SPL REPAIR TO CERTAIN TOILETS AND CONNECTED B/R WORKS OF AGE B/R (WEST) AND BSO (WEST) OFFICE COMPLEX AND SEWAGE LINE (APPROX LENGTH 100 MTR) IN THE AOR OF EMB HQ UNDER GE (W) COLABA

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified & directed

Dismantling of wall and ceiling boards ( fibre pulp insulation etc) of any thickness including cover fillets all as specifed and directed.

Taking down Chowkhats and shutters of windows/ventilators with wire mesh / glass and MS grills of any size including all fittings and fixtures all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified & directed

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

M&L in repairs RCC work as in columns, beams, slabs, retaining walls, chajja, railing or similiar work using 1:1.5:3 with required plastisizer plant (using 20 mm graded crushed stone aggregate) including necessary equipment needed to carry out the work for finishing (compactor, vibrator, Trowel, groove cutter pump for pouring concrete ) with provision for joints all as specified and directed.

Use and waste special water tight centering and shuttering including bolting, strutting, propping so as to with stand a pressure of 0.1 Mpa including removal of form work at all locations including beams, columns, slabs, walls, foundations, footings, landings, stairscase, balconies all as specified and directed.

M&L mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height all as specified and directed.

M&L mild steel TMT bars 8 mm dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed

S&F structural steel work in tubular/square tube trusses including special shaped washer, gusset/bearing plate using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 all as specified and directed.

S&F rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality A as specified & directed .

S&F framed work such as grills, gratings with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified & directed

S&F joist, channel, angle or tee section fixed indpendently, without connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A including welding, nuts and bolts all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, eaves fixed with self tapping screws all as specified and directed.

Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level) and removing the demolished material and debris out side MD land all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, flooring/sub base including necessary shuttering all as specified and directed.

M&L broken stone or boulders hard core of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface using power roller all a specified and directed.

M&L providing PCC 1:4:8 type D2, 100mm thick (using 40 mm graded crushed stone aggregate) for sub base all as specified and directed.

M&L earth filling in floors spreading and leveling in layers, well ramming including watering as required all as specified and directed.

S&F 18 to19 mm thick HDHMR board, prelaminated one side with decorative choice lamination & other side high glossy acrylic sheet of 3mm thick, exterior grade, with MS with black coating 550 mm long drawer channel, SS handle, SS butt hinges fixed with screws to frame work as in cup borad & kitchen cabinet shutters and all other similar works all as specified and directed.

S&F WPC louvers wooden/any colour panel width -219 mm length 2400 mm thickness 25 mm Plain / coloured / wooden texture PE / PVDF, Core material of Non-toxic polyethylene, Macromolecular lamination film, Rear side of Aluminum coated with primer and including frame work using of Fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium / steel / wooden / ply board, Blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint / structural silicone sealant / pre-formed gaskets to the Horizontal & Vertical Joints in the Aluminium cladding / facade as per manufacturer's instructions all as specified and directed. Note : 1. The unit rate quoted is deemed to be inclusive of all necessary fixing acceserries mentioned in the description of work and scaffolding works at any height for installation. 2. For payment purpose panels areas will be measured on one side only.

S&F 18mm thick UV coating, MDF board exterior grade, both side laminated with any colour anti fungal, moisture resistence, anti borer, as per IS 14587 for kitchen/cupboards shelfs fixing with 1st class hard wood lipping/beading all as specified and directed. NOTE:- Sample as approved by GE .

S&F SS 304 Grade metal letters of height 200mm with PU paint to match the logo colors, mirror polish finish, anti rust and including necesssary arrangements to fixing in walls, using scaffolding at any height all as specified and directed.

S&F 3 mm thick panel of any type, pattern and shape Aluminium Composite Panel (ACP), aluminium thickness of 0.5mm, front side finish of aluminum roll coated with Plain / coloured / wooden texture PE / PVDF, Core material of Non-toxic polyethylene, Macromolecular lamination film, Rear side of Aluminum coated with primer and including frame work using of Fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium / steel / wooden / ply board, Blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint / structural silicone sealant / pre-formed gaskets to the Horizontal & Vertical Joints in the Aluminium cladding / facade as per manufacturer's instructions all as specified and directed. Note : 1. The unit rate quoted is deemed to be inclusive of all necessary fixing acceserries mentioned in the description of work and scaffolding works at any height for installation. 2. For payment purpose panel areas will be measured on one side only.

M&L for Anti skid rectified ceramic digital coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm in floors etc. set and jointed in neat cement slurry laid over 15 mm thick screed bed in cement mortar 1:6 and pointed in white or coloured cement to match the shades of the tiles all as specified and directed.

M&L Anti skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

S&F gold ceramic pencil tiles size 8-10 mm medium size glossy finish fixing in dado spacing all as specified and directed.

M&L for Glazed high defination digital polished ceramic tiles 600x300x 7/1200x 600x 7 mm mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry & pointed in coloured cement to match the shades of the tiles laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. Note:- (Rate of Designer border in vertical surface shall be deemed to be included into quoted rate)

M&L any coloured vitrified heavy duty outdoor anti, skid full, bull -noise finish, self embossed grooves body tiles 10 mm thick (Square/rectangular, 600mm x 600mm) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including 20 mm thick cement plaster in CM (1:4) for fixing tiles any where all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L Granite (of any type and colour) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/Jambs/WHB conters and all other similar works in approved design over 20 mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L machine cut, polished cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rounding the edges as in kitchen platform, flooring and all other similar works, including laying over 15mm thick cement mortar (1:6) all as specified and directed.

M&L for GI powder coated frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed.

M&L for 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 600x600 mm grids all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.

M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making, provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all as per architectural drawings and the directions of Engineer-in-Charge. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clips, hionges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

M&L 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side all as specified and directed.

M&L 4mm mm thick frosted glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side all as specified and directed.

S&F 12mm thick, toughened/frousted glass for door shutters, partitions in bathroom or other places, shelves, table top and in similar work with and including fitting and fixtures such as glass handles stainless steel studs, fittings for door pivots all as specified and directed .

S&F Sun control film, 50 micron non reflective type, sticked to glass as per manufacturers instructions and as directed.

S&F stainless steel 202 Stain finish Handle D type, 25mm dia 600mm long for glass shutter all as specified and directed

S&F bottom/top patch fitting for pivot all as specified and directed

S&F bottom lock patch fitting all as specified and directed

S&F stainless steel grating round 125mm size of anti- cockroach, anti-clog, anti faul all as specified and directed

M&L for preparation of new steel surface of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum specification as per IS 15931: 2012 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast unserviceable fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge.

S&F factory made 28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size, modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof specification as per IS 15931: 2012 and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed by Engr-in-Charge.

S&F 40 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, both faces is covered with decorative face Laminate both side with including 5mm thick teakwood lipping all around / frame to match on both side with supply & fixing stainless steel, double action with handle all as specified & directed.

S&F in repairs 15 mm dia brass CP fancy wall mixer with L Bend (including provision of O/H shower & hand shower) for mixing hot & cold water screwed down for iron pipe and fixed as in repairs with hand shower all as specified and directed.

S&F sheet glass ordinary quality 3 mm thick not exc 0.50 Sqm in each panes and glazing with oil putty all as specified and directed..

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or Aluminium beadding all as specified and directed..

S&F floor door stopper of aluminium alloy body and tongue, length of leg 140 mm, anodised, with hard drawn steel spring and rubber foot all as specified and directed.

S&F extruded aluminium alloy handles 150 mm, fabricated type, anodized all as specified and directed..

S&F aluminium anodised, barrel tower bolts of extruded section and fixed of 150 mm size all as specified and directed.

S&F butt hinges of size 100 mm, medium weight, stainless steel min 3 mm thick for doors of design all as specified and directed.

Demolition of brick/block masonary built in cement mortar all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) all as specified and directed.

M&L precast cement concrete 1:3:6 type C1 block masonry with solid blocks of size 390x300x200 mm exc 10 cm in width and set in cement mortar 1:4 all as specified & directed

M&L Brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:4 all as specified and directed.

M&L in repairs RCC 1:2:4 type B-1 (Nominal mix ) (using 20mm graded crushed stone aggregate) as in precast cover slab perforated fixed in position, tie between two brick walls and all other similar works set in CM 1:4 including necessary form work all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces including racking out joints, hacking for key, scrubbing down with water and removing debris outside MD land all as specified and directed.

M&L Ready mix plaster for external plastering 25 mm thick in two coats of 15 mm base coat and 10 mm finishing coat on brick wall or concrete surfaces and cement mortar with WPC 3% weight of cement all as specified and directed. (WPC shall be measured and paid separately)

Supply only integral water proofing compound all as specified and directed.

M&L for Ready mix plaster for internal plastering 12 mm thick on brick wall or concrete surfaces and cement mortar including use of scaffolding all as specified and directed.

M&L for Ready mix plaster for ceiling plastering 5 mm finishing coat on brick wall or concrete surfaces and cement mortar including use of scaffolding all as specified and directed.

Providing & applying anti algalwater-based Elastomeric exterior wall finish on old as well as newly plastered surface including surface preparation, applying suitable wall Primer and application of two coats of paint by brush all as specified and directed. Note : Height of Bldg Up to fourth floor.

M&L for preparation of newly plastered wall /celling surfaces and applying a coat of wall care putty (Birla White Wall care or equivalent) 2mm thick ( in two coat 1 mm each ) average on plastered surfaces rubbing with sand paper, preparatory to distempering and applying two coats of acryilic emulsuion over a coat of alkali resistant priming paint all as specified and directed.

S&F steel water tubing galvanised iron medium grade 20 mm bore (ISI Marked) of following size, with all fitting fixed complete to walls and ceilings or laid in floor/wall/ceiling in high rise building & scafolding all as specified and directed.

S&F in repairs steel water tubing galvanised medium grade 15 mm bore (ISI Marked) of following size, with all fitting fixed complete to walls and ceilings or laid in floor/wall/ceiling in high rise building & scafolding all as specified and directed.

Cutting chases, pinning in and making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n exc. 10cm girth all as specified and directed.

Refixing old 15mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) all as specified and directed.

Refixing old 20mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) all as specified and directed.

Taking down rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. and removal to Store all as specified and directed. (measured overall as fixed along the centre line over fittings and accessories).

S&F PVC (SWR) , 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts all as specified and directed.

S&F 110mm dia PVC (SWR) bends of any radius all as specified and directed.

S&F 75 mm dia PVC (SWR) bends of any radius complete all as specified and directed.

S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal all as specified and directed.

S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequal all as specified and directed.

S&F 110 mm PVC (SWR) junction single, (Single Y) equal or unequal all as specified and directed.

S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequal all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed..

S&F PVC (SWR) floor trap 75 mm, plain with CP grating including joining and solvent cement all as specified and directed.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, 60cm long between flanges all as specified and directed.

S&F in repairs 15 mm bore gun metal gate valve cast copper alloy, screwed down high pressure with wheel head, screwed both ends with crutch or butterfly handle for iron pipes all as specified and directed.

S&F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repairs Vitreous China Wash hand basin, white, oval shape counter top , size 360x360x115 mm size, SLS-WHT-0611F, excluding taps, chain & plug & porcelain stopper but including brackets, 40/32 mm dia PVC waste pipe, PVC connection, chromium plated coupling 32 mm dia, approved pedestal SLS-WHT-1510 & cutting for and pinning ends of brackets or erecting stand all as specified and directed. Make : Cat Part No KS 6 289of Kervit Series or equivalent in Jaquar/Parryware.

S&F in repairs 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe all as specified & directed.

S&F in repairs 15mm bore, two way bib tap chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe all as specified & directed.

S&F in repairs 1000 litre rotational moulded PVC tank 3 layer in position at any location on top of the building including removing existing tank disconnecting all incoming and out going connections, provision of new fittings including with float valve suitable up to 50mm bore GI pipe all as per existing requirements all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 590x 445x300 mm mm white, with integral foot rests including P or S trap (excluding flushing cistern and flush pipe) all as specified and directed.

S&F in repairs Vitreous China half stall urinals of any colour complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, magnum urinal spreader pointing around urinal back in cement flush pipe, grating and Union for discharge pipe all as specified & directed .

S&F in repairs wall mounted water closet pan of size 520x360x410mm fixed with anchour fastener, outlet pipe & accessories of any size all as specified and directed.

M&L in repairs 15 mm bore fancy type health faucet with SS hose all as specified and directed.

M&L in repairs fancy type 15 mm bore central hole basin mixture with 'U' shaped round casted spout with 3" long pipe connection with aerator all as specified and directed.

S&F in repairs counter Table Top wash basin shape 460X345x130 mm fixed with waste coupling & waste pipe & accessories of any size all as specified and directed.

S&F in repairs One piece EWC water closet single piece EWC 660x350x745 mm including cistern, PP slim soft close seat cover and hinge, fitting accesorries, Accesories set and cistern fittings, fixed with waste coupling and waste pipe all as specified and directed.

S&F in repairs Toilet paper holder along with cover of stainless steel suitable for 120mm width and 100mm depth long paper fixed to walls sample approved by GE

S&F in repairs decorative corner, 6mm thick glass self round, 300mm size with SS railing 25mm high in bath room, fixed with 'D' type brackets on walls af approved make and pattern all as specified and directed.

S&F in repairs Premium CP Towel rack with hook for bath room /towel stand /hanger/bathroom (24 in-chrome) all as specified and directed.

S&F in repairs Liquid soap dispenser fixed with robe hook all as specified & directed.

S&F in repairs Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union alongwith arm 225mm and flange all as specified and directed.

S&F in repairs CP soap dish all as specified and directed.

S&F in repairs fancy type CP brass angular stop cock/angle valve suitable for 15mm bore GI tubing, with necessary fittings all as specified and directed.

S&F in repairs fancy Concealed stop valve with long shank and adjustable wall flange including union suitable for 15mm bore GI tubing, with necessary fittings all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, internal dia of pipe 150mm all as specified and directed.

S&F in repairs reinforced concrete pipes, class NP2, 150 mm dia laid and jointed with collars all as specifed and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) concrete bed to 150 mm dia drain pipes including packing under and hauching & benching against the sides of pipes after they are laid and tested all as specified and directed Note :- (i) Thickness of bed below the barrel of pipes: 15cm for pipes 200mm dia and over. (ii) Width of bed: Outer diameter of drain pipes (not of sockets/collars) plus 30 cm (iii) The rate includes for any necessary shuttering and supports to concrete and for laying beds to falls.

S&F 50 mm dia low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm fixed complete to walls, ceiling or in floors including cutting, chasing, pinning and making floor good with existing one all as specified and directed.

S&F in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231) with PVC inlet ball valve, float and handle, 10 litres capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern , set with concrete and making good to floor including taking down existing complete all as specified & directed.

Excavation in trenches nexc 1.50 m wide and nexc 1.50 m in depth and getting out in soft loose soil all as specified and directed.

Excavation over areas by mechanical means (Hydraulic excavator) not exc 1.5m deep and getting out in any type of soil all as specified and directed.

Excavation over area by mechanical means (Hydraulic excavator) exc 1.5m but not exc 3m deep and getting out in any type of soil all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick wall or stone surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement all as specified and directed.

Supply only liquid integral water proofing compound all as specified and as directed.

M&L PCC 1:2:4, type B-2 (using 40 mm graded crushed stone aggregate) in foundations filling and mass concrete all as specified and directed.

M&L 600 mm bore (internal dia of pipe) reinforced concrete pipes, Class NP3 laid in trenches and jointed in CM (1:1) all as specified and directed.

M&L 300 mm bore (internal dia of pipe) reinforced concrete pipes, Class NP3 laid in trenches and jointed in CM (1:1) all as specified and directed.

M&L 200 mm bore (internal dia of pipe) reinforced concrete pipes, Class NP3 laid in trenches and jointed in CM (1:1) all as specified and directed.

M&L PCC 1:3:6 type C2, (using 40 mm graded crushed stone aggragate) as in concrete bed to 200 mm bore drain pipes including packing under and completely surrounidng pipes with concrete after pipe laid and tested all as specified and directed.

M&L PCC 1:3:6 type C2, (using 40 mm graded crushed stone aggragate) as in concrete bed to 300 mm bore drain pipe including packing under and completely surrounidng pipes with concrete after pipe laid and tested all as specified and as directed.

M&L PCC 1:3:6 type C2, (using 40 mm graded crushed stone aggragate) as in concrete bed to 600 mm bore drain pipe including packing under and completely surrounidng pipes with concrete after pipe laid and tested all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm all as specified and directed.

Removing excavated (soil) materials and deposited out side of MD land up to a distance of 15 km all as specified and directed.

M&L factory made CI Manhole cover, heavy duty, single seal comforming to Fe-150 IS-210-1978 icluding 2 sets of manhole cover lifting and unlocking key to suit each other type manhole cover (sample as approved by GE) all as specified and directed.

S&F rolled mild steel angle iron frame work such as in manhole cover all as specified & directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggragate) 75mm thick as in sub base all as specified and directed

M&L machine pressed precast cement concrete interlocking paver block of any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M- 40 grade with grey cement and pigment including 25 mm thick sand cushioning layer all as specified and directed

M&L chequred cement concrete tiles 20 cm x20cm x25 mm thick set and jointed and pointed in neat cement slurry using grey cement wihtout pigment including screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes all as specified and directed

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in PCC, kerb, mud stops rounded or chamfered for securing interlocking tiles all as specified and directed

M&L RCC M-25 Design Mix (using 20mm graded crushed stone aggregate) as in slab supported on wall all as specified and directed

Use & waste form work to sides of concrete slabs for rough finished surface of concrete flat edges of footing all as specified and directed

M&L 150 mm thick soling (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolied to required gradient and camber all as specified and directed.

M&L bituminous macadam not exceeding 75 mm thickness (compacted thickness) using hot mix plant and mechanical paver with 4% binder (paving grade bitumen VG-30 grade) content by weight of total mix, rolled and compacted with power roller 8 to 10 tonnes to required camber and gradient all as specified and directed.

Preparing black top surface with wire brush for removing caked mud etc sweeping with broom and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer (paving bitumen) @ of 5 Kg/10 Sqm of surface all as specified and directed

M&L for bituminous premix asphaltic dense concrete 40 mm (compacted thickness) using graded crushed stone aggregate premixed with binder (paving grade bitumen VG 30 grade) @ 6% by weight of total mix & hydraulic lime filler, rolled and compacted to required camber and gradient all as specified and as directed. Note :- (i) bituminous premix asphaltic dense concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined following the Marshall Mix Design procedure contained in the Asphaltic Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs. 55 per kg.

Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil, grease and foreign material all as specified and directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and to deposit all item to MES/ BSO store yard or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling all as specified & directed.

M&L for point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for concealed boxes and for concealed conduit wiring with all fittings and accessories including modular cover plates as required with and fix conealed 1.2 mm thick pressed steel modular sunken box, suitable for fixing moduler switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, to match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I for one light point controlled by one modular switch, 1 way 6/10 amps, 1 module.

All as per Srl item No. 141 here in before but for Exhaust Fan controled by one switch.

All as per Srl item 141 here in before but for socket outlet point 5 Amp on Independent board.

S&F modular switch 1 way 10 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame all as specified and directed.

S&F modular sockets 6A, 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate all as specified and directed.

S&F ceiling rose surface bakelite 65x50mm, 3 terminal all as specified and directed.

S&F LED Batten lights fitting 1x 20W, 220V, AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete pre wired fixed to wall with 2 nos PVC block of suitable size all spcifided and directed. Note: Connection should be made neatly using two core flexible cable.

S&F LED lights fitting 1x 10W, 220 V mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size completeV, AC decorative box type, bright white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete pre wired fixed to wall with 2 nos PVC block of suitable size all spcifided and directed.

S&F exhaust fan 230 volt, 250 mm sweep, plastic body with wooden frame including making all electric connection including cutting of hole on wall and makng good to disturbed surface of wall and outer wooden box for fan fix on wall and taking down and depositing old exhaust fan safely to MES store all as specified and directed.

S&F exhaust fan 230 volts, 300mm, metal heavy duty with wooden frame including making all electric connection including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall.

S&F LED 18 Watt 3000 K/6500K, Slim raccess mounted LED panel with premium diffuser to ensure glare free & even light distribution in LIFT Corridor area, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed.

S&F in repairs LED building security light fitting 35/45 watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minimum 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light with GI clamp including connected accessories and bracket made of GI pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers, etc. all as directed by Engineer-in-Charge. Note : The rate quoted must be inclusive of 3 core 1.5sqmm cable for connecting the light to switch/supply.

S&F in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection all as specified and directed.

S&F in repairs MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series all as specified and directed

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.

Taking down carefully copper/aluminum submain wiring/cables including all fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces all as specified and directed.

M&L Sub main wiring with four run of FRLSH of 4 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires for from Panel / Main DB to house TPN/SPN DB all as specified & as directed by engr-in-charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement four runs of 4 sqmm cable and one run of 4 sqmm cable with PVC conduite shall be measured as one length.

Supply and lay in trenches, floors, fix on wall/pole, passing through pipes LT UG cable, 1100 volts grade, PVC/XLPE insulated with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs etc of size 10 Sqmm 2 core, confirming to IS specification all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6 mm buried directly in ground vertically to a depth not less than 2.25 metre deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level & connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing on completion all as shown in Electrical Plate No 3 of SSR part -I.

Nilesh Construction

SHRI SAI ENTERPRISES

Unity Enterprises

SHREE JAGDISH FURNITURE CO.

Bidder Name

HINDUSTAN BUILDERS

Nilesh Construction

Unity Enterprises

SHRI SAI ENTERPRISES

SHREE JAGDISH FURNITURE CO.