Providing IEI to Store Complaint Cell and Parking Shed including Gate Lights and Campus Lighting at Section Office Manglutan under Electricity Department

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group-C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

c) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc., as required. (But without MCB/ RCCB/ Isolator). a) 4 Way, Double Door.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 4 way (4 + 12), Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole

b) Triple pole and Neutral

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required a) 40 Amps

Supplying and fixing Plastic Board of 3.5" x 6" on surface including providing and fixing 5 Pin 5/6 (2&3 Pin) amps socket outlet and 5/6 A, PT Switch, connection painting etc., as required.

Supplying and fixing Plastic Board of 3.5" x 8" on surface including providing and fixing 6 pin and 6/16 amps socket outlet and 16 Amps, PT switch connection, painting etc., as required.

Supplying and fixing of surface mounted LED Batten Fitting of 20 Watt T-8 Lamp Similar to Crompton Cat No. DMLN1LT8-16 with 20 Watt Retro Fit LED Lamp Crompton Cat No. LT8-20-865-2 or its equivalent.

Supply and fixing Bake lite Batten/ angle holder including connection etc., as required.

Supplying of 12 Watt LED Lamp in the existing Batten Holder similar to C&S Cat No. LTHPLEDLAMP12W/B22 as required.

Supplying and fixing of LED Decorative Post of Lantern Fitting 30 Watt similar to C&S CETUS M-Series Cat No. LTGLM30WHPLED/W with suitable GI Pipe support with collar for fixing the fitting on the Gate piller as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying of A.C Ceiling fan (1200 mm) sweep (Color: Opal White, Brown) 5 Star rated without regulator as required. Similar to make Crompton Empower 50-5 Star & ISI Marked or its equivalent

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2 mtr, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Fabrication and Erection of Street Light Pole 5 mtr long made out of medium class GI Pipe of size 65 mm dia 3 mtr and 50 mm dia 2 mtrs with 01 No. 32 mm dia 1 mtr long GI pipe medium class for mounting of 35 watt LED Street Light fitting clamped on the pole including bending the pipe to the required shape and 300 mm x 6 mm base plate welded to the bottom, making holes and fixing sintex box of size 170 x 170 x 105 (mm) with 01 no. 6 amps MCB DP, Nut and Bolts for fastening the base and 63 Amps four pole connector i/c painting with one coat of metallic primer and two coats of metallic white paint and erection of metallic pole with cement concrete 1:3:6 (1 Cement: 3 Course Sand: 6 Graded Stone Aggregated 40 mm nominal size) foundation and collor of 30 cm above the GL including excavation and refilling etc. as required (Foundation 70 cm below GL and above 50 cm GL)

Supplying of following sizes of XLPE insulated Heavy duty armoured aluminium conductor UG Cable of 1.1 KG Grade conforming to IS: 7098 (part-I) and IS No. 1554 (part-I) 1988 as applicable Make: CCI/ GLOSTER/ Havells/ Polycab/ Finolex. a) 10 Sq.mm x 2 Core

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Upto 35 sq. mm

Supplying and Laying of One Number Double Walled Corrugated High Density poly thylene pipe having corrugation on the outer wall and plain surface inner wall conforming to IS No. 14930 Part I complete with necessary HDPE fitting for protection of 1.1 KV grade underground cable directly in ground at the depth of 50 cm in the existing cable trench etc., as required a) 40/32 mm outer dia

Supplying and Laying of One Number Double Walled Corrugated High Density Polyethylene Pipe having Corrugation on the outer wall and plain surface inner wall confirming to IS 14930 part-I complete with necessary HDPE fitting for protection of 1.1 KV grade underground cable directly on the surface or wall etc., as required a) 40/32 mm outer dia

Providing and fixing hot press moulded sintex single phase SMC meter box Hinged (L) of size 310 x 285 x 180 mm (out side) for accommodating one LT single Phase KWh meter with cut out similar Cat No. GSJB 2525 etc., as required.

M K ENGINEERING

M/s G K Construction

POWER ENGINEERING CO

M/s Sai Electrical Works

MILESTONE ENGINEERING

ELECTRICAL PLAZA