SPECIAL REPAIRS TO BLDG NO. 350 INDRAYANI BLOCK AT INS SHIVAJI LONAVLA

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc.

Dismantling of stone slabs and tiles of any description or thickness in floors, laid, bedded and pointed in any mortar.

Demolition of PCC in ground floors and pavings not exc 15cm thickness (below or above ground level).

Dismantling of existing water proofing treatment consisting of cement mortar, tarfelt and foreign material etc including cleaning the surface and removal of dismantled materials outside MD land.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each.

Taking down existing steel / aluminium ventilator / window of any size or any description.

PCC 1:5:10 in sunken floors filling in mass concrete type E2,using 40mm aggregate complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided

40 mm dia GI tubes of any grade to walls and ceilings or laying floors in short lengths

Preparing RCC surfaces which shall be made dry, clean, even and checked for soundness, removal of oil, dirt, laitance and other contaminants manually and surface shall be fairly smooth finish.Chamfering the floor wall junctions with cement mortar 1:4 admixed with Nitobond SBR or equivalent @1 litre per 50 Kg bag of cement. Down take Rain water pipe annular spce packing using Conbextra GP2 or equvalent mixed with water and filling as per manufacturer's specifications. Water pondingfor minimum 48 Hrs and injection grouting of construction joints, leaking spot and honey combs with cementious pressure grouting with 40 psi pump using Cebex 100 or equivalent @ 225 gms mixed to 50 Kg bag of cement including joints packing using polymer modified mortar. Providing and applying water proof coating using Fosroc Nitoproof 600 or equivalent, over dry surface and 1.5 mm thick (2 coats) with interval period of 6 Hrs over a substrata using spray/ squeegee/ roller/ brush. Water proofing coating shall have the elongation of 500 - 700% (ASTM D412-90), tear resistance of 21 KN/ m (ASTM D624-90), and the tensile strength of >1.9 N/ mm2 (ASTM D412-90). Termination to done on wall extending the coating to minimum 300 mm height above the finished floor level as per vendor recomendations. Laying 200 g non woven geo textile membrane over Nitoproof 600 coating with overlap sealed before providing screed concrete. Make: Fosroc or equivalent as approved by the GE.

Non skid ceramic tiles light coloured 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match (Screed will be measured and paid seperately)

Coloured Glazed ceramic tiles in vertical surface 300 x 600 mm x 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match

Machine cut hand dressed kota stone slab flooring, 18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete. (Screed bed shall be measured and paid separately)

White marble 20 mm thick as in border lining in kota stone floor machine cut, bedded, jointed and pointed with white cement including cutting and polishing complete. (Screed bed shall be measured and paid separately)

Machine cut hand dressed kota stone slab flooring, 18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab and mirror polishing complete. (Backing coat of cement plaster shall be measured and paid separately)

Machine cut green marble slab, 18mm thick, single piece in full length of window cill/jamb over cement mortar screed/backing coat, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Screed bed or bedding layer 15 mm thick in cement mortar (1:4) for laying floor finishes.

Rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar (1:3) to recieve tiles.

Screed bed or bedding layer 10mm thick in cement mortar(1:4) for laying floor finishes.

Second class hard wood plain, solid, straight chowkats and frames, wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

Factory made 35mm thick 2nd class hardwood,factory made plain framed, panelled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering onboth faces.The size of rail and stile as perIS 1003 (Part I) kiln seasoned and chemically pressure treated all as specified

35 mm thick second class hard wood facotry made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a), Supplied and fitted to chowkats complete

Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

Painting to wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specifcation & drawing complete all as specified

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for Top & bottom rails. MS framed shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either edges side &as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement ,supply and fixing in the frame at site as per specification and drawing complete all as specified

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, length of bolt 250mm.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, length of bolt 150mm.

100 mm stainless steel butt hinges medium weight cold rolled and fixed to chowkats

150mm aluminium handles, cast type, anodised.

125mm aluminium handles, cast type, anodised.

Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 200 mm.

Drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28 mm .

Decorative finials of steel powder coated in matching colours of drapery rod

Hat and coat hooks, solid body, 175mm to 250mm long made of aluminium.

Rendering 15mm thick on fair faces of brick work or concrete surface finished even and smooth without using extra cement in cement mortar (1:6).

Rendering 20mm thick in two layers on fair faces of brick work, first layer 12 mm in CM 1:6 and second layer 8 mm thick in CM 1:4 with water proofing compound finished fair and even without using extra cement . Note:- Waterproofing compound will be measured and paid seperately.

Taking down 20mm dia bore GI steel tubing and connections including cleaning

Taking down 25mm dia bore GI steel tubing and connections including cleaning

Taking down 40mm dia bore GI steel tubing and connections including cleaning

Taking down PVC / Cast Iron soil/ waste pipe 100 / 75 mm bore including all fittings.

Forming jambs, etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in cement mortar (1:6), complete

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)complete all as specified

Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Taking down Chowkats with shutters (without taking off shutters from the frame) of area n.exc 1.5 Sqm each.

S & F MS framed work such as grills, gratings, etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290 Gde E-165.

Painting to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces.

S&F in repairs two piece EWC 680x360x765mm white, with seat cover and Twin flushing cistern complete all as specified and directed by Engr-in-Charge as per CERA -CAT No. S1021103 S Trap 230mm, CAT No S1060101 Cistern, CAT No B1510101 seat cover, CAT No B1810101 Twin Flush fittings or equivalent of Johnson/ Parryware/ Neycer all as specified

S & F in repairs Wash basin wall hung with half pedestal 550x400 mm as per CERA -CAT No. S2040105 wash basin and Cat No S2090102 Half pedestal complete or equivalent of Johnson/ Parryware/ Neycer all as specified all as specified

CPVC pipes, SDR 11, 40mm outer dia conforming to IS 15778 with all fittings such as Tee, bends, elbows, unions sockets and end pieces etc to receive the fittings and fixed with solvent concealed in walls/ floors/ ceiling or laying in floors complete all as specified

CPVC pipes, SDR 11, 25mm outer dia conforming to IS 15778 with all fittings such as Tee, bends, elbows, unions sockets and end pieces etc to receive the fittings and fixed with solvent concealed in walls/ floors/ ceiling or laying in floors complete all as specified

CPVC pipes, SDR 11, 20mm outer dia conforming to IS 15778 with all fittings such as Tee, bends, elbows, unions sockets and end pieces etc to receive the fittings and fixed with solvent concealed in walls/ floors/ ceiling or laying in floors complete all as specified

Waste fittings 32 mm dia, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified

PVC connections 15mm bore, 450mm length, with PTMT nuts.

PVC bottle trap having minimum water seal of 25 mm (Minimum weight 32 mm- 260 gms/ 40mm- 270 gms) of 32mm dia

S&F in repair pillar taps 15 mm bore, Cast Copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed Make: CERA Cat No. 2006101 or equivalent in Parryware/ Neycer

S&F in repair of bib tap 15 mm bore, Cast Copper alloy, chromium plated, fancy type Make: CERA Cat No. 2006151 or equivalent in Parryware/ Neycer

S&F in repair to stop valve cast copper alloy, chromium plated fancy type long shank and cup screwed down, screwed for iron/ CPVC pipes high pressure, with crutch or butterfly handle, screwed both ends for iron pipes /CPVC pipessuitable for 15mm bore pipes

Stainless steel soap dish, white of size 160X160X90 mm as approved fixed with brass screws or embedded in wall . Make : Cera Cat No. F5003106 or equivalent in other makes as specified

CP hand Health faucet of brass body with wall hook and 1mtr stainless steel braided rubber hose pipe fixed in repair complete all as specified and as directed.Make: Cera Cat No F8030102 or equivalent in Hindware / Parryware.

Towel rail brass chromium plated fancy type 60cm long including bracket fixed between flanges complete Make: Cera Cat No. F5007103 or equivalent in Hindware/ Parryware

Supply only integral water proofing compound, ISI marked.

Rendering 5mm thick on concrete surface finished even and smooth without using extra cement in cement mortar (1:3) as in ceiling .

Preparation of new plaster on ceilings and applying three coats of white wash after applying chalk whiting on plasterd surfaces all as specified

Complete removal of existing treatment on ceilings and applying three coats of white wash after applying chalk whiting on plasterd surfaces all as specified

Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of priming coat of alkali resistant priming paint over a wall care putty applying evenly all over surfaces of wall complete all as specified

Preparing new plaster on external surface of wall including removing fungus/ algae by wire brush, providing and applying two coats of Acrylic elastomeric exterior water proof coating with extra coat on rainlashed walls, projections & parapet wall top on primed surface with efflorescence resistant penetrating primer diluted with 50% water (Makes Rain coat by Dr Fixit/ Shalicryl by shalimar tar products (STP)

Complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of priming coat of alkali resistant priming paint and over a wall care putty applying evenly all over surfaces of wall complete

PVC (SWR) 110mm bore pipes single socketed, ISI marked, in any length with rubber ring joints, fixed to walls.

PVC (SWR) 75mm bore pipes single socketed, ISI marked, in any length with rubber ring joints, fixed to walls.

PVC Nahani traps of 75mm.all as specified

PVC (SWR) 75mm bore bends of any radius.

PVC (SWR) 110mm bore bends of any radius.

PVC (SWR) 75mm bore vent cowl complete.

PVC (SWR) 110mm bore vent cowl complete.

PVC (SWR) 75mm bore branch piece, single (single Y) equal or unequal.

PVC (SWR) 110mm bore branch piece, single (single Y) equal or unequal.

PVC (SWR) 110mm bore branch piece, double (double Y) equal or unequal.

Salt glazed stone ware gully trap square or round mouthed type 150 mm x 150 mm, Type 'P' complete.

Brickwork with sub class "B" bricksModular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

S&F in repairs 2000 litre capacity rotational moulded polythene water storage tank with closed top (cylindrical vertical type ), ISI marked, with minimum of double layer body, hoisted and fixed in position

Powder coated aluminium window side hung type without sash bars section as per IS-737 and weighing not less than 0.5kg/Rm including necessary jointing clips, rubber packing anodised snap beading , screws and stainless steel hinges, all aluminium fittings such as handles and friction stays and locking arrangements including fixing of 4mm thick sheet glass, etc complete all as specified and directed

Powder coated aluminium window side hung type without sash bars section as per IS-737 and weighing not less than 0.5kg/Rm including necessary jointing clips, rubber packing anodised snap beading , screws and stainless steel hinges, all aluminium fittings such as handles and friction stays and locking arrangements and stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperature 1.40mm for wire gauge, etc complete all as specified and directed

Aluminium powder coated fixed type ventilator without sash bar, centre to centre distance of horizontal & vertical members not exc 60 cm with 4 mm thick pinheaded/plain sheet glass,rubber packing with & including following powder coated section as given in 'JINDAL' catalouge complete all as specified and as directed (i) Frame (SP) -20052 (ii) Frame (DP) - 20051 (iii) Glazing clip - 19352 all as specified and directed

Aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed. Note:- (i) The thickness of the powder coating shall not be less than 0.5 micron. (ii) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.all as specified and directed

Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed

Brass chromium plated overhead shower rose 120 mm dia with 3 flow with swivel joint, including shower arm, fixing to steel pipe or union including taking down old shower rose complete all as directed and specified by Engr- in- Charge. Make Cera shower rose F7020305 shower arm F7040104 or equivalent in Hindware/ Parryware.all as specified and directed

Complete removal of external surface of wall including removing fungus/ algae by wire brush, providing and applying two coats of Acrylic elastomeric exterior water proof coating with extra coat on rainlashed walls, projections & parapet wall top on primed surface with efflorescence resistant penetrating primer diluted with 50% water (Makes Rain coat by Dr Fixit/ Shalicryl by shalimar tar products (STP)/ equivalent products)all as specified

Grating doom 100mm dia PTMT(minimum weight 25 gms)all as specified and directed

BLANK

Preparing RCC surfaces and shall be made dry, clean, even and checked for soundness, removal of oil, dirt, laitance and other contaminants by manually and surface shall be fairly smooth finish.Chamfering the floor wall junctions with cement mortar 1:4 admixed with Nitobond SBR or equivalent @1 litre per 50 Kg bag of cement. Down take Rain water pipe annular spce packing using Conbextra GP2 or equivalent mixed with water and filling as per manufacturer's specifications. Water ponding for minimum 48 Hrs and injection grouting of construction joints, leaking spot and honey combs with cementious pressure grouting with 40 psi pump using Cebex 100 or equivalent @ 225 gms mixed to 50 Kg bag of cement including joints packing using polymer modified mortar. Providing and applying water proof coating using Fosroc Nitoproof 600 or equivalent, over dry surface and 1.5 mm thick (2 coats) with interval period of 6 Hrs over a substrata using spray/ squeegee/ roller/ brush. Water proofing coating shall have the elongation of 500 - 700% (ASTM D412-90), tear resistance of 21 KN/ m (ASTM D624-90), and the tensile strength of >1.9 N/ mm2 (ASTM D412-90). Termination to be done on wall extending the coating to minimum 300 mm height above the finished floor level as per vendor recomendations. Laying 200 gsm non woven geo textile membrane over Nitoproof 600 coating with overlap sealed before providing screed concrete. Make: Fosroc or equivalent as approved by the GE. Screed to Slop:- Providing, batching, mixing, transporting through transit mixers, pumping and laying controlled Screed Concrete of M20 Grade of average 75 mm thickness with minimum thickness of 50 mm at drain points and a slope of 1:150 or required as per the site condition at all levels by admixing necessary admixers Conplast WL or eqivalent @ 150 ml per bag of cement and mixing Graded fibrilated 100% virgin poly propylene fibres in concrete at the rate of 0.90 Kg/ Cum as per manufacturers specifications. Treatment to continue along the vertical surface for 300 mm height in shape of round , water curing etc. The concrete shall be laid in panels of not more than 200 Sqm and grove cutting of 6 mm x 10 mm shall be provided in every 5 m x 5 m area, the joints shall be treated with elasomeric sealants Nitoseal PU 40 or eqivalent. Make: Fosroc or equivalent as approved by GE.

Ball or float valve 25 mm brass high pressure with polythene float and fly nut etc complete fixed in repairs.all as specified and directed

25 mm thick ccement concrete Type B0 (1:2:4) using 12.5 mm graded stone aggregate) as in floor (levelling course below ceramic tiles) complete all as specified.

Vitreous china urinal, coloured of size 420 x 395 x 635 mm large flat back with all fittings including spreader, CP connection suitable for 15 mm bore stop valve, discharge pipe and taking down the existing one. Make CERA Cat No. S4020102 and urinal spreader CERA Cat No. F8070201 or equivalent in Parryware/ Neycer complete all as specified and as directed.

S&F in repairs High density polythylene (HDPE) pipes 50 mm dia, of pressure rating 6 Kg/sq cm, fixed to walls, ceilings or in floors complete all as specified and as directed.

20 mm thick Makrana white marble tiles machine cut, both sides pre-polished, in urinal partition and jointed with grey cement slurry including cutting and polishing and pointing in white cement (1:2) match with marble shade complete.all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items shall be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

Point wiring with 1.5 Sqmm PVC insulated unsheathed FRLS multistranded single core copper conductor cable 1100 volt grade in PVC surface conduit and conduit accessories including cuting, chiseling, filling, plastering and making good to the disturbed surfaces of wall/ floor and also to match with the existing surface etc duly fixed on wall including 1.6 mm thick MS sheet pressed terminal box with 3mm thick laminated hylem top cover including 1.5 Sqmm PVC insulated copper conductor earth continuity wire complete all as specified and as directed by the Engineer-in-Charge for following:-

(a) one light point controlled by one switch of 6 Amp, single pole.

(b) one 3 pin socket out let, 5/6 Amps,controlled by one switch on independent board

(c) one 3 pin socket out let, 5/6 Amps, controlled by one switch on the same board.

Point wiring with 2.5 Sqmm PVC insulated unsheathed FRLS multistranded single core copper conductor cable 1100 volt grade in PVC surface conduit and conduit accessories including cuting, chiseling, filling, plastering and making good to the disturbed surfaces of wall/ floor and also to match with the existing surface etc duly fixed on wall including 1.6 mm thick MS sheet pressed terminal box with 3mm thick laminated hylem top cover including 2.5 Sqmm PVC insulated copper conductor earth continuity wire complete all as specified and as directed by the Engineer-in-Charge for one 3 pin, 15 A socket outlet on independent board .

Flush type switch piano, 5/6 Amp, one way, SP, 230 volt.

Ceiling rose, surface bakelite, 65mm x 50mm, 3 terminals.

Switch socket combination 2 in 1, 3 pin, 5/15 Amp, flush type, universal.

3/5 pin switch socket combination, 2 in 1, 6 Amp, flush type, 230 volt.

Socket multipurpose 2 in 1, 3/5 pin, 5 Amps , flush type single pole complete.

MCCB DB VTPN 4 way double door 415 Volts with provision for MCCB 63 Amps 25 kA as incomer and SP/ TP MCBs as out going with IP 43 protection, door earthing , isolated neutral bar, mechanical impact strength IK 09 including cement spill protector Make: Legrand Cat Part No. 507745 or equivalent of Schneider/ L&T

MCB DB SPN 8 ways with metal double door 240 Volts with IP 43 protection including door earthing complete all as specified Make: Legrand Cat No. 507611 or equivalent of Schneider/ L & T

MCB TPN DB 415 V, AC, 4 ways with 200 Amps rated bus bar suitable for MCB four pole as incomer and MCB SP/ TP as out going having IP 43 protection double door with acrylic cover Make: Legrand Cat No. 507680 or equivalent of Schneider/ L & T

MCB TPN, 63 Amps, 10 kA with charecteristic "C" curve Make: Legrand Cat No408659 or equivalant of Schneider/ L & T

Sub main wiring with; 2 No single core PVC insulated-unsheathed 6 Sq mm PVC insulated unsheathed copper conductor multistranded FRLS cable for phase & neutral & 1 no single core PVC insulated unsheathed 6 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable dia (but not less than 25 mm dia) suface rigid non metallic PVC conduit with fittings complete. (length of 2 no 6 Sq mm conductor cable for 'phase & neutral', 1 no 6 Sq mm conductor cable for earth continuity cable & PVC conduit shall be measured as one unit length)

Sub main wiring with; 2 no single core PVC insulated-unsheathed 4 Sq mm stranded copper conductor cable for phase & neutral & 1 no single core PVC insulated unsheathed 4 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable dia (but not less than 25 mm dia) surface rigid non metallic PVC conduit with fittings complete. (length of 2 no 4 Sq mm conductor cable for 'phase & neutral', 1 no 4 Sq mm conductor cable for earth continuity cable & PVC conduit shall be measured as one unit length)

M & L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all shown in electric plate No. 3 (of SSR Part-I) connected to earthing test point all as specified or indicated including provision of necessary excavation and earth work in any type of soil, PCC(1:3:6) type C-1 pit chamber with precast RCC (1:2:4) type B-1 , 40 mm thick cover reinforced with 6mm round MS bars in both ways , 20 mm bore medium grade watering pipe, water funnel, 40 mm bore GI medium grade protection pipe, common salt, charcoal dust, returning, filling in of soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion complete all as specified.

MCB SPN 10-32 Amps 10 kA with charecteristic 'B/C' Curve Make: Legrand Cat No408609 to 408617 or equivalent of Schneider/ L &T

MCB SP 06-32 Amps 10 kA with charecteristic 'B/C' curve conforming to IS/ IEC 60898 Make: Legrand Cat No. 408587 to 408595 or equivalent of Schneider/ L & T

Taking down existing LED tube light fitting without damage of any capacity and keeping in safe custody and refixing the same after completion of wiring by using 2 Nos of PVC Square box of suitable size and connection with 3 core flexible copper cable as directed by Engr-in-Charge.

VIJAYA ENTERPRISES

M/S BHASKAR MANIKRAO PAWAR

Mehta Construction Co.