SPECIAL REPAIRS TO COMPOUND WALL OF CNA (OF) BUILDING (P - 30M) AT JABALPUR UNDER GE (I) (P) FYS JABALPUR

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar or cement tlime, mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concret articles all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position all as specified and as directed.

Demolition of cement concrete (unrainforced) of any description and in any poisition not otherwise specifically provided for specification all as directed.

Boring holes for under reamed pipes 4.2m deep in soil for under reamed piles 300mm dia with two reaming and getting out and disposal of spoil to distance of not exceeding 50m all as specified and directed.

PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as directed.

M&L for reinforced cement concrete Design mix M-25 (20mm graded agg) as in foundation footing, foundation beam, plinth beams , under reamed piles etc complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 (20mm graded agg) as in beams, cantilever, bressummeres lintels over 1.50m spam complete all as specified and directed.

M&L for reincorced cement concrete Design Mix-25 (using 20mm graded agg) as in columns, pillars, piers, post and struts etc complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footing,s side and soffits of foundation and plinth beams and simillar work including rough finished surfaces complete all as specified and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions including fair finished surfaces complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, beam haungings, girders, bressum mers, lintles, cantilvers, shelves including supports, overhangs, etc also splays between floors and beams etc including fair finished surfaces all as specified and as directed.

M&L TMT mild steel bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealled) not less than 0.9mm dia or securing with clips.

Mild steel TMT bars 6 to 10mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, (as in stirrups) hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips all as specified & directed.

M&L for Brick work with sub class B bricks straight or curved or plan exc 6m mean radius in CM 1:6 using old sub class 'B' bricks complete all as specified and directed.

M&L for rendering 15mm thick cment plastering on fair faces of brickwork in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick cement plaster on other than fair faces of brick work in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered surface of wall and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) Fe - 290 E - 165 quality complete all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) incl Dismantling old barbed wire of any description including taking out hooks etc complete all as specified and directed.

M&L for preparing new surfaces of steel and iron work and applying two coats of synthetic enamel paint over a coat of red oxide area not exc 10cm in with or girth all as pecified and directed.

M/S RAJ BUILDERS