure pipes with inside cement mortar lining (class K-7) with suitable Rubber Gasket (Push on) joints as per IS:5382/85 including testing of joint. 100mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Providing & laying Ductile iron Mechanical joint collar with follower glands conforming to IS-9523/2000 having dimension as per table 24 of IS-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. 100mm

Providing, Laying and testing ductile iron flanged spigot conforming to IS-9523/2000 having dimension as per table 24 of IS-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of IS-9523/2000. 100mm

Providing & laying Ductile iron Dismantling joints. 100 mm

Providing, Laying & Testing Ductile Iron Double Socket 90° Bends conforming to IS-9523/2000 having dimension as per table 15 of IS-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. 100mm

Providing & Laying Ductile Iron Double Socket 45° Bends conforming to IS-9523/2000 having dimension as per table 16 of IS-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. 100mm

Providing & fixing of following Ductile iron double flanged sluice valves glandless, resililent (soft seated) non-rising spindle with body bonnet of ductile iron of grade GGG 40/SGI 400/12 or equivalaent grade or of higher tensile strength grade, as per IS: 3896 part-II-1986 and subsequent revision, wedge fully rubber lined with EPDM food grade quality and seals of NBR. The valve should be with replaceable nut and replaceable sliding shoes, valve stems shall be of single piece thread rolled. Sluice valve shall bem compitable for buried applications without valve chambers. The valve should be vaccum tight and 100% leakproof with face to face dimensions as BS: 5163-89/ IS: \14846 /2000 /DIN 3204 F4 and flange connections as per IS: 1538. Valve should be with electrostatic powder coatilng both inside and outside (thickness 250 micron)with pocketless strailght thro body passage including jointing and testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete. 100mm

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Providing & fixing cast iron double flanged single door reflux (non return) valves including jointing & testing with cost of jointing material such as bolts, nuts and rubber insertion all complete. 100mm

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Transportation By Mechanical means including loading, unloading and stacking where ever necessary Excavated Eart 3km

Providing and laying in position M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement

Providing and laying Cement Concrete grade M-10 Nominal mix 1:3:6 with 40 mm graded crushed stone aggregate, spreading the concrete by shovels mixing shall be in mechanical mixer, compacting by use of pin/plate/screed vibrators including form work by strong steel girders fixed by spikes.

Providing and laying Cement Concrete grade M-20 (Nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bituminous sealant (without dowel bars). (max. thickness 20cm)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete.Mild steel and Medium Tensile steel bars.

Brick work with well burnt chimney bricks in bulls patent trench kiln ,crushing strength not less than 25kg /sqcm and water absorption not more than 20% in foundation and plinth Cement mortar 1:6(1 cement : 6 coarse sand)

12 mm cement plaster of mix :1:6 (1 cement: 6 sand)

Fabrication of M.S. pipes & specials as per IS specifications with inside & outside epoxy coating as per relevant IS code, duly tested for usage in Drinking water inclusive of all materials, inspection charges, transit insurance, loading / unloading, FOR site, & stacking etc. complete as for direction of Engineer-inCharge. Fabricating pipes from steel plates (all thickness) 5 to 8 mm

Fabrication of M.S. pipes & specials as per IS specifications with inside & outside epoxy coating as per relevant IS code, duly tested for usage in Drinking water inclusive of all materials, inspection charges, transit insurance, loading / unloading, FOR site, & stacking etc. complete as for direction of Engineer-inCharge. Fabricating pipes from steel plates (all thickness) 8 to 12 mm

Providing, Supplying and fixing of PVC Ball Valves in PN16 rating with one end compression using Blue colour compression nut in polypropylene material & other end with female threads conforming to ISO:4422-4, certified from certified agencies suitable for food products & drinking water, female threads in accordance with ISO:7/BS:21/ IS: 554 and shall be inclusive of all cost of testing of all materials, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. complete. PVC Ball Valve with Compression & Female Threads 20x15mm

Providing, Supplying and fixing of Clamp Saddle (DI Strap Saddle) for House Service connections from metal pipe Water Distribution mains shall be of fastened strap type with threaded outlet for service connection. Clamp Saddle shall be suitable for nominal size of distribution mains pipe line. The strap shall be elastomer coated (insulated) type for firm grip on pipe as well as to protect the coating on the pipe and to insulate the unidentical metals. The saddle shall be single strap type upto pipe sizes of NB 600 and service outlet 15mm, 20mm & 25mm. Fasteners shall be of threaded nutbolt- washer type. The sealing between the saddle and mains shall be obtained by using a profiled elastomer seal matching to the curvature of the pipe. The seal shall be of elastomer type, suitable for all potable water application. The material of construction of the body, straps, fasteners etc, shall be of non corrosive material such as engineering plastic (PE/PP) or stainless steel or a combination of both. 100 NB x 15mm, 20mm, 25mm

Providing, Supplying and fixing of Compression fittings, PN16 rated in conformation to ISO:14236-2000 and shall be tested as per ISO:3459, ISO : 3501 & ISO: 3503, suitable for drinking water & approved by certified agencies, in food grade polypropylene and shall be inclusive of all cost of inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Compression Fittings Metal inserted Compression Female Threaded Adaptor with SS 304 Material 20x15mm

Providing, Supplying and fixing of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE 80 / PE 100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR11 with min PN 12.5 rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. Electro Fusion Elbow 90 Deg.20mm

Providing & fixing detachable joints to asbestos cement pressure pipes and fittings including C.I. detachable joints confirming to IS/8794/1988 with bolts, nuts and rubber rings. class 20 100 mm

Please Enable Macros to View BoQ information