Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.6 L
EMD Value
₹9,608
Closing Date
12 Aug 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Avionics Division, Hyderabad
Avionics Division, Hyderabad
Civil works for improvement of facilities for Navigation and communication building of SU-30 project
8729
HAL/HD/CE/T/24-25/14
Works
Accessories Complex- Avionics Divn-Hyderabad-Plant Maintenance
₹1,180
₹9,608
12 Aug 2024
22 Jul 2024
22 Jul 2024
12 Aug 2024
Removing old Aluminum/wooden partitions including doors by carefully removing glass,Powder coated Aluminum members of different sections and boards of any description at any height / position and handing over the useful materials to stores including cost of all tools, labour all as directed by EIC
Providing and constructing brick work with best locally available frogged fly ash bricks in CM 1:4 for superstructure for walls and partitions etc., for half brick thickness (115mm thick) including raking out joints 10mm deep to receive plaster including placing 2 Nos 8mm dia TMT rods horizontally at every 4th course, (Reinforcement will be seperatelly measured and paid) scafolding, curing cost of all materials,labour etc., complete, at all heights and depths complete as sepecified and directed by EIC.
Plastering external brickwalls / concrete surfaces with C.M 1:6, 20 mm thick trowelled to even and smooth finish including cost of all materials, labour, curing, scaffolding,etc. at heights mentioned below including material,scafolding etc as directed by EIC.
Providing and erecting partly glazed and partly panelled powder coated Aluminium partition using standard sections of JINDAL or HINDALCO so that each pannel shall not exceed 1.20 SQM with 12mm thick pre-laminated board having twin finish of Novopan / TESA in bottom rows and 5mm thick float glass of MODI / ST GOBAIN on middle and top rows including glazing clips, rubber gasket for fixing the glass, filling gaps with silicon sealant,strengthening the partition by taking the required intermediate vertical members up to roof lvel, etc. Specification for aluminum sections to be used is a) Bottom members -95.25 x 44.45x 2.0mm b) Top / vertical members - 63.50 x 38.10 x1.95mm c)Middle memebers - 63.50 x 38.10 x 1.95mm.
Providing, manufacturing and erecting Partly glazed and partly panneled single / Double leaf Aluminium door using standard anodized powder coated sections of JINDAL, HINDALCO make as detailed below all of approved make.(Including necessary screws,fasteners,cleats,rods etc.Specification for each shutter :-a) Bottom members -95.25 x 44.45x 2.00mm b) Top members - 47.62x44.45x1.95mm c) Side member - 47.62 x 44.45 x 1.82mm d) Middle member - 49.91 x 44.45 x 1.88mm; Door member of SL NO19566 of JINDAL e) 12mm thick pre laminated twin finish exterior grade of Novapan MFPB (PTX) - Superior grade or TESA / ASIS / ARCHIDPLY or any other particle board having ISI Mark or 12mm thick both side finished MDF boards f) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN make g) Rubber gaskets - Good quality of approved make h) Glazing clips - Weight of 0.097Kg/RM. I) Aluminium hinges 125mm long - 3Nos j) Aluminium handle 150mm long - 2 Nos. k) Concealed lock of make godrej/sheel 4 lever l) Aluminium tower bolts 200mm long - 2 Nos. m)Miscellaneous -Al. cleats, screws ,Door sealant, etc
Providing and fixing in position (at any ht.& level) two track glazed, Aluminium powder coated sliding windows with sections conforming to JINDAL catalogue including providing & fixing 4.80mm thick plain float glass of MODI / SAINT GOBAIN make with approved quality rubber / nylon gaskets, providing and fixing standard Aluminium 75mm handles, locking arrangement, necessary wheel / rollers etc.,. The windows shall be fabricated with Aluminium extrusions as described below of series B: a) Bottom member two track section 61.85 x 31.75 x 1.20 mm. b) Top & sides of two track section 61.85 x 31.75 x 1.30mm. c) Shutter top & bottom 40 x 18 x 1.29mm d) Shutter interlock 40x27x 1.29mm e) Shutter handle side 40 x 18 x 1.29mm complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC. [Gaps between wall / beam and Al. member shall be filled with slicon and made good].
Supplying and sticking UV protected sun control / frosted film having 25 micron thickness over glass panes of windows,partitions and doors including material,labour,wastage etc as directed by EIC.
Providing and fixing Aluminum body hydraulic Door Closer of designation No. 3 of Everite / Hardwin/ Universal make conforming to IS 3564 to the doors with necessary screws etc. complete as specified and directed by EIC.
Earth work excavation for foundation of retaining walls,columns,SWG lines, inspection chambers,etc.,not exceeding 1.50 m depth in hard dense soil, other than rock including dewatering if required, getting out and stacking the earth including cost of tools, labour, transportation etc,all as directed and specified by EIC.
Dismantling the existing brick masonry made in Cement mortar of any thickness from all height and sorting / stacking and then handing over the useful material to stores within a lead of 200m (approx.) all as specified and directed by EIC.The rate shall include for cost of tools, labour charges,taxes,etc ( Disposing of debris will be measured and paid seperately as per the volume)
Providing and laying Plain cement concrete 1:2:4 by volumetric mix using 20mm and downgraded hard granite stone aggregate for isolated foundation etc including mechanical vibration, watering, curing etc. complete as approved, specified and directed by EIC.
Supplying, fabricating by welding and erecting M.S rolled structural members like channels , angles M.S pipes, MS square pipes, chequered plate,base plates etc in position as per the drawing by mechanical means of TATA, SAIL, RINL make conforming to IS specification including applying two coats of synthetic enamel paint over a coat of red oxide priemer lifting,hoisting,fixing in position by welding at site,bolting and providing all as specified and directed by EIC.The relevant code of procedure for rolled steel section dimensions, welding ,erection and hoisting and tolerances allowed shall be complied.
Suppling and Fixing Pre-Painted galvatume Aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa for gutters , fixed with self tapping screws as bend to required shape of tarpezoidal/ rectangular section including joints lapped minimum 40mm wide and gaps seal with silicone sealant, ends fixed in CM wherever necessary at all heights including making cut outs for fixing rain water pipes, cost of all material, labour tools, overlapping,scaffolding, wastages, including necessary safety measures, incidental charges complete in all respects and as directed and approved by EIC.
Surface preparation on existing surfaces of walls including cornices,pilasters etc., by using buffing machine,sand papering,dusting, brooming,etc and applying one coat of primer and 2 coats of ace exterior paint of "Asian paints" make including plugging out wooden gutles,nails etc from walls present if any,filling cracks with BIRLA WALL PUTTY,etc including cost of all material, labour, wastages,scafolding etc at all heights as approved and directed by EIC.
Disposing the all types of debris, dismantled material, excess earth , heaps ,etc.from factor area to outside to a lead of 1000m approx. including vehicle,labour,fuel charges,driver etc complete all as specified and as directed by EIC.
HAL/HD/CE/T/24-25/14
HAL/HD/CE/T/24-25/14
Civil works for improvement of facilities for Navigation and communication building of SU-30 project
Description
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
GST NO.:
PAN No.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.
TURN OVER IN Rupees
Pls Enter Turn over in Rs. for all the 3 years
ESI & PF Nos with proof (If any)
Related Document to be Uploaded to e-Procurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
80% (One Work)
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
Pls Accept The Delarication
DECLARATION II
Pls Accept the Delaration II
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TBNITCE14.pdf
TENDER_DOCUMENT • 1.47 MB
NITCE14.pdf
TENDER_DOCUMENT • 0.32 MB
ChecklistofDocuments.pdf
TENDER_DOCUMENT • 0.02 MB
AnnexureL.pdf
TENDER_DOCUMENT • 0.01 MB
PROCESSDOCUMENTFORSBICOLLECT.pdf
TENDER_DOCUMENT • 1.18 MB
coveringletterforSBIcollect.pdf
TENDER_DOCUMENT • 0.01 MB
ProformaB.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureIIC.pdf
TENDER_DOCUMENT • 0.01 MB
EFTmandateform.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureI.pdf
TENDER_DOCUMENT • 0.01 MB
ProformaA.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureIIB.pdf
TENDER_DOCUMENT • 0.01 MB
PriceBidCE14.xlsm
TENDER_DOCUMENT • 0.07 MB
PQCE14.xlsm
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .