SPECIAL REPAIR TO BUILDING NO CB 06 AND CHAJJA TREATEMENT TO BUILDING NO CB 125 126 127 134 135 136 165 167 169 AND CERTAIN MINOR REVENUE WORK UNDER GE MIS MHOW

Amount

Taking down shuters of any description n.exc 1 sqm each and removing from site complete all as specified and as directed.

Taking down shuters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 sqm but n.exc 4.0 sqm each complete all as specified and as directed.

S & F second class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F Mild steel angle or flat iron, small articles such as hold fast , brackets, straps, cleats, etc for door/window chowkats including applying two coats of red oxide primer complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed blocks of hold fast, etc complete all as specified and as directed.

S&F 35mm thick factory made second class hard wood plain, framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30 mm thick factory made, second class hard wood glazed and skeleton shutters, open rebeated and prepared to received glass, gauzed divided into square with sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (b) for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S & F 35 mm thick factory made, second class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, without sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm thick colour PVC sheet reinforced with MS square tube,supplying and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

Preparation of new wood and wood based surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S & F galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

S & F in repair galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm each pane complete all as specified and as directed.

Hacking out old broken glass ( any thickness, size ,quality or description ) from wooden frame or stone etc and S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified and directed.

S&F Butt hinges of size 100mm medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F aluminum alloy handles fabricated anodised of 150 mm long complete all as specified and directed. .

S&F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber piece in floor, etc complete all as specified and directed.

S&F in repair 25 mm dia mild steel chromium plated drappery curtain rod with fixing bracket complete all as specified and directed .

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified and as directed.

M&L for brick work in CM ( 1:6 ) using sub class `B ` modular brick straight or curved on plan exceeding 6.0m mean radius complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in CM ( 1:6 ) on fair faces of wall/ concrete surfaces finished even and fair complete all as specified and directed.

M & L for applying two coats of first quality oil emulsion distember over new prepared surface of wall with putty complete all as specified and directed. Note:- Putty shall be measured and paid seperately under Ser Item No. 37

M & L for preparation of new plastered surface of walls and applying two coats of Acrylic Smooth exterior paint of required shade @ 1.67 litres/10 sqm over a coat of primer @ 2.20 kg/10 sqm of same make base all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coats of first quality oil emulsion distemper white/coloured over a coat of cement base white wall care based putty (where it is required in Patches) all as specified and directed by Engr-in-Charge. Note:- Putty shall be measured and paid seperately under Ser Item No. 37

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of first quality oil emulsion distemper all as specified and directed.

Preparation of old painted surfaces of wood/wood based materials exc 10cm in width or girth and applying one coat of synthetic enamel paint as directed and specified.

All as per item No. 32 above but on steel surfaces complete all as specified and directed.

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured over a coat of primer of same make over white cement based putty (where it is required in patches) all as specified and directed. Note:Putty shall be measured and paid seperately under Ser Item No. 37.

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying and applying two coats of Acrylic Smooth exterior paint of required shade over a coat of primer of same make over white cement based putty (where it is required in patches)all as specified and directed. Note:- Putty shall be measured and paid seperately under Ser Item No. 37

M&L for preparation of newly plaster surface of wall and applying 2mm thick cement base wall care putty in two coats (each coat not less than 1mm) and finished the surface even and smooth with sand paper complete all as specified and directed

M&L for complete removal of existing treatment from wall (any no. of layers) and applying 2mm thick white cement base wall care putty in two coats (each coat not less than 1mm) and finished the surface even and smooth with sand paper complete all as specified and directed

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .

M&L for PCC (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specified and directed

M & L for 75mm thick plain cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with clolour of tile including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified and as directed.

M&L for non –skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of the tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed.

M&L for scratch free vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

All as per item No 45 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size not less than 300x250x7 mm thick as in vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size not less than 450x300x7 mm thick as in vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M & L for machine cut kota stone slab in flooring 20mm to 25mm thick of size not less than 595mm x 595mm as in floor and laid over and including 15mm thick screed bed in CM 1:6 & set jointed and pointed in cement mixed with pigment to match the shade of slab including rubbing, polishing complete all as specified and as directed.

S&F in repair for machine cut kota stone slab flooring 18mm to 20mm thick as in riser of step, dado and skirting over and including 10mm thick CM 1:4 backing coat on vertical surface of wall with rubbing and mirror polishing finished, rounding to edges of stone slab as in step, cooking platform and other similar situations, etc complete all as specified and as directed.

M&L for 18mm to 20 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including necessary polishing by using mechanical grinder and moulding edges complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block rubber moulded (glossy finish) of M-35 grade of approved shape, size and colour confrming to IS 15658-2006 including filling joints with sand over and including stone dust 30mm thick as a levelling course complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

S& F in repair Rotational moulded Polyethylene water storage tank 500 litres capacity (cylidrical vertical with closed top) of double layer hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed.

All as per item No 55 above but capacity 1000 litres complete all as specified and directed

Taking up or down 15mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

All as per item no 57 above but for 20mm bore complete all as specified and directed.

S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified and as directed.

All as per item no 59 above but for 20mm bore complete all as specified and as directed.

S&F in repair 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F in repair CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed .Make-Plumber/Essco of jaguar(Economical Range).

S&F in repair fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair CP wall mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed..Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair 125 mm size chromium plated shower rose with siwel joint and arm not less than 20cm long suitable for 15 mm bore GI pipes comlete all as directed..Make-Plumber/Essco of jaguar(Economical Range)

S& F in repair CP toilet paper holder complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repairs PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed. .Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair health faucet with flexible pipe of one metre length including wall hook for EWC complete all as specified and as directed..Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair vitreous china wash hand basin white flat backof size 550mm x 400mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed.

S & F in repairs vitreous china wash basin white (oval shaped under counter) of size 550mm x 400mm including 32mm brass CP waste coupling complete all as specified and as directed .

S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating including joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.

S&F in repair sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipe over all size 915x460 mm with bowl size 410x330x160 mm complete all as specified and as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F in repairs PVC waste pipe for urinal/wash basin/ sink of 32mm bore 65cm long complete all as specified and as directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets complete all as specified and directed.

S&F in repair of 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 142 gms) complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of approved colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete fixed with one corrugation side laps and minimum 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section in un-framed work complete all as specified and directed.

S&F MS steel Hollow Section work in tubular trusses purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade St-240 complete all as specified and as directed.

Preparation of new steel surfaces of any description over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed

S & F Anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified.

M&L for grinding and polishing the existing kota stone flooring complete all as specified and as directed

Excavation in post holes(or similar holes) each n exc 0.50 Cum getting out in soft/ loose soil ,returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm watering and removing surplus soil to a distance n.exc 50m and making good the surface complete

M&L mild steel work in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes conforming to IS 1161-1998 grade St-240

S& F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet .50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall ,fixed with self tapping screws as specified.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in filling and mass concrete

M&L for cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in coping, etc all as specified and direced

M&L for Cutting holes in brick walls built in cement mortar and making good dismantled portion with CM 1:3 or cement concrete 1:2:4 type B1 using 20mm graded stone aggregate n.exc one brick thick wall complete all as specified and as directed.

M&L for Roughening surface of chajja by picking, removing all loose mortar, sweeping clean and washing down with water to remove dust etc as directed and specified.

M&L for Cutting out crack to V section in existing roofs/chajjas cleaning out , wetting,grouting with cement and sand slurry 1:3

M & L for Brushing with neat cement slurry @ 3 Kg per Sqm area mixed with integral water proofing compound as specified and directed Note :- WPC shall be measured and paid separately under respective item.

M&L for PCC (1:2:4) type B0 using 12.5mm graded stone aggregate 25mm average thick in roof kerbs, coving etc complete all as specified and as directed.

M & L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green on roof and over cement slurry in chajjas, finished the surface even and smooth without using extra cement all as specified and directed Note (a) WPC shall be measured and paid separately under respective item. (b) : Rendering shall be carried out over RCC chajjas to a height 8m. The contractor shall quote his rate accordingly and rate deemed to include necessary scaffoding. No extra claim on account of this shall be paid later.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or other equivalent as approved.

Extra over rendering under item No 100 above for work in isolated width not forming part of general plastering such as drip moulds of roof /chajjas and similar works not exceeding 15 cm in width and girth complete all as specified and directed by Engr in Charge.

M&L for Preparing slab/chajja surfaces of any description and applying two coats of Terrashield over a coat of Terrashield primer on slab/Chajja surfaces all as per manufacturers instructions.Note : Work shall be excecuted through authorised applicator of original manufaturers

M&L for Preparing surfaces of walls of any description and applying two coats of Rainshield over a coat of Rainshield primer all as per manufacturers instructions. Note : Work shall be excecuted through authorised applicator of original manufaturers

M&L for Preparation of new plastered surfaces of wall and applying two coats of exterior weather proof water base emulsion paint white/coloured over a coat of oil base primer all as specified and directed.

M&L for Complete removal of existing treatment and applying two coats of exterior weather proof water base emulsion paint white/coloured over a coat of oil base primer all as specified and directed.

M&L for Preparing old decorated surfaces of walls of any description and applying one coat of exterior weather proof water base emulsion paint white/coloured all as specified and directed. Note : This item shall be executed at chajjas of building to a height upto 8m. Contractor shall quote his rate accordingly and deemed to include necessary scaffolding/ ladders as requried at site . Nothing extra shall be paid on this account later.

S & F Pre-painted galvalume aluminium zinc GI based plain steel sheet 0.50mm thick (ridge) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge.

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specified and directed

M&L for Point wiring in repairs with FR LS PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping shall be used) & 1.5 sqmm green FR LS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc for the following . :-

One light/ fan/ point controlled by one switch

One bell point controlled by one switch

One 5Amps socket out let point controlled by one switch on same board with other switches.

One 5Amps socket out let point on independent board controlled by one switch.

All as per item No 110 here in before but using FR LS PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green FR LS PVC insulated cable for 15 Amps socket point on independent board controlled by one switch.

Supply and fix in repairs Modular Switch flush type 6 Amps single pole, one way complete all as specified. Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 Pin combined 6 Amps flush type complete all as specified. Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

Supply and fix in repairs Modular Bell push flush type,6 Amps complete all as specified. Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket complete all as specified. Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

Supply and fix in repairs Modular Switch 16 Amps single pole, one way complete all as specified. Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

Supply & fix in repairs modular fan regulator 2 step type complete. Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

Supply and fix in repairs white finished single mounting modular plates suitable for modular accessories of following sizes Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series

Sutable for 1/2 modules

Sutable for 3 modules

Sutable for 4 modules

Sutable for 8 modules

Supply and fix in repairs sheet metal boxes concealed in wall suitable for housing modular accessories of following sizes Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

Sutable for 1 or 2 modules 50mm.

Sutable for 3 modules 50mm.

Sutable for 4 modules 50mm.

Sutable for 8 modules 50mm.

S&F in repairs ceiling rose surface bakelite three terminal complete all as directed

Supply and fix in repairs Bell, ding dong type, AC 230 Volts,single pole complete

Supply and fix in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or other equivalent in Wipro

Supply and fix in repairs integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square box complete all as specified and directed .Make:- Havells Cat No. LHEXBLP7IN1W009 Bajaj Cat Pt No. BCLSB 10 WH or other equivalent in Wipro

Supply and fix in repairs Wall light fittings suitable for LED bulb 9 watt with & including LED bulb of 7 watt, including connection with all necessary fixing accessories complete all as specified and directed Make :- Havells Cat No. LHFOECE1TZ1B014 or other equivalent in Bajaj, Philips.

Supply & fix in repairs LED Bulk Head luminaire 10W, 6000K pressure die cast housing with IP65 protection complete with electric connection all as specified and directed Make:- Havells Cat No. HEXAFT10LED857SSYMBOPC, Crompton Cat No. LBH-10-CDL, Bajaj Cat No. BIBWP 10W LED

Supply and fix in repairs LED street light fittings 1x25 /30 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified and directed .Make:- Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. ENXTP30LWHSYPCSD and other equivalent in Havells .

M&L for Sub main wiring in repairs with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of size not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed FR LS 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed.

Supply and fix in repairs double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din rail complete all as specified and directed .

Supply and fix in repairs double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed.

S & F in repairs MCB TPN 63 Amps 10 KA, 'C' series including connection with suitable size aluminium/copper lugs complete all as specified and directed

S & F in repairs MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

S&F in repairs MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

M & L for Earthing in repairs complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type C1 with 40 mm thick RCC 1:2:4 type B1 cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and directed.

Labour only for opening & refixing the celing fan/ Exhaust fan with replacement of unserviciable 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats of synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust and Fan Rod of appropriate length as required at site and complete all as specified and as directed

S & F for ceiling fans complete with electronic type regulator and accessories 230 Volts, 1200 mm sweep BEE 5 star rated compelte all as specified and directed.

Chitragupta Construction

SATHI ENTERPRISES

M/S UnitedConstruction