REPAIR/ REPLACEMENT OF CHAIN LINK FENCING, PATH, COMPOUND WALL, DRAIN AND OTHER MISC WORK FOR E/M ELECTRIC INSTALLATION UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT

Amount

Dismantling of asbestos cement (corrugated, semi corrugated, etc) sheets/PVC sheets or any type in roof covering, complete all as specified and as directed.

M&L for prepainted galvalume aluminium zinc cating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

M&L for prepainted galvalume aluminium zinc cating GI based plain steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof ridge, fixed with self tapping screws as specified and as directed.

Taking down cement plaster on brick/stone masonary including raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on brick work or concrete surfaces finished even and fair without using extra cement complete all specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over priming complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level) all as specified

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished even and fair to receive top layer complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation all as directed.

M&L 60 mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L for rubber moulded coloured cement concrete chequered tiles 300x300x22 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 15mm thick screed bed to floor finishes in cm 1:4 complete all as specified and as directed.

M&L for broken stone or boulders loose filling with aggregates of gauge 40 to 80 mm near to transformer area, soakage pits, soakage wells complete all as specified and as directed.

M&L for 75mm thick PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in flooring, paving, path etc surfaces finished even and fair without using extra cement complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

S&F 18-20 mm thick makrana white marble work (table rubbed and polished) as in steps, jambs, cills, pillars, cooking platform and like in set cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with the shade of marble work incl rounding of exposed edges of marble complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed..

M&L for Brick work with sub class ‘B’ brick, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:4) on brick work or concrete surfaces finished even and fair without using extra cement complete all specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over priming complete all as specified and as directed.

Dismantling wroght iron or mild steel work of any description not otherwise provide for

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) complete all as specified and as directed.

Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railings and similar work conforming to Fe-290, Gde-E-165, complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and as directed.

M & L for Reinforced cement concrete M-25 using 20mm graded aggregates in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use & waste for form work to soffits of suspended slab such as roof slab, floor slab, landings and similar work, not exc 200 mm thick horizontal or sloping, finished fair and even complete all as specified and as directed.

M&L Precast cement concrete Type B-1, 1:2:4 using 20mm set in CM 1:6 graded stone aggregate as in cover slab for drain, lintels, beams, in floors, roofs, landing, balconies, canopies, and shelves and the like complete all as specified and as directed, Including necessary form work .

S&F Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Dismantling fencing any type complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm as in soft soil complete all as specified.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Mild steel angle iron fencing posts and struts in fencing including necessary cutting, drilling, welding etc and bending to swan neck shape as required and drilling holes notching for wire etc conforming to Fe-410-0 or 310-0 complete all as specified and as directed.

S&F Galvanised 2 strand steel barbed wire 2.24 mm dia with 2 mm barbs at 75 mm spacing and straining and fixing to posts of any type including securing or tying at crossing with and provision of GI wire staples or steel pins etc complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire all as specified and as directed.

M&L for preparation of new steel surface and applying two coat of aluminium/silver paint all as specified and as directed.

Prepration of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces) and applying one coat of cement base paint complete all as specified.

Prepration of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M & L for concertina coil on chain link fencing/boundary wall, binding and securing with necessary screws/wire etc complete all as specified and as directed.

M&L for Providing PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in coping, benching, slightly rounded or chamfred angle and throating etc all as directed.

Demolition and breaking up drain pipes of 150mm internal dia of bore SGSW, AC or reinforced concrete pipe set in cement mortar complete all as specified.

M&L Reinforced concrete pipes 150 mm bore of pipe, class NP2, laid, jointed and tested with collars complete all as specified and as directed.

M&L for concrete bed to 150mm dia drain pipes including packing under and haunching against the sides of pipes after laid and tested in cement concrete 1:3:6 type C2 for pipes all as specified and as directed.

M&L for Precast cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate louvres and jallies, 45 mm thick (measured solid) incl all moulds set in CM 1:4 complete all as directed

KABEER CONSTRUCTIONS (BID ID -3456374)

S S CONSTRUCTION (BID ID -3442591)

M/s GURFATEH BUILDERS (BID ID -3447780)

NATIONAL BUILDERS (BID ID -3448003)

Sanjiv Kumar (BID ID -3455924)

AXIS SALES (BID ID -3454602)

KMTR MONCHER COLLECTION PRIVATE LIMITED (BID ID -3455891)

JAGDISH KUMAR SEHGAL (BID ID -3457109)

G S TRADERS (BID ID -3448476)

M/S Kuldip Construction Co. (BID ID -3448004)