WELCOME MAINTENANCE TO MD ACCN IN AOR OF AGE B/R-II UNDER GE (W) JABALPUR

Amount

NOTE :- (a) Contractor will procure and deposit entire quantity of materials (proprietory materials) in sealed containers required for painting work covered under subject contract in the custody of Engineer-in-Charge/office. (b) The materials as required shall be issued to contractor by JE/Engineer-in-Charge on daily basis and the empty containers/bags shall be deposited in the store of Engineer-in-Charge by the contractor, for verification as per standard comsumption/coverage prescribed by the manufacturers. (c) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. (d) Contractor will complete welcome maintenance of a qtr within 10 days.

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and one coat of white wash on walls complete all as specified and as directed.

Ditto all as per above item but on ceiling.

M&L complete removal of old decorated surfaces of wall and applying two coats of oil emulsion distemper white/coloured over a coat of white cement based putty (where it is required) complete all as specified and as directed. (Note:- Putty shall be measured and paid seperately under relevent item)

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying one coat of oil emulsion distemper complete all as specified and as directed.

Preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted surfaces of steel exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L Preparation of old plastered surface wall and applying Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying one coat of exterior weather proof water based emulsion paint complete all as specified and as directed.

M&L complete removal of old decorated surface of wall and applying two coat of interior plastic Emulsion paint white/coloured over and one coat of white cement based putty (where it is required) complete all as specified and as directed. Note:- Putty shall be measured and paid seperately underrelevent item)

M & L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling with putty and applying one coat of interior plastic imulsion paint white/coloured complete all as specified and as directed. Note:- Putty shall be measured and paid seperately under relevent item)

Ditto all as per above item but one coat of plastic emulsion paint on ceiling.

M&L for one coat of 2mm thick wall care putty on walls/ceiling surfaces complete all as specified and as directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, Finishing walls with textured exterior paint of required shade : (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm Compete all as specified and as directed

Taking down chowkats or frames (without taking off shutters from the frame) exc 1.50 Sqm but n.exc 4 Sqm each Complete all as specified and as directed

Taking down chowkats or frames (without taking off shutters from the frame) of size nexc 1.50 Sqm each Complete all as specified and as directed.

Taking down shutters of any descripition of size exc 1sqm but n exc 2sqm each Complete all as specified and as directed.

Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and as directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and as directed.

Taking down shutters of any description and refixing in the same opening of size exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F for 15 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.

S&F for 20 mm bore GI tubing medium grade, galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc excluding ashlar faings, precast concrete articles complete all as specified and as directed.

M&L for fly ash brick work with modular 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L for fly ash brick work with modular 'B' bricks built in cm 1:6 using modular bricks straight or curved on plan to any radius complete all as specified and as directed. .

Demolition of cement concrete in ground floors and pavings (un reinforced) nexc 15 cm thickness (below or above ground level) complete all as specified and as directed..

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15mm thick cement screed base or bedding layer in CM 1:6 including rubbing & mirror polishing complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including 10mm thick plastering in CM 1:6 as in skirting and dados including rubbing & mirror polishing complete all as specified and as directed.

M&L for 75mm thick Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, , finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25mm thick cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) as in floor to receive rough finish complete all as specified and as directed.

M&L for 15mm thick Screed bed or beding layer in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surface in CM 1:3 complete all as specified and as directed.

M&L for 8 to 10 mm thick vitrified light shade tiles (square/rectangular) polished, area of each tiles not exceeding ).36 Sqm, in floors etc, set and jointed in neat cment slurry and pointed in white or coloured cement to match the floor complete all as specified and as directed.

M&L for 8 to 10mm thick vitrified light shade tiles (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and as directed.

M&L for 8 to 10mm thick vitrified light shade tiles(square/rectangular) polished, area of each tiles exceeding .36 Sqm but exc not exceeding .42 Sqm, in floors etc, set and jointed in neat cment slurry and pointed in white or coloured cement to match the floor complete all as specified and as directed.

M&L for 8 to 10 mm thick vitrified light shade tiles(Square/rectangular) polished, area of each tiles exceeding .36 Sqm but exc not exceeding .42 Sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and as directed.

M&L for 7 to 8mm thick Non skid coloured ceramic tiles (Square/Rectangular) area of each tile exe 0.06 Sqm but n Exc 0.11 Sqm in floors etc. set and jointed in cement slurry and pointed with white or coloured cement to match complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exe 0.11 Sqm but not exe 0.18 sqm in floors etc. set and jointed in cement slurry and pointed with white or coloured cement to match complete all as specified and as directed.

Ditto all as per above item No 43 but on vertical surfaces.

M&L glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and as directed.

M&L for Granite work 18-20 mm thick (of any type/ colour) (table rubbed and polished/ moulding) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing n white cement (1:2) using marble dust with admixture of pigment to mactch with shade or granite complete all as specified and as directed.

M&L for 8 to 10 mm thick Endura joint free colour tiles (square/rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and as directed.

M&L for 8 to 10 mm thick Endura joint free colour tiles (square/rectangular) area of each tiles not exceeding 0.11 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and as directed.

M&L for laminated wooden flooring including polishing all as per manufacturers direction, including taking old flooring complete all as specified and as directed.

S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. complete all as specified and as directed.

Hacking out old broken glass (any thickness quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F for 3mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane complete all as specified and as directed.

S&F for 4.0mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane complete all as specified and as directed.

S&F for 4.0 mm thick plain sheet glass ordinary quality exc 0.50Sqm in each pane complete all as specified and as directed.

S&F for solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S & F for 2nd class HW plain, solid straight chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed..

M&L for 2nd class hardwood plain fillets, square, rectangular or triangular in section, wrought, fixed with nails, cross sectional area exceeding 13 sqcm but not exceeding 25 sqcm, complete all as specified and as directed.

S&F for 2nd class HW factory made 35 mm thick plain framed, panneled shutter (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as specified and as directed.

S&F for 2nd class HW factory made 35 mm thick glazed and skelton shutter, open rebated and prepared to receive glass, gauges, etc ( with or without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitreated beads for securing glass, etc fixed to chowkats all as specified and as directed.

S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete and fixed to chowkats all as specified and as directed.

S&F for Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and as directed.

S&F for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded palin colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame wlded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing tin the frame at site as per specified and as directed.

S&F for Factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4 or 6 raised panel design with 2mm thick 3D plain colour PVC sheet on the front face and 2 mm plain colour PC sheet on back face complete all as specified and as directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proofand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all specified and as dirtected.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all specified and as dirtected.

S&F for 100mm long Butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all specified and as dirtected.

S&F for 100mm size butt hinges medium weight cold rolled mild steel complete all specified and as dirtected.

S&F for 125mm size butt hinges medium weight cold rolled mild steel complete all specified and as dirtected.

S&F for 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and as directed.

S&F for 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and as directed.

S&F in repair to Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and as directed.

S&F for 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

S&F for 300mm., ordinary MS rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M & L in repair 25mm stainless steel curtain rod decorative type incl 2 Nos curtain fancy type brackets and 2 Nos of NObs complete all as specified and as directed.

Dismantling wall and ceiling boards of any description fixed in any position, any thickness including cover fillets complete all as specified and as directed.

S&F GI frame work size of grid 605 mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylong sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two ea\qual flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

Supplying and fixing 12mm Gypsum board ceiling fixed with GI angle/channel frame work incl GI wire/ mesh, etc in different levels all complete including joints filled with paster of paris, putty including POP work/Cornices and applying two coats of oil bound distemper complete all as specified and as directed.

S&F for galvanised cold rolled steel section framed work size 600x600mm grid size 24x38x0.60mm Tee (bottom precoated) and 24x24x0.50mm thick wall angle galvanised cold rolled steel section incl expansions fasteners as in ceiling complete all as specified and as directed.

S&F for 6mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and as directed. (Note: Frame work for ceiling shall be measured and paid separately)

S&F for 40mm wide of flap continuous (piano) hinges, brass , bright finish complete all as specified and as directed.

S&F in repair 18/19mm thick regid prelaminated coloured solid PVC board as in cupboard, cabinet drawer etc as per manufacturer instrument/ specification complete all as specified and as directed.

S&F for 100 mm brass handle , cast type, polished bright complete all as specified and as directed.

M&L for 2nd class soft wood nexc 3 Sqcm wrought filets but bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and as directed.

Taking down cement plaster on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick rendering in two (10mm+5mm ) in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed..

M&L for 5 mm thick rendering in CM 1:3 on fair face of brick/ concrete surfaces as in ceiling complete all as specified and as directed.

S&F in repairs vitreous china squatting pan of Orissa pattern 580x440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedastal pattern), white (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe complete all as specified and as directed.

S&F in repairs Vitreous china wash hand basin white flat back of size 550 x 400mm excluding tap but including brackets/CP brass 32mm waste coupling complete all as specified and as directed.

S&F for 400 mmx 350mm mirror with PVC cabinet of standard make including all fittings and accessories complete all as specified and as directed.

S&F in repairs Stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and as directed.

S&F in repairs 15 mm Angle valve/ stopcock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15 mm pillar taps cast copper alloy, with capstain head .chromium plated screw down high pressure, with or without lettered HOT or Cold with long shanks and fly-nuts screwed for iron pipes and fixed complete incl necessary small GI fittings complete all as specified and as directed..

S&F in repairs 15 mm CP Sink cock with raised "J" shapped swinging spout (wall mounted model) with connectng legs & wall flanges complete all as specified and as directed.

S&F in repairs 15 mm CP single lever sink mixer with swingng spout on upper side (wall mounted model) with connectng legs & wall flanges complete all as specified and as directed.

Supply and Fixing in repair Mixing valve including three joints to steel pipes or unions and plugging and screwing to walls all as specified and as directed.

S&F in repair 15 mm wash basin mixutre, single lever extended basin mixer (height 95mm ) with popup wase system with 450mm long braided hoses , chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed complete all as specfied and as directed.

S&F in repair CP Health faucet suitable for 15mm bore with connecting pieces including all necessary fittings and accessories complete all as specified and as as directed.

S&F in repair to Stainless steel connections 15mm size with PTMT nuts of length 450 mm.complete all as specified and as directed

S&F in repair to Stainless steel connections 15mm size with PTMT nuts of length 600 mm.complete all as specified and as directed.

S&F in repairs Plastic water closet seat cover, any colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and as directed.

S&F in repair stainless steel single towel rail 600 mm long and 20mm dia complete all as specified and as directed.

S&F in repair CP towel ring round with round flange complete all as specified and as directed.

S&F in repair to CP Towel rack 600mm long with lower hangers complete all as specifed and as directed.

S&F in repair CP toilet paper holder with stainless steel flap complete all as specified and as directed.

S&F in repairs overhead square shower with rubit cleaning system of size 150mmx150mm complete all as specified and as directed.

S&F in repairs 15mm single lever wall mixer exposed shower with provision for connection to exposed shower pipe & hand shower with connecting legs & wall flanges complete all as specified and as directed.

S&F in repairs 15mm single lever wall mixer exposed shower with provision for connection to exposed shower pipe with connecting legs & wall flanges all as specified and as directed.

S&F in repairs 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15 mm Angle valve two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repair soap dish holder of bootom Cp and glass holder for soap complete all as specified and as directed.

S&F in repair to soap dispender with glass bottle complete all as specified and as directed.

S&F in repairs glass shelf (with bracket) of 22 inch long chromium plated complete all as specified and as directed.

S&F in repair corner glass shelf (with bracket) complete all as specified and as directed.

S&F for wash down water closet with seat cover , waste pipe, cistern with lid & fittings (complete set) and fixing complete all as per manufacturere instructions complete all as specified and as directed.

M & L for applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre on newly plastered wall surfaces including preparation , of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed.

M & L for applying two coats of Acrylic Smooth exterior paint of required shade@ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm on newly plastered wall surfaces including preparation complete all as specified and as directed.

Dismantling Asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and as directed.

Dismantling timber santiling in fillets rails, posts, rafters, purlins, etc under 40 Sqcm in section as in unframed work complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on New or previouly untreated surfaces of steel and iron surfaces of any description and over a coat of red oxide zinc chrome primer including preparation complete all as specified and as directed.

S&F for Pre-painted galvatume aluminiu Zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F for Pre-painted galvatume aluminiu Zinc coating GI based plain steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering,doors, etc to be prepared for hanging or sliding with and including either hooks and hingsor steel hanging door fittings(including of steel sheeting or other covering.(Fe-410-W(Gde-E250) complete all as specified and as directed.

M&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F for MS work as in bands, straps, clamps, hold fasts, wall ties, hooks for hanging fans and similar articles complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and as directed.

S&F for 75 mm PVC(SWR) pipes Single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and as directed.

S&F for PVC(SWR) 110mm pipes Single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and as directed.

S&F for 75mm PVC(SWR) bend complete all as specified and as directed.

S&F for 75mm PVC(SWR) junction single (single 'T') equal or unequal complete all as specified and as directed.

S&F for 75mm PVC(SWR) vent cowl complete all as specified and as directed.

S&F for 110mm PVC(SWR) vent cowl complete all as specified and as directed.

M&L for PVC (SWR) floor trap 75mm bore plain with grating incl jointing with solvent cement complete all as specified and as direcetd.

S&F for PVC(SWR) 110 mm bend complete all as specified and as directed.

S&F in repair looking mirror approved quality with wooden back and edge, complete polishing , complete all as specified and as directed.

M&L for grinding and polishing kota/marble/terazoo/mosaic flooring complete all as specified and as directed.

Dismantling water tanks of Exc 500 litres but n exc 1000 litre capacity and removing to store complete all as specified and as directed.

S&F for 500 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F for 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S & F for 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe with epoxy coated aluminium rod complete all as specified and as directed.

S & F in repair gunmental, globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 12mm thick toughfen glass in door, partitions etc similar work etc in approved shape and design complete all as specified and as directed.

S&F in repair stainless steel plate rack assembeled set of (Size: 31 x 36 x 10 inch) fixed with screws complete all as specified and as directed

S&F in repair stainless steel plate rack assembeled set of (Size: 24 x 30 x 10 inch) fixed with screws complete all as specified and as directed

M&L for Stainless steel hand rails, Grade 304 confirming to IS, approved design including ornamental fittings, globes and all necessary drilling, bolting, riveting, welding etc and fixed as in floor, steps etc as in similar work complete all as specified and as directed.

S & F for kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 100mm including telescopic channel of 20 inch length complete all as specified anda as directed.

S & F for kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 150mm including telescopic channel of 20 inch length complete all as specified and as directed.

S & F for kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 200mm including telescopic channel of 20 inch length complete all as specified and as directed.

S&F in repair 18mm plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and as directed.

S&F in repair 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and as directed.

S&F 105*60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. complete as specified made out of 1.25mm thick ms sheet complete all as specified and directed

S&F for pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. complete as specified made out of 1.25mm thick ms sheet complete all as specified and as directed

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty complete all as specified and as directed.

S&F in repiar to Aluminium (Extruded section body ) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg complete all as specified and as directed.

M&L for Cabinet Hinges Soft Close SS 8 Crank complete all as specified and as directed.

Taking down existing old roof treatment of any description , any type including removal old Tar felt, screed bed and plastering etc complete all as specified and as directed.

M & L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532: 2017 over a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using Butane Torch and sealing all joints, overlapping etc. as per Annex D of IS 16532: 2017 complete all as specified and as directed.

M & L for ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the complete Roof slab at least for 72 hrs complete all as specified and as directed.

M & L for cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate ) benching/ angle filleting at the junction of parapet and RCC roof complete all as specified and as directed.

M & L for cutting grooves or chase in brick wall, 75 mm wide and 65 mm deep and including filling with cement mortar 1:4 mixed with water proofing as mentioned in Annex D of IS 16532: 2017, IS 16540: 2017 compound complete all as specified and as directed.

Material & labour for 10 mm thick rendering in cement mortar 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction all as specified. (Note;- water proofing compound shall be measured and paid separately )

M & L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate mixed with water proofing compound as levelling course of roof padding finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid separately.

M&L for grout of permanent bonding of strutural damage/crack, porosity of concrete to attend leakage/seepage with pressure grouting with 15mm bore GI Pipe Nozzle under the pressure of 5 kg/sqcm using cement based grout, treatment to be made as per instruction complete all as specified and as directed.

Petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and as directed.

Petty reapirs to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and as directed.

M & L for tiles cleaning by using appropriate chemical of approved make with using prescribed machine also as necessary to remove stain/ dust etc and maintain beauty of tiles in MD Accn Complete all as specified and as directed.

Taking down existing aluminium door shutter with frame area not exceeding 1 Sqm and re-fixing in same opening after repair/replace complete all as specified and as directed. Note :- The defective parts (any type of aluminium section) complete Aluminium parts shall be measured and paid separately.

S & F in reapir Pulley operated clothes drying system consisting of anodized Aluminium pipes, each of outer dia 22 mm and inner dia 19.8 mm. Pulleys made up of delrin with rope guide mounted on channel pair of length 24” (distance between two pipes is adjustable). Locking system to hide rope knot. Channel to be mounted or fixed with self-tapping screws provided in kit. Rope will be polyester braided undyed of 4mm dia complete all as specified and as directed.

S&F in repair Wall mounted stand consisting of 16 mm dia powder coated MS rods of CR Steel mounted on powder coated MS square pipe for drying clothes complete all as specified and as directed.

Material and labour for removal of damaged Concrete-surface Preparation: Removal of existing affected, distressed, loose cover concrete including loose damaged concrete from all structural members up to beyond the corroded steel reinforcements to a depth of 10 mm minimum behind the reinforcement only at affected concrete (Good & sound concrete should not be chipped / damaged) by chipping / hacking with chisel and hammer or by mechanical means like light weight chisel hammer, chippers, making saw cut at periphery to avoid feather edge and removal and disposal of debris at plant area including labour, tools, electricity, plant and machineries etc. complete all as specified and as directed. Note: Depth of chipping may vary from 20 to 100 mm.

G.S.CONSTRUCTIONS (BID ID -3222941)

chandan construction (BID ID -3223056)

ISHWAR CONSTRUCTION COMPANY (BID ID -3221086)

chandra builders (BID ID -3216946)

deepak kumar vishwakarma (BID ID -3211890)

upadhyay Builders (BID ID -3217102)