Routine Maintenance to Staff Quarters under the jurisdiction of CSD-Kali Bari Type-I,II,III,IV and V quarters at Kali Bari, Peshwa Road, Telegraph Square and Dev Nagar etc. New Delhi SH- Day to day civil maintenance for three months for F.Y 2024-25

Subhead-I: Day-to-day operation of civil service centre

Providing carpentry/wood work repair services for attending day to day complaints of various residential and non residential buildings. The work shall mainly include repairs to doors,windows,ventilators, frames, shutters replacement of glass panes and other miscellaneous works related to carpentry work.The nature of works allotted shall be such that can be handleed by one carpenter (Ist class). T & P shall be arranged by the contractor. Materials consumed in the work shall be provided by BSNL free of cost.

Providing plumbing repair services for attending day to day complaints of various residential and non residential buildings. The work shall mainly include repairs to broken G.I.pipe,repairs/replacement of stop cock, bib cock, pillar cock,ball cock and other miscellaneous works related to plumbing work. The nature of work allotted shall be such that can be handled by one plumber/ fitter (1st class). T&P shall be arranged by the contractor. Materials consumed in the work shall be provided by BSNL free of cost.

Providing masonry repair services for attending day to day complaints of various residential and non residential buildings. The work shall mainly include repair to plaster work and other other miscellaneous masonry works related to plumbing work. The nature of work allotted shall be such that can be handled by one mason (1st class). T&P shall be arranged by the contractor. Materials consumed in the work shall be provided by BSNL free of cost.

Extra for making arrangements of a helper/beldar in addition to skilled workers for assisting in plumbing/masonry/carpenry/sewer maintenance works. This items shall be paid for on a perday basis, in case the complaints to be attended in items 2,3,4 & 5 are such that it cannot be attended to by single skilled worker. the decision of the Engineer-in-Charge regarding whether an extra helper is required for maintenance on a particular day will final and binding on the contractor.

Providing sewer maintenance services for attending day to day complaints of various residential and non residential buildings. The work shall mainly include cleaning and opening of chocked main hole, W.C.pots,surface drains, sewer line and other such miscellaneous works. The nature of work allotted shall be such that can be handled by one sewerman (1st class). T&P shall be arranged by the contractor. Materials consumed in the work shall be provided by BSNL free of cost.

Providing welding services (one welder with an assistant), along with all T&P such as welding machine, generator, welding rods etc. for eight hours. As and when sufficient welding works for one day have accumulated, the contractor shall be directed to provide this service. The material if any required (other than T&P and welding rods) shall be provided by BSNL. The contractor shall have to make his own arrangements for movement of T&P among the various buildings or in the same building/ compound.

Providing assitance at Enquiry office for attending day to day complaints of various residential and non residential buildings. The work shall mainly attending telephone call s , reciving requisition attending of allotty s and helping of keeping of records work and other other miscellaneous works related to manage of enquiry labour . The nature of work allotted shall be such that can be handled by skilled (knowlage full) persion and he have good manner.

Subhead-II: Material to be supplied to BSNL

Supplying the following items at civil service centre (civil enquiry).

Portland Cement (OPC-43 Grade) in 50 Kg bags

Coarse sand (Zone III) - sample to be got approved first by Engineer-in-charge

White Cement (one kg pack)

Fine sand (zone IV)

Mild steel nails of various sizes

Bright finished or black enameled mild steel screws 40mm

Bright finished or black enameled mild steel screws 30mm

Bright finished or black enameled mild steel screws 25mm

Bright finished or black enameled mild steel screws 20mm

Putty for wood work (In 10Kg packs unless otherwise directed by Engineer-in-charge)

Mirror of superior make glass 60x45 cm (Beveled edge with holes)

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Glass sheet (Pin headed) 4 mm thick

15mm nominal bore and 45 cm length PVC connection pipe with PTMT nuts.(Prayag make)

PTMT - Waste Coupling 31/32 mm (Prayag make or equivalent)

PTMT - Waste Coupling 38/40 mm (Prayag make or equivalent)

PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT - Towel Rail (600 mm long) - Prayag make

Vitreous china orrisa type W.C. pan of size 580 mm (hind ware, pary ware and equalent)

Vitreous china pedestal type water closet (hind ware,pary ware and equalent)

Vitreous china flat back wash basin 550x400 mm (Cera)

Ply wood 5 ply with commercial ply on both faces 6 mm thick

18 mm thick block board with commercial ply veneering on both side

Aluminium hanging floor door stopper with twin rubber & stopper

Anodised Aluminium pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete

Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire

Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS :12817 marked

Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS :12817 marked

Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia

Oxidised M.S.casement stay (straight peg type) 300 mm not less than 0.20 kg

Aluminium Sheet (0.8 mm thick)

Fire clay kitchen sink: 600x450x250 mm

Stainless steel kitchen sink - with drain board 510x1040 mm bowl depth 250 mm

C.P. Brass angle valve 15 mm

Stainless steel (SS 304 grade) adjustable friction window stay 255 x 19 mm

Brass cupboard lock 6 levers (best make of approved quality) 50 mm size

Anodised Aluminium sliding door bolt 250x16 mm

Anodised Aluminium tower bolt (barrel type) 200x10 mm

Anodised Aluminium tower bolt (barrel type) 150x10 mm

Hack-saw blade(Double teethed)

G.I. Hex nipple 15mm (Unik make)

G.I. 50 mm long nipple, 15mm nominal bore (Unik make)

G.I. 75 mm long nipple, 15mm nominal bore (Unik make)

G.I. 100 mm long nipple, 15mm nominal bore. (Unik make)

G.I. Socket 15mm nominal bore (Unik make)

G.I. Elbow - 15 mm nominal bore (Unik make)

GI Tee 15mm nominal bore (Unik Make)

G.I. Union 15 mm nominal bore (Unik make)

G.I. Reducer Socket 15mm to 20 mm nominal bore (Unik make)

Aluminium powder coated/ colour anodised curtain rod of 28mm diameter pipe, in required colour and shade as approved by Engineer-in-charge

M.S. powder coated bracket for 28mm dia curtain rod. (Flyrail make or equivalent)

Golden chrome plated PVC finials for 28mm dia curtain rod. (Flyrail make or equivalent)

PVC adapter for connecting flexible waste pipe to waste coupling.(a) 32mm

Unplasticised PVC waste pipe ( plain/ribbed)-28 mm nominal bore

Epoxy putty (M-seal regular or equivalent), 60 grams packets

Soot gola balls(thread) for plumbing work.

Brass spindle (face), heavy type, for 15mm nominal bore taps (full turn Concelled face)

Brass heavy duty spindle for 15mm nominal bore bibcock,pillarcock etc (as approved by Engineer-in-Charge) quarter turn 5No

Brass spindle (face), heavy type, for 15mm nominal bore taps (full turn)

left /right m.s. handle along with nut and bolts complete set

pvc cistern ball cock

Low level flushing Cistern P.V.C. 10 litre capacity (White) (with fittings, accessories and flush pipe) Prayag Iris single Flush Cistern Cat No. 706 or equlaint

C.P.Brass Bib cock with wall flange (Model Jaquar/,Prayag waves NEPTURE SERIES Cat No. -PIS-06 )

C.P.Brass pillar cock (Model Jaquar/,Prayag make Faucets series cat no.PIS-02H)

C.P.Brass Two Way Bib cock with wall flange (Model Jaquar/,Prayag waves NEPTURE SERIES Cat No-PIS-12 H )

C.P.Brass Two Way Angle cock with wall flange (Model Jaquar/,Prayag waves NEPTURE SERIES Cat No. -PIS-50)

C.P.Brass Center Hall B asin Mixer W/O (Model Jaquar/,Prayag waves NEPTURE SERIES Cat No. -PIS-11 H )

PTMT bib cock 15 mm, (Prayag's standard series new body without flange Cat No. 121-E or equivalent) in required colour and of approved quality and make.

PTMT Stop cock 15 mm, (Prayag's standard series new body without flange Cat No. 1421- or equivalent) in required colour and of approved quality and make.

ABS Over Head Shower (Crome plated series) Round 100 mm Round with 225 mm round SS Arm Make prayag or equivalent catNo.GBOS-605

Health faucet(2-in-one) (1.50 mtr tube ) with hook Cat no.188 (PTMT)

Health faucet (with pvc tube & hook ) Cat no.1871 (1.00 Mtr)

20 mm cpvc elbo 90 degree (plane)

cpvc Reducer elbo 25mm to 20mm

20mm cpvc tee ( plane)

20 mm cpvc male adapter (brass threads)(20mm to 15mm)

20mm cpvc female adapter (Brass threads) ( 20mm to 15mm)

20mm cpvc end cap

50mm C.P. Brass waste coupling heavy full thread make pryag cat no.GBEW-116

S.S.Grating Doom 125mm (5 inch)with/without hole Cat No.FT-08

50.00mm dia Steel Sink Jali (Pryag CatNo.SA-03

PTMT Jet spray with tube 1.00 mtr Cat No.521

PTMT Jet spray with tube 1.50 mtr Cat No.522

CPVC Tank Nipple 20 mm PRYAG Make Item code C272

CPVC Ball Valve 20 mm PRYAG Make Item code C22

CPVC Ball Valve 25 mm PRYAG Make Item code C23

CPVC UNION 20MM PRYAG Make Item code C32

PTMT Tank Nippal 15mm ,PRYAG Make Item code C

syphan set for single syphan cistern

cistern handle for single syphan cistern

PTMT/Aluminium glass self 600x120mm

M.S. chapka kunda (150X40mm )

Subhead-III Credit towards materials received from dismantling during day-to-day maintenance

Credit towards cost of unserviceable dismantled material:

Brass scrap (including C.P.Brass taps, ball cock rods, brass waste etc.)

Iron / steel scrap (including cast iron, galvanised iron, mild steel etc.)

PVC / Plastic scrap (such as PTMT, PVC pipe pieces, old cistern etc.)

Alluminium scrap p (such as old sheet,old curtain rod etc.)

Pawan Kumar Gupta (BID ID -810696)