REPAIR AND MAINTENANCE OF MISC FURNITURE ARTICLES OF OTM ACCN UNDER GE (NORTH) MEERUT

Amount

BED PLY TOP (Drg No FD-246 & 247) Removing of old unserviseable plywood top from Bed ply top and S&F new top of same size of 12mm thick ply wood (ISI marked), BWP (IS:710) grade of appropriate size with screws complete all as shown on drawing and as directed.

Removal of old unserviceable long rail from bed and S&F new long rail with rounded edges of size 1980 mm x 90mm x 35 mm of hard wood teak and fixing the same as shown on drawing including one coat of french polish after preparing the surface by sand paper complete all as specified and as directed by Engr-In-Charge/GE.

All as per srl item No. 1.01 here-in-before but short rail of size 60mm x 60mm of suitable length.

All as per srl item No. 1.01 here-in-before but stiffener of size 60mm x 60mm of suitable length.

Removing of old unserviceable ply wood from the existing head rest of Bed ply top and S & F new OSTF plywood 04mm thick ISI marked, BWP (IS:710) grade to both sides of head rest including 04mm thick teak wood beading all around as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete.

All as per srl item No 1.04 here-in-before but foot rest.

Removing of old unserviceable head rest from bed ply top and S&F new head rest made out of Ist class hard wood including provision of 04 mm thick one side teak faced plywood and teak wood beading 04 mm thick as per shape and size shown in drawing and fixed with nails duly french polished with both side MNF arrangement and fixing the same.

BIN LINEN MULTIPURPOSE (Drg No FD/E6/MAP/09) Removing of old unserviceable top from bin linen multipurpose and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood with both side lamination with colour / shade as approved by Engr-in-Charge / GE.

Removing of old and unserviceable door shutters of bin linen multipurpose S&F of new door shutters made of 18 mm thick BWP (IS:710) plywood with both side lamination as shown on drawing and as directed.

Removing of old unserviceable hingses and S&F of new hinges to bin linen multipurpose as per size and design shown on drg complete all as specified and directed.

Removing of old broken handles and S&F of new chromium plated steel handles to bin linen multipurpose as per sample kept at BSO (Office) & as shown on drg and as directed.

Removing of old magnetic catcher and S&F of new magnetic catcher (EBCO/Godrej/Hettich) to bin linen multipurpose as per size and design shown on drg complete all as specified and directed by Engr-in-charge/GE.

CHAIR DINING (Drg No FD--203/228/279/1105) M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge/GE.

All as per srl No 3 here-in-before but front leg

All as per srl No 3 here-in-before but side rail

All as per srl No 3 here-in-before front/ back rail

All as per srl No 3 here-in-before but stiffner

All as per srl No 3 here-in-before but back strip

S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge/GE.

CHAIR DINING ORs (MAP) (FD/MAP-II/04) M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge/GE.

All as per srl No 4.00 above but front leg

All as per srl No 4.00 above but side rail

All as per srl No 4.00 above front/ back rail

All as per srl No 4.00 above but stiffner

All as per srl No 4.00 above but back strip

S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

Removing of old unsv/ troneout PVC seats from chairs and providing holes all round on top of rails in equal distance for caning as per Drg No FD-279.

CHAIR EASY (Drg No 229) M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge/GE.

All as per srl No 5.00 above but front leg

All as per srl No 5.00 above but side rail of seat frame

All as per srl No 5.00 above but front or back rail of seat frame

All as per srl No 5.00 above but side rail of back frame

All as per srl No 5.00 above but top or bottom rail of back frame

All as per srl No 5.00 above but replacement of arm rest

S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

Recanning of wooden chair of different sizes with 2mm wide cane having 3mm wide plastic cane border in Godrej pattern all as shown on drawing. (Eg :- Chair Dining,Chair writing,Chair Easy CB etc.)

HAT STAND WITH MIRROR (Drg No FD-233) Removing old broken/unserviceable teak plywood from front frame of hat stand and S&F new 04mm thick OSTF BWP (IS:710) plywood as per shape and size shown in drawing including melamine polishing to match the other parts complete all as specified and directed by Engr-in-charge/GE.

Removing of old unserviceable aluminium/ brass pegs from hat stand and S&F new brass pegs of size 120x75mm (overall) to hat stand complete all as per drawing, as specified and as directed by Engr-in-charge/GE.

PEG TABLE (Drg No FD-277) Removing old unserviceable top from peg table and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed with 0.8mm thick laminates colour / shade as approved by GE. 2mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed by Engr-in-charge/GE.

Removing of old unserviceable leg from existing peg table and S&F the same size new leg made out of Ist class hard wood teak to Peg table duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No 8.01 here-in-before but long top rail.

All as per srl item No 8.01 here-in-before but short/ bottom rail.

All as per srl item No 8.01) here-in-before but stiffener of Peg table.

SOFA SET 05 SEATER WITH CUSHION (Drg No FD-281 / FD/MAP-II/02) S&F foam cushion of size 22" x 21" of thickness 100mm and 40 density complete all as per drawing, as specified and as directed by Engr-in-Charge/GE.

Removal of tapestry cloth cover from existing foam cushion of seat/ back of Sofa set 05 seater and providing new cover of foam cushion of approved shade of rate not less than Rs. 450/- per meter duly stitched and fixing the same all as directed. The cover shall be removable duly provided with ZIP in such a way that ZIP is not visible (overlapped with cover fabric) as directed by Engr-in-charge (sample of tapestry cloth shall be approved by the GE).

TABLE DINING 6 PERSONS (Drg No FD/E6/MAP/03 ) Removing of old unserviceable top from table and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed with 0.8mm thick laminates of colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and/ or directed by Engr-in-Charge/GE.

All as per srl item No 10.00 here-in-before but long rail for Table Dinging 6 Person made out of Ist class hard wood teak.

All as per srl item No 10.00 here-in-before but short rail made out of Ist class hard wood teak.

S& F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws.

TABLE 3’ x 3’ (900 x 900 x 760 mm) (Drg No FD-291) or similar Removing of old unserviceable top from Table and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all , as specified and/ or directed by Engr-in-Charge/GE.

All as per srl item No 11.00 here-in-before but leg made out of 1st class hard wood.

All as per srl item No 11.00 here-in-before but rails made out of Ist class hard wood teak.

S&F bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws.

TEAPOY (Drg No FD-34/ 232/ 278/ 382) Removing of old unserviceable top from Table and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all, as specified and/ or directed by Engr-in-Charge/GE.

All as per srl item No12.00 here-in-before but leg made of 1st class hard wood.

All as per srl item No 12.00 here-in-before but long rail made out of Ist class hard wood teak.

All as per srl item No 12.00 here-in-before but short rail made out of Ist class hard wood teak.

All as per srl item No 12.00 here-in-before but stiffner made out of Ist class hard wood teak.

S&F hard PVC shoe/ ring with suitable screws for fixing.

TABLE 900 x 600 mm with / without drawer (Drg No) FD-223/ 224/ 283/ 284) Removing of old unserviceable top from Table and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all , as specified and/ or directed by Engr-in-Charge/GE.

All as per srl No 13.00 above but leg made out of 1st class hard wood

All as per srl No 13.00 above but replacement of long rail made out of Ist class hard wood teak.

All as per srl No 13.00 above but replacement of short rail made out of Ist class hard wood teak.

All as per srl No 13.00 above but replacement of drawer with fittings

All as per srl No 13.00 above but replacement of bottom centre stiffener

All as per srl No 13.00 above but replacement of bottom side stiffner.

S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge/GE.

TABLE DRESSING LADIES WITH MIRROR (Drg No FD-251/ FD/MAP-II/07) or similar Removing of old unserviceable looking mirror from table dressing ladies and fixing new looking mirror of size 1200 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and polishing complete in all respect to fix on wall all as shown on drawing, as specified and as directed by Engr-in-Chief/GE.

Removing old broken/unserviceable knob from table dressing ladies and S&F new 40 mm size CP brass knob as per shape and size shown in drawing and as directed.

Removing old broken/unserviceable sliding glass from table dressing ladies and S&F new 05mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.

Removing old broken/unserviceable legs from table dressing ladies and S&F new legs of Ist class hard wood teak as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

Removing old broken/unserviceable laminates from the top of table dressing ladies and S&F new 1.5 mm thick laminates of best quality fixed with fevicoal as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/unserviceable laminates from the drawer of table dressing ladies and S&F new 1.5 mm thick laminates of best quality fixed with fevicoal as per shape and size shown in drawing complete all as specified and directed.

TABLE CENTRE (Drg No FD No -274) Removing of old unserviceable top from Table Centre and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed with 0.8mm thick laminates of colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed by Engr-in-Charge/GE.

Replacement of old unserviceable leg from existing table centre and S&F the same size new leg made out of Ist class hard wood teak to table centre duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No 15.01 above but long rail.

All as per srl item No 15.01 above but short rail.

All as per srl item No 15.01 above but stiffener of table centre.

Chair Dining Offrs (MAP) (Drg No FD/E6/MAP/04) M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge/GE.

All as per srl No 16.00 above but front leg

All as per srl No 16.00 above but side rail

All as per srl No 16.00 above front/ back rail

All as per srl No 16.00 above but stiffner

All as per srl No 16.00 above but back strip

M&L for removal of unsv seat of chair, S & F of new foam cushion 50mm thick 40 density for seat and duly covered with superior quality cloth, fixed with removable 12mm BWP (IS:710) grade ply wood as specified in drg and as directed and approved by Engr in charge/GE.

TABLE WRITING (Drg No FD-33, FD-275) Removing of old unserviceable top from Table Writing and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed with 0.8mm thick laminates of colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed by Engr-in-Charge/GE.

Replacement of Legs of to be made out of Ist class Teak wood well seasoned and fixed as per drg.

Replacement of Stiffener, to be made out of Ist class Teak wood well seasoned

Replacement of Door Shutters to be made out of 18 mm thick plywood (BWP, IS:710) laminted both sides duly fixed with 2mm PVC edge-binding allround and CP Brass knobs and piano type hinges 4 mm thick with 4 lever 40 mm brass lock.

Replacement of back of table writing which shall be made out of 06 mm thick commercial ply wood ISI marked

Replacement of Drawers of table writing to be made out of 18mm Plywood (BWP, IS:710) duly laminated both sides and 2 mm thick edge-binding to be fixed and provided one knob.

Replacement of Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked.

BED HARD STEEL :- (Drg No FD - E6/MAP/08(R) Removing of old and unserviceable Plytop from Bed Hard and S&F of new 12mm thick plytop of suitable size, BWP IS:710 of approved quality with 10 Nos stainless steel half round nnuts & bolts all as shown on drawing and as directed.

Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18 mm thick Plywood BWP Grade both laminated with colour/ shade approved by GE/ Engr-in-Chrge. All as per size and design shown on drawing and as directed.

All as per Sr.item No. 18.01 above but foot board of Bed hard.

S&F in replacement hard rubber shoes at each corner of long rail of Bed hard steel all as shown on drg.

S&F in replacement hard rubber shoes at the top of leg of of Bed hard steel all as shown on drg.

S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel all as shown on drg.

Welding to broken joints of bed hard all as directed .

CHAIR VERANDAH :- (Drg No FD - 359 & 256) Cutting and removing of old cane from Chair verandah and preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04 mm wide of approved quality in Godrej Pattern complete all as per drawing, as specified and as directed by Engr-in-Chief/GE.

M&L for Welding to broken joints of Chair verandah complete all as per drawing, as specified and as directed.

S&F in replacement PVC shoes to Chair Verandah complete all as per drawing, as specified and as directed.

CHAIR VERANDAH (MAP) :- (Drg No FD - MAP-II/06, MAP-II/15) Cutting and removing of old / unserviceable PVC Sheet from Chair verandah, preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04 mm wide of approved quality in Godrej Pattern complete all as per drawing, as specified and as directed by Engr-in-Chief/GE.

M&L for Welding to broken joints of Chair verandah complete all as per drawing, as specified and as directed.

S&F in replacement PVC shoes to Chair Verandah complete all as per drawing, as specified and as directed.

CHAIR COMPUTER :- (Drg No FD - E/6/MAP/01) M&L for Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed on frame with screws and covered with 40mm thick U foam over shape and tapestry cloth. Fixing shall be all as per drawing and including all minor repairs and welding etc. complete all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE) complete all as per drawing, as specified and as directed.

M&L for Removing of old/unserviceable tapestry cloth from seat and back of existing Chair Computer and S&F new tapestry cloth to seat and back of Chair Computer (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE) complete all as per drawing, as specified and as directed.

M&L for Replacement of unserviceable hydraulic system of Chair Executive for the adjustment of height complete all as per drawing, as specified and as directed.

M&L for Replacement of old, unserviceable/ broken wheel base of Chair Executive complete all as per drawing, as specified and as directed.

Removing old/unserviceable twin castor wheel from chair and S&F new twin wheel castors as per existing shape and size complete all as per drawing, as specified and as directed.

M&L for Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as per drawing, as specified and as directed.

CHAIR WRITING :- (Drg No FD - E6/MAP/12) M&L for Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed to frame with screw and covered with 40mm thick U foam over shape and tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs with welding to steel frame etc (Note :- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter and as per sample approved by GE) complete all as per drawing, as specified and as directed.

M&L for Removing of old/ unserviceable tapestry cloth from seat and back of existing Chair Writing and S&F new tapestry cloth to seat and back of Chair Writing (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE) complete all as per drawing, as specified and as directed.

M&L for Welding to broken joints of Chair writing complete all as per drawing as specified and as directed.

S&F in replacement hard PVC shoes to Chair writing. complete all as per drawing, as specified and as directed.

M&L for Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as per drawing, as specified and as directed.

TEAPOY VERANDAH :- (Drg No FD - 255) M&L for Removing of old unserviceable top from Teapoy Verandah and new top made out of 18 mm thick BWP plywood (IS:710) duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and as directed.

M&L for Replacement of unserviceable flat iron frame with FI 25 x 5 mm thick of required size as per drg. The fixing and finishing shall be done in accordance with drawing specifications complete all as per drawing, as specified and as directed.

M&L for Welding to broken joints of Teapoy verandah complete all as per drawing, as specified and as directed.

S&F in replacement PVC shoes to Teapoy verandah complete complete all as per drawing, as specified and as directed.

TEAPOY VERANDAH :- (Drg No FD - E6/MAP/17) Removing of old unserviceable top from Teapoy Verandah and S&F of new top made out of 18 mm thick BWP plywood (IS:710) duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and as directed.

M&L for Welding to broken joints of Teapoy verandah complete all as per drawing, as specified and as directed.

S&F in replacement PVC shoes to Teapoy verandah complete complete all as per drawing, as specified and as directed.

Removing of old/unserviceable jali from existing Teapoy Verandah and S&F new Jali including two coat of synthetic enamel paint (black in colour) complete all as per drawing, as specified and as directed.

TABLE BED SIDE (OFFICERS) :- (Drg No FD - E6/MAP/15(R) Replacement of upper drawer made out of 18 mm thick BWP plywood with both side lamination & 2mm PVC edge-binding as per colour/ shade approved by GE/Engr-in-Charge.

Replacement of Lower drawer made out of 18 mm thick BWP plywood witrh both lamination with colour/ shade as approved by GE/Engr-in-Charge & soft close telescopic channel of best quality as approved by Engr-in-charge.

Removing of old unserviceable top from table bed side and supply and fixing the new top made out of 18 mm thick BWP grade plywood IS:710 with both side lamination with colour / shade as approved by GE/ Engr-in-Charge.

All as per srl item No. 25.02 above but side of table bed side.

Removing of old unserviceable back ply of table bed side and supply and fixing the newback ply of same size made out of 06mm thick plywood both side laminated all as shown on drawing and as directed by Engineer-in-Charge.

Removing of old/unserviceable handle from the table bed side and supply and fixing new CP steel handle 100mm long as per sample, shape and size as directed by Engr-in-charge/GE.

LOCKER BED SIDE STEEL :- (Drg FD - 257) Replacement of old unserviceable hasp and staple with new 100mm long MS chromium plated hasp and staple all as shown drg and as directed.

M&L for Replacement of old unserviceable bow handle with new 100mm long CP steel bow handle complete all as per drawing, as specified and as directed.

M&L for Replacement of unserviceable conduit pipe with new CP steel conduit pipe of suitable size of 20mm dia having wall thickness 1.25mm to locker steel complete all as per drawing, as specified and as directed.

M&L for Replacement of unserviceable socket with new aluminium socket/brackets suitable for MS 20mm dia conduit pipes complete all as per drawing, as specified and as directed.

S&F Removing of old unserviceable foot rest from locker bed side steel and new foot rest made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points and applying one coat of synthetic enamel olive green paint with spray machine over a coat of primer after preparation of surfaces complete all as per drawing, as specified and as directed.

All as per item Sl No 26.00 above here-in -before but bottom sheet of locker bed side steel complete all as per drawing, as specified and as directed.

Removing of old unserviceable MS hinges of locker bed side steel and S&F new MS hinges 65 mm long with gas welding / reviting complete complete all as per drawing, as specified and as directed.

CHAIR REVOLVING LOW BACK (STEEL) :- (Drg No FD - TP) Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood covered with 75mm thick U foam and best quality of tapestry cloth. The back shall be 6mm thick plywood fixed on frame with screwes and covered with 40mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs and welding etc complete all as specified and as directed by Engineer-in-Charge. Note :- The tapestry cloth of rate ranging between Rs. 250/- to Rs. 275/- per meter as per sample approved by GE.

Removing of old/unserviceable tapestry cloth from seat and back of existing Chair Revolving and S&F new tapestry cloth to seat and back of Chair Revolving complete all as specified and as directed by Engineer-in-Charge. Note:- The tapestry cloth of rate shall not be less than Rs. 175/- per meter as per sample approved by GE.

Replacement of unserviceable hydrulic system of Chair revolving for the adjustment of height all as directed by the Engineer-in-Charge/GE.

Replacement of old ,unserviceable/broken wheel base of Chair revolving all as directed by the Engineer-in-Charge/GE.

Removing old/unservicavle twin castor wheel from chair and S & F new twin wheel castors as per shape and size complete all as specified and directed by Engr-in-Charge/GE.

Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base all as directed by Engr-in-Charge/GE.

CHAIR SCHOOL WITH HAND BOARD :- (Drg No FD - E6/MAP/05) Removing old/unserviceable one piece PVC seat & back from chair school with hand board and S & F new one piece PVC seat and back of best quality as per shape and size shown in drawing complete all as per drawing, as specified and as directed by Engr-in-Chief/GE.

Removing old/unserviceable hand board top from chair school with hand board and S&F new top of 18mm ply wood (BWP IS:710) of colour / shade as approved by GE/Engr-in-Charge with PVC edging and screw to 25 mm hollow steel pipe inserted in 20 mm complete all as per drawing, as specified and as directed.

M&L for Welding to broken joints of Chair school with hand board complete all as per drawing, as specified and as directed.

S&F in replacement PVC shoes to Chair school with hand board complete complete all as per drawing, as specified and as directed.

CHARPOY WITH HARD TOP :- (Drg No FD - MAP-II/01) Removing of old and unserviceable Plytop from Charpoy with hard top and S&F of new 12 mm thick BWP plywood of suitable size, ISI marked, BWR phenol bonded plywood with unpolished edging of approved quality all as directed by Engr-in-Charge/GE.

S&F in replacement hard rubber shoes at the bottom of Charpoy with hard top all as shown complete all as per drawing, as specified and as directed.

TABLE COMPUTER Removing of old unserviceable top from Table Computer and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed with 0.8mm thick laminates of colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all, as specified and/ or directed by Engr-in-Charge/GE.

Removing of old unserviceable bottom from Table computer and supply and fixing the new bottom of same size made out of 18 mm thick BWP (IS:710) plywood with both side lamination with allround PVC edging all as shown on drawing and as directed.

All as per Srl item No 30.00 here-in-before but vertical board on side of Table computer.

All as per Srl item No 30.00 here-in-before but keyboard tray of Table computer.

All as per Srl item No 30.00 here-in-before but drawer of Table computer.

All as per Srl item No 30.00 here-in-before but pull out mouse tray of Table.

Removing of old unserviceable telescopic channel of key board and supply and fixing new soft-close steel telscopic channel to Table computer as directed by Engineer-in-Charge.

All as per Srl item No 30.00 here-in-before but telescopic channel for drawer of Table computer as directed by Engineer-in-Charge.

All as per Srl item No 30.00 here-in-before but telescopic channel for pull out mouse tray of Table computer complete all as per drawing, as specified and as directed.

S&F new Nylon buffers to Table computer complete all as per drawing, as specified and as directed.

S&F new knobs to Table computer complete all as per drawing, as specified and as directed.

Polishing M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of Polyurathane polish of approved make with high glossy finish after applying putty/ filler/ sealer complete all as specified and as directed by Engr-in-Chief/GE.

Table Dining 06 Person (Drg No FD-273 / FD/E6/MAP/03)

Table Dining 08 Person (Drg No FD-273 / FD/E6/MAP/03)

Table Dining 1200 x900 (JCOs/OR) complete all as specified and as directed (Drg No FD/E6/MAP/03)

Peg Table complete all as specified and as directed (Drg No FD-277)

Table 3' x 3' (900 x 600 x 760 mm) complete all as specified and as directed (Drg No FD-291)

Table 900 x 600 mm with / without drawer complete all as specified and as directed. (Drg No FD-223/ 224/ 283/ 284)

Table Centre complete all as specified and as directed (Drg No FD-274)

Table dressing Ladies with mirror complete all as specified and as directed (Drg No FD-251/ FD/MAP-II/07)

Table Writing complete all as specified and as directed (Drg No FD - 275)

Chair Dining FD & MAP (ORs) complete all as specified and as directed (Drg No FD - 279 / FD/MAP-II/04)

Side Board complete all as specified and as directed (Drg No FD-241)

Sofa Set 05 seater with cushion complete all as specified and as directed (Drg No :FD-281)

Chair Dining Offrs (MAP) complete all as specified and as directed (Drg No FD/E6/MAP/04)

Bed Ply Top complete all as specified and as directed (Drg No FD-246 & 247)

Bin Linen Multipurpose complete all as specified and as directed (Drg No FD/E6/MAP/09)

Hat Stand with Mirror complete all as specified and as directed (Drg No FD-362)

Teapoy complete all as specified and as directed (Drg No FD-278)

Chair Dining, FD - 279 / FD/MAP-II/04 complete all as specified and as directed (Drg No FD-17(M)/ 201/ 229/ 281)

PAINTING :- M&L for removing existing paint by application of paint remover / grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint (Dual tone) in such a manner that body of Almirah/Locker shall be in one colour & door shutter shall be another colour. Make/colour/ shade as approved by GE/Engr-in-charge by spray painting after denting and filling with putty and preparation of surface thoroughly to the following steel furniture items (internally & externally complete) as specified and as directed by Engr-in-Charge/GE.

Almirah large steel (Drg No : FD-1031)

All as per Srl item No 32.00 here-in-before but Almirah large steel 1/2H,1/2S (Drg No: FD/E6/MAP/18) complete all as specified and as directed by Engr-in-Charge/GE.

All as per Srl item No 32.00 here-in-before but Almirah medium steel (Drg No :- FD-1032)

All as per Srl item No 32.00 here-in-before but Bed hard steel (MAP) (Drg No: FD/E6/ MAP/ 18(R) complete all as specified and as directed.

All as per Srl item No 32.00 here-in-before but Charpoy IP folding with hard top (Drg No : FD-388(R) complete all as specified and as directed.

All as per Srl item No 32.00 here-in-before but Charpoy IP Hard Top (MAP) (Drg No : (FD/MAP/II/01) complete all as specified and as directed.

All as per Srl item No 32.00 here-in-before but Chair Writing (MAP) (Drg No : (FD/E6/MAP/12) complete all as specified and as directed.

All as per Srl item No 32.00 here-in-before but Ladder for loft (steel) Drg No : (FD-238) complete all as specified and as directed.

All as per Srl item No 32.00 here-in-before but Rack shoe steel (Drg No: (FD/E6/MAP/02(R) complete all as specified and as directed.

All as per Srl item No 32.00 here-in-before but Teapoy Verandah (Drg No : (FD-255) complete all as specified and as directed.

All as per Srl item No 32.00 here-in-before but Teapoy Verandah (MAP) (Drg No: (FD/E6/MAP/17) complete all as specified and as directed.

All as per Srl item No 32.00 here-in-before but Chair School with Hand Board (Drg No: (FD/E6/MAP/05) complete all as specified and as directed.

All as per Srl item No 32.00 here-in-before but Table Bedside (Steel) (Drg No : (FD/E6/MAP/15(R) complete all as specified and as directed.

All as per Srl item No 32.00 here-in-before but Table Office Officer's Steel (Drg No: FD-1003) complete all as specified and as directed.

All as per Srl item No 32.00 here-in-before but Table Office Clerk Steel (Drg No : FD-1004) complete all as specified and as directed.

All as per Srl item No 32.00 here-in-before but Locker Bed Side Steel (Drg No: FD-257) complete all as specified and as directed.

VARAROHA BUILDERS (BID ID -3480240)

CHAUDHARY FURNITURE HOUSE (BID ID -3476342)

F.M. KHAN SONS (BID ID -3484576)