Rep. and maint. of 6.6kV OHL mines feeder like replacement of damaged rusted and weak poles, maintaining earth continuity and cradling any cross as req. for strengthening of 6.6kV OHL structure from QNo. 01 Sub-station to the mines under PND OCP

Amount

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required. Above 10.00 Metre and upto 12.00 Metre.

Supply and erection of stay set complete (galvanized) with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm x 60 cm), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Erection of all aluminum conductor of 7/1.96 mm to 7/3.10 mm diameter and above including binding etc as required.

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11 KV overhead line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm MS flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/fittings, bolts nuts and washer etc (as per drawing) and painting with primer and finish paint as required.

Erection of double pole 3 wire cross arm for 11KV/22KV/33KV OH Lines as required.

Supplying of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) V shape cross arm for two wire 11 KV over head line conductor complete with 50 mm x 6 mm flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts, washers etc (as per drawing) and painting with primer and finished paint as required.

Erection of pole top / straight two wire/ V shape two wire, angle iron / channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required.

Supplying and erection of a set of cross bracing FRL same work for 11 KV over head line double pole structure having four members fabricated out of 50mm x 50mm x 6mm angle iron to form a rectangle of minimum size 1400 mm width x 2500 mm height, complete with 50 mm x 6mm MS Flats iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts etc. (as per drawing) and painting with primer and finish paint ,as required.

Supplying and Erection of 11 KV disc insulator for 11 KV overhead lines with galvanized insulator fittings, ball and socket type and complete with galvanized strain clamps, bolts, nuts, washers etc. as required.

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Erection of disc / pin insulator for 11 KV over head lines as required.

Supply of 8 / 6 SWG G.I. wire.

Erection of G.I. Wire No. 8 SWG including binding etc. as required.

Erection of cradle Guard as required.

Dismantling of pole / street light standard / strut embedded in cement concrete foundation etc as required.

Dismantling of over head lines comprising of copper / aluminium over head conductor, G.I. wire, cross arms, insulators etc as required.

Total impact of GST for the purpose of CTC

M/S Mack Milan and Co

R.K.SINGH & CO.