SPL REPAIRS FOR REPLACEMENT OF EXISTNG NON LED STREET LIGHTS WITH LED LIGHTS AND ALLIED WORKS AND PROVN OF SWITCHING SYSTEM FOR STREET LIGHTS OF MATHURA UNDER GE (EAST), MATHURA

Amount

Dismantling of old unserviceable street light fitting any type any make from any location, incl building/pole complete.

S&F in renewal LED street light fitting 72Watt IP-66 energy saving with PDC aluminium body & secondary optical lens for superior light distribution. Make-Polycab at No. PUB0506011 or equivalent in other approved make complete.

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 10 sqmm 4 core.

S&F in renewal of street light bracket made of GI pipe medium grade bend in shape of 50mm dia, 1.2m long and clamped with 2pairs of 30x5 mm flat iron clamps, nuts, bolt, washers & painted with 2 coats of alumimium paint over a red oxide primer on clamps complete all as specified and directed.

Excavating in trenches n. exc 1.5m wide & not exc 1.5mm depth for laying of cable and getting out in soft/loose soil complete.

Returning, filling with approved earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cms thick complete all as directed.

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete all as directed.

M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling puning of sand.

Supplying and laying unreinforced precast concrete cable cover class LV type 1 with flat size 250 mm x 150 mm x 40 mm complete all as directed.

S&F steel tubes light grade galvanised with all fittings fixed to walls/ floors/ poles/ road crossing etc of following sizes complete:-

50 mm bore

40 mm bore

Supply and Fix aluminium conductor cable of 2.5sqmm size weather proof flat twin core complete.

Supply and Fix thermoplastic polystyrene/polycarbonate enclosure busbar chamber three phase four wire of 100Amp rating of size 202mmx238mmx111mm complete with shock proof, vermin proof and dustproof halogen and with shock proof, vermin proof and dist proof halogen and silicon free UV resistance with internally embeddeed gasket high grade gasket made or polyurethane complete with required terminals (1 row, 6module) wit one No. MCB SP 16Amp including non metalic clamps and GI nut bolts and washers of suitable size and fixed on pole/wall complete all as specified and directed.

M&L for Cable route indicator showing "LT Cable" and route/joint of cable with arrow made of PCC M-15 grade (Nominal Mix) using 20mm graded stone aggregate duly rendered with plaster 10mm thick of size 40x50x20cm, fixed and erected on PCC platform of size 40x40x10cm grouted in ground, duly painted on both side with LT cable route complete all as directed.

Supplying, laying or fixing or passing through pipe, testing and commissioning XLPE insulated, steel tape / wire armoured heavy duty electric underground cable, 1100 volts grade with stranded aluminium conductor of nominal cross sectional area 16 Sqmm, 4 core.

Supply and Fix sheet moulding compound junction box shock and rust proof, termite resistant, temper proof three phase, four wire rating of size 250mmx200mmx105mm complete with one no MCB SP 6 Amp including non metalic clamps and GI nuts bolts and washers or soutable size and fixed on pole wall complete. Make:- Sintex Cat Part No. GSJB 2520 or equivalent Hense/ABB.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor, flat served with inner sheathing of PVC tape and overall PVC sheathed in service connections for providing electrical connections to existing security/street light of size 4Sqmm twin core complete all as directed.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI earth strip of size 32x6mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

Ms Kamal Kant Agarwal

RAJ CONSTRUCTIONS

Guru Ji Aura

M/S SWASTIKA ENTERPRISES MEERUT