Construction of SDO room and JE room at rose garden Bhakra Dam

Amount

Earth work in excavation of foundations of bridges culverts, building including handling of materials with combined lead of 15 meters dressing of bed and sides stacking the excavated soil clear from the edge of excavation and subsequent filling around:- For semi conglomerate or soil of nature of pick jumper work. [ As per CSR-2020 item No. 6.7 ( b ) ]

Cement concrete 1:6:12 with stone aggregate 40 mm gauge mixing by mechanical means using concrete mixers volumetric type. [ As per CSR-2020 item No. 10.8 ( b ) ii ]

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth. [ As per CSR-2020 item No. 11.3 ] (i)

Damp proof course 4 cm thick of cement concrete 1:2:4 with two coats of bitumen 20/30 penetration @ 1.65 kg per sqm laid hot and sanded. [ As per CSR-2020 item No. 10.26 ]

First class burnt brick work laid in cement sand mortar 1:6 in first story up to 4 meters above plinth level. [ As per CSR-2020 item No. 11.4 ] (i)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrated but excluding steel reinforcement centering and shuttering in uperstructure. [ As per CSR-2020 item No. 10.20 ]

Centering and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels [ As per CSR-2020 item No. 9.6 ]

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. [ As per CSR-2020 item No. 9.8 ]

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete. [ As per CSR-2020 item No. 18.18 ]

12.5 mm thick cement plaster 1:6 [ As per CSR-2020 item No. 15.11 ]

20mm thick cement plaster 1:6 in two coat work [ As per CSR-2020 item No. 15.28 ]

10 mm thick cement plaster 1:4. [ As per CSR-2010 item No. 15.6 ]

Base course of floor consisting of 100mm thick cement concrete 1:8:16 filling using mechanical mixer for mixing of material. [ As per CSR-2020 item No. 14.3 ]

Providing and laying vitrified floor tiles indifferent sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished) Size 600x600 mm ( CSR item no. 14.112 a)

( a ) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) :For fixed portion and chowkhats. [As per CSR-2020 item No. 17.45 ( a) ]

( b ) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required [ As per CSR-2020 item No. 17.45 ( b ) ]

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. ( Cost of aluminium snap beading shall be paid in basic item) Float glass panes of 4mm thickness [ As per CSR-2020 item No. 17.47-ii ]

Providing & fixing stainless steel jali

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)(a)For shutter area up to 0.50 sqm [ As per CSR-2020 item No. 17.23-i ]

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)(b) For shutter area above 0.50 sqm [ As per CSR-2020 item No. 17.23-ii

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. [ As per CSR-2020item No. 17.46-ii ]

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete ISI designation no I (Size of door up to 700mm) (CSR item No. 17.43 (a)

Electrification charges:- Wiring in PVC insulated copper conductor single core FR cable (ISI marked), overall1.5sq. mm, 1100volts grade to be laid inHDPE electrical conduit pipe 20mm/25mmdia. ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3universal socket (shuttered), 16/20Amp.combined/ universal Socket (shuttered),6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CICircular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm,1100volts grade (For 6Amp. wall socket &plug control point) and other petty materialetc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-A Wiring fan point (Without fan box)As per CSR 2020 Item No. 34.03 (i) a

Wiring light point.As per CSR2020 Item No. 34.03 (ii)

Wiring 6Amp. Plug control comprising wall socket point. As per CSR2020 Item No. 34.03 (v)

Wiring call-bell point ( As per CSR 2020 Item No. 34.03 (iii) )

ATUL SHARMA GOVT. CONTRACTOR

ASHISH KUMAR GOVT CONTRACTOR