REPAIR TO MISC TYPES OF STEEL AND WOODEN FURNITURE FOR MD AND OTM ACCN UNDER GE AF ADM AREA AT AF STATION AGRA

Amount

REPAIR TO TABLE DINING OR`s SUNMICA TOP 2100 MM X 900 MM X 760 MM, Drg No. FD-165 (M) Removing of unserviceable top and S&F new top made of 18 mm thick pre-laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.

Taking down old unserviceable legs and S&F new leg made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Description all as per item No 02.00 here-in-before but long rail

Description all as per item No 02.00 here-in-before but short rail

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table dining OR's except top over and including a coat of wood filler wherever required & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO SOFA SET 4 SEATER/ 5 SEATER, Drg No. FD-281/ 373/ 258 Taking down old unserviceable front/ rear leg of sofa set 4 seater/ 5 seater and S&F new front/ rear leg made out of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Taking down old unserviceable side(left/ right) and front/ rear rail of sofa set single seater and S&F new side (left/ right) and front/ rear rail of sofa set single seater made out of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Taking down old unserviceable long rail ( front/rear) of sofa three seater and S&F of new long rails ( front/rear) of of sofa (three seater) made out of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Taking down old unserviceable battens of seat/ back of sofa single/ three seater and S&F new battens made out of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Taking down old unserviceable arms of sofa single/ three seater and S&F new arms made out of Ist class hard wood (teak) as per existing shape and size complete all as specified, shown on drawing and as directed.

Removing of existing unserviceable cushion from seat and back of sofa set 4 seater/ 5 seater and S&F new foam cushion 100 mm thick, 32 density duly covered with superior quality tapestry cloth all as specified and directed . NOTE: Cost of Tapestry cloth shall not be less than Rs 350/- per meter. Make of foam: Primo/Coolgel of Sleepwell or Goldline Plus of Curlon.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of sofa chair over and including a coat of wood filler wherever required & tightening of all loose componentscomlpete all as specified and as directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of sofa set 03 seater over and including a coat of wood filler wherever required & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO LOCKER BED SIDE WOODEN, Drg No FD-54 Removing of existing unserviceable shutter and S&F 18 mm thick particle board, BWR grade, commercial type with 4 mm thick teak wood beading on three sides of shutter all as specified and directed.

Removing of existing unserviceable back and S&F new ply wood back of 6 mm thick BWR grade, commercial type all as specified and directed.

Removing of existing unserviceable top and S&F new top of 18 mm thick particle board, BWR grade, commercial type with 4 mm thick teakwood beading all around all as specified and directed.

Removing of existing unserviceable shelves and S&F new shelves made of 18mm thick particle board, BWR grade, commercial type with 4mm teak wood beading throughout finished complete all as specified and directed.

Removing of existing unserviceable partition wall and S&F new partition wall of 18mm thick particle board, BWR grade, commercial type complete all as specified and directed.

Removing of existing unserviceable legs and S&F new legs made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Taking down existing unserviceable hinges and S&F new 18mm wide piano type hinges of mild steel chromium plated ISI marked with required size of SS screws all as specified and directed.

Taking down existing unserviceable handle and S&F new aluminium anodized 100 mm long handle ISI marked with required size of SS screws all as specified and directed.

Taking down existing unserviceable hasp and staple and S&F new hasp and staple aluminum anodized 75 mm long ISI marked with required size of SS screws all as specified and directed.

M&L for painting with two coats of synthetic enamel paint with one coat of pink primer on new components & one coat of synthetic enamel paint on old surfaces of locker bed side wooden complete internally and externally except bottom including preparation of old/ new surfaces all as specified & directed.

REPAIR TO TABLE WRITING MED/ JCOs/ SMALL, Drg No. FD-249, 275 Taking down old U/S table top and S&F new table top of pre-laminated particle board one side decorative 18 mm thick exterior grade as per existing shape and size including 4 mm thick teak wood beading all around including polishing with high class French polish complete all as specified and shown on drawing .

Removing of old unserviceable legs and S&F new leg made of 1st class seasoned hard wood (teak) as per shape and size complete all as specified and shown on drawing .

Taking down old U/S shutter and S&F new shutter of pre-laminated particle board one side decorative 18 mm thick exterior grade as per existing shape and size including 4 mm thick teak wood beading on three sides including polishing with high class French polish complete all as specified and shown on drawing.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table writing inside and outside legs except top and bottom over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO HAT STAND WITH MIRROR, Drg No. FD-233, 361, 362 & 1110 Taking down old unserviceable peg of hat stand and S&F new aluminium peg of existing shape and size, fixed with required size brass screws complete all as specified and directed.

Taking down old unserviceable mirror of hat stand and S&F new mirror 5mm thick as per existing shape and size including beading and 6 mm thick ply wood back complete all as specified and directed. Make : Saint Gobain/ Modi Guard / Swastik/ Atul

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to all old and new exposed surfaces of hat stand with mirror over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO TEAPOY VERANDAH (MAP), Drg No. FD/ E6/ MAP/ 17 Removing of unserviceable top and S&F new top made of 18 mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick TW beading all-round the teapoy verandah.

Removing of old unserviceable square MS pipe and S&F 18 mm square MS pipe of heavy quality duly painted with two coats of synthetic enamel white paint over a coat of red oxide primer complete all as specified as directed.

Removing of old existing unserviceable MS rod and supply & fixing new MS bar 5mm dia bar in base tray as per existing size and welded to tray complete all as specified and directed.

Removal of U/S shoe and S&F hard rubber shoe of superior quality as per existing shape and size for teapoy verandah all as directed.

M&L for painting with one coat of synthetic enamel black paint including preparation of surfaces of teapoy verandah complete all as specified and directed.

REPAIR TO TABLE DRESSING GENTS (MAP), Drg No. FD/ E6/ MAP/ 16 Removal of old unserviceable existing back ply of looking mirror and S&F new back ply wood 1200 mm x 600 mm, 12mm thick, teak face plywood BWR grade complete all as specified and shown on drawing .

Taking down old broken mirror and S&F new looking mirror of size 1190 mm x 590 mm x 5.5 mm thick as approved. Make : Saint Gobain/ Modi Guard / Swastik/ Atul

Taking down old broken glass shelves with S&F new glass shelves 5.5 mm thick supproted on runner/ glass holder as per existing size as specified and directed.

Taking down old U/S teak wood frame and S&F new teak wood frame of existing size for mirror made to shape as per existing size and as directed.

Taking down old U/S side and S&F new sides of 18 mm thick pre-laminated particle board exterior grade ISI Marked, teak finish on one side and other side white complete all as shown on drg and as directed.

Removal of old unserviceable leg and S&F new leg made of 1st class seasoned hard wood (teak) as per shape and size complete all as specified and shown on drawing .

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table dressing gents over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR SHOE RACK STEEL SIZE 880 MM X 845 MM X 300 MM, Drg No. FD/ E6/ MAP/ 02 Removing old worn out 3mm dia MS rod and S&F new MS rod 3mm dia in horizontal spacing as existing shape and size as directed.

Removing old worn out 3mm dia MS rod and S&F new MS rod 3mm dia in vertical spacing as existing shape and size as directed.

Taking down old MS pipe and S&F new MS pipe 25 mm dia having 1.60 mm wall thickness, fixed with gas welding as per existing shape and specified shown on drg and directed.

Removing old worn out shoe and S&F new hard rubber shoe of best quality complete all as shown on drg and as directed.

M&L for painting with one coat of synthetic enamel black paint including preparation of surfaces of shoe rack steel complete all as specified and directed.

REPAIR TO TEAPOY VERANDAH, Drg No. FD-1118 & 35 (M) Removing of unserviceabletop and S&F new top made of 18 mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick TW beading all-round the teapoy verandah.

Removing of old unserviceable conduit pipe and S&F of 18/19 mm dia having 1.60 mm wall thickness, fixed with gas welding including two coats of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

Removing of old existing unserviceable side strip & S&F of new side strip made of 25 mm x 3 mm flat iron mild steel, including making hole complete all as specified and directed.

Removing of old existing unserviceable long strip & S&F of new long strip made of 25 mm x 3 mm flat iron mild steel, including making hole complete all as specified and directed.

Removing old worn out shoe and S&F new hard rubber shoe of best quality complete all as shown on drg and as directed.

M&L for painting with one coat of synthetic enamel black paint including preparation of surfaces of teapoy verandah complete all as specified and directed.

REPAIR TO TABLE DRESSING LADIES, Drg No. FD-251, 32, 378 Dismantling/ taking out carefully old existing broken top of table dressing and S&F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white all as shown on drawing, specified and directed.

Description all as per item No 54.00 here-in-before but Side of table dressing ladies

Replacement of slide glass 5.00 mm thick shutter with approved aluminium channel complete all as shown on drawing, specified and as directed .

Taking down existing bottom and S&F new bottom made of 12mm thick plywood, BWR grade, commercial type complete all as directed.

Taking down old broken mirror and S&F new looking mirror of size 365 mm x 1220 mm x 5 mm thick all as specified and directed. Make : Saint Gobain/ Modi Guard / Swastik/ Atul

Replacement of back frame with S&F new back frame of 6mm commercial plywood, BWR grade and connected components made out of 45 mm x 40mm 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Replacement of chromium plated knob 25 mm dia, best quality and as approved by Engr-in-Charge.

Replacement of 12mm thick 900 mm x 380 mm commercial back plywood, BWR grade fixed with screws and nail all specified and as directed.

Taking out old drawer and S&F new drawer with base of 6 mm thick ply, sides and back made of 12 mm thick plywood both commercial type, BWR grade and front made of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white as per shape and size compelete all as specified and shown on drawing .

Taking down old unserviceable legs and S&F new leg made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Description all as per item No 63.00 here-in-before but long rail to leg

Description all as per item No 63.00 here-in-before but short rail to leg

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table dressing ladies over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIRS TO TABLE DRESSING GENTS, Drg No. FD-230, 379, 394 Dismantling/ taking out carefully old existing broken top of table and S&F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white all as shown on drawing, specified and directed.

Description all as per item No 67.00 here-in-before but bottom

Description all as per item No 67.00 here-in-before but side (left/right)

Taking down existing back and S&F new back made of 12mm thick commercial plywood, BWR grade of size 900 mm x 380 mm fixed with screws complete all specified and as directed.

Taking out old drawer and S&F new drawer with base of 6 mm thick ply, sides and back made of 12 mm thick plywood both commercial type, BWR grade and front made of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white as per shape and size compelete all as specified and shown on drawing .

Replacement of chromium plated knob 25 mm dia, best quality and as approved by Engr-in-Charge.

Taking down old broken mirror and S&F new looking mirror of size 380 mm x 160 mm x 5 mm thick all as specified and directed. Make : Saint Gobain/ Modi Guard / Swastik/ Atul

Taking down old U/S back frame and S&F new back frame of mirror made of 6mm commercial plywood, BWR grade as per shape and size compelete all as specified and shown on drawing .

Replacement of hanging key plate of mirror frame/ rectangular box and S&F new hanging key plate all as specified and shown on drg.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table dressing gents over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO SIDE BOARD, Drg No. FD-261 Taking out carefully old existing broken top and S&F new top made of 18 mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick TW beading all-round all as shown on drawing, specified and directed.

Taking down existing back and S&F new back made of 6 mm thick commercial plywood, BWR grade fixed with screws complete all specified and as directed.

Taking down old unserviceable legs and S&F new leg made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Description all as per item No 79.00 here-in-before but bottom long rail

Description all as per item No 79.00 here-in-before but short rail

Taking out carefully old existing broken side and S&F new side made of 18 mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white all as shown on drawing, specified and directed.

Description all as per item No 82.00 here-in-before but partition

Description all as per item No 82.00 here-in-before but shelf

Taking out carefully old existing broken shutter and S&F new shutter made of 18 mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick TW beading on three sides all as shown on drawing, specified and directed.

Taking out old drawer and S&F new drawer with base of 6 mm thick ply, sides and back made of 12 mm thick plywood both commercial type, BWR grade and front made of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white as per shape and size compelete all as specified and shown on drawing .

Replacement of chromium plated knob 35/ 40mm dia, best quality and as approved by Engr-in-Charge.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of side board except bottom over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR/ REWEAVING OF CHARPOY GI PIPE, Drg No. FD-220 (M) Dismantling / taking down of existing unserviceable newar from GI pipe charpoy and weaving both ways with superior quality of nylon newar 50 mm to 55mm wide ( weight not less than 1.50 Kg per charpoy) including tightening of all components of charpoy in the true position complete all as specified and and shown on drg.

Removing of old unserviceable check nut of G.I. charpoy and replacement with new GI Check nut, 9mm thick suitable for charpoy GI Pipe 32 mm bore pipe complete all as specified & directed.

Removing of old unserviceable elbow of charpoy GI pipe and S&F three way GI elbow 32 mm bore medium grade, ISI marked complete all as specified & directed.

M&L for two coats of synthetic enamel black paint on iron components (clamps etc.) including preparation of surface after tightning of all loose components complete all as specified and directed.

REPAIR TO TABLE 3' X 2', Drg No. FD-223 Removing of unserviceable top and S&F new top of 18 mm thick pre-laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.

M&L for repair and tightening of all loose components of table complete all as specified and directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO TABLE BED SIDE, Drg No. FD- 248 & 276 Taking out carefully old existing broken top and S&F new top made of 18 mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick TW beading all-round all as shown on drawing, specified and directed.

Taking out carefully old existing broken side and S&F new side made of 18 mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white all as shown on drawing, specified and directed.

Description all as per item No.97.00 here-in-before but shelf .

Taking down existing back and S&F new back made of 6 mm thick commercial plywood, BWR grade fixed with screws complete all specified and as directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table bed side except top over and including a coat of wood filler comlpete all as specified and as directed.

REPAIR TO TABLE 1520 x 860 x 760 mm, Drg No. FD-139, 289 Removing of unserviceable top and S&F new top of 18 mm thick pre- laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.

M&L for repair and tightening of all loose components of table complete all as specified and directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table bed side except top over and including a coat of wood filler comlpete all as specified and as directed.

REPAIR TO TABLE BED SIDE DRG No : FD/E6/MAP/15 : Taking out old unservicable top and S&F Top of table bed side made of 18 mm thick pre-laminated particle board exterior grade ISI Marked one side teak colour and other side white complete all as specified and shown on drawing.

Description all as per item No 104.00 here-in-before but bottom

Description all as per item No 104.00 here-in-before but side

Taking down old unserviceable back and S&F new 6 mm thick, ply wood, BWR grade, commercial type of required size made to shape & size as per drawing complete all as specified & directed.

Taking out U/S upper drawer and S/F drawer made of 18 mm thick pre-laminated particle board exterior grade ISI Marked one side teak colour and other side white and bottom of drawer shall be 6 mm thick, plywood, BWR grade commercial type with and all as specified and as shown on drg.

Description all as per item No 108.00 here-in-before but lower drawer

Taking down U/S handle and S/F handle chromium plated as per shape exists all as complete as specified.

Removing old u/s telescopic channel of pull out tray and S&F new telescopic channel as per existing size and as directed.

Removing of old unserviceable square MS pipe leg and S&F 18 mm square MS pipe leg of heavy quality duly painted with two coats of synthetic enamel white paint over a coat of red oxide primer complete all as specified as directed.

M&L for painting with one coat of synthetic enamel black paint including preparation of surfaces of table bed side complete all as specified and directed.

REPAIR TO RACK STEEL SLOTTED 15 FEET HIGH (MULTIPEX TWO TIER SYSTEM WITH STAIR CASE), TP M&L for preparation of existing steel surfaces of rack steel and painting with two coats of synthetic enamel paint using spray gun including all accessories/ fitments including tightning of loose compenents complete all as specified and directed.

REPAIR TO TABLE 900MM x 600MM WITH DRAWER AND W/O DRAWER, Drg No. FD-41, 55, 224, 209, 231, 283, 284 Removing of unserviceable top and S&F new top made of 18 mm thick pre- laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.

Taking down old unserviceable legs and S&F new leg made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Description all as per item No 116.00 here-in-before but replacement of wooden front/ rear long rails .

Description all as per item No 116.00 here-in-before but replacement of wooden side rails (left/ right).

Description all as per item No 116.00 here-in-before but replacement of drawer components.

Description all as per item No 116.00 here-in-before but replacement of centre stiffener.

Description all as per item No 116.00 here-in-before but replacement of side stiffener.

Replacement of chromium plated knob 25 mm dia, best quality and as approved by Engr-in-Charge.

Removing old unserviceable nylone buffer supply and fixing new nylone buffer as per existing shape and size/ as directed.

M& L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table 900 mm x 600 mm with or without drawer except top over and including a coat of wood filler comlpete all as specified and as directed.

REPAIR TO TABLE 900MM x 900MM WOODEN, Drg No. FD-291, 273 Removing of unserviceable top and S&F new top made of 18 mm thick pre- laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.

Taking down old unserviceable legs and S&F new leg made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Description all as per item No 126.00 here-in-before but replacement of wooden front/ rear long rails .

Description all as per item No 126.00 here-in-before but replacement of wooden side rail (left/ right).

Description all as per item No 126.00 here-in-before but replacement of centre stiffener.

Description all as per item No 126.00 here-in-before but replacement of side stiffener.

Removing old unserviceable nylone buffer supply and fixing new nylone buffer as per existing shape and size/ as directed.

M& L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table 900 mm x 900 mm wooden except top over and including a coat of wood filler comlpete all as specified and as directed.

REPAIR TO TABLE WRITING, Drg No. FD-33 (M)/ 249, 275 Removing of unserviceable top and S&F new top made of 18 mm thick pre- laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.

Taking down old unserviceable legs and S&F new leg made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Description all as per item No 134.00 here-in-before but replacement of wooden front/ rear rail.

Description all as per item No 134.00 here-in-before but replacement of wooden front/rear side rail.

Removing of unserviceable cabinet component (left/ right/ top/ bottom/ partition) and S&F new component made of 18 mm thick pre- laminated particle board exterior grade, ISI marked, teak finish on one side and other side white complete all as specified, directed and as shown on drg.

Taking down old unserviceable back and S&F new 6 mm thick, ply wood, BWR grade, commercial type of required size made to shape & size as per drawing, complete all as specified & directed.

Removing of unserviceable shutter and S&F new shutter made of 18 mm thick pre- laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading on three sides complete all as specified, directed and as shown on drg.

Replacement of chromium plated knob 25 mm dia, best quality and as approved by Engr-in-Charge.

M& L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table writing except top over and including a coat of wood filler comlpete all as specified and as directed.

REPAIR TO CHAIR DINING, DRG NO. FD-228, 250, 279, MAP-II/05 Taking down old existing unserviceable/ broken wooden rear leg (left or right) of chair dining & S&F in position new rear leg made out of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Description all as per item No 142.00 here-in-before but front leg (left or right).

Description all as per item No. 142.00 here-in-before but replacement of rails (left / right or front / back) including making holes for weaving to match with existing surface complete all as specified and directed.

Description all as per item No. 142.00 here-in-before but replacement of stiffener.

Description all as per item No. 142.00 here-in-before but replacement of back rest.

Taking down old U/S nylon buffer and S&F new nylon buffer of superior quality tightend with steel screws of suitable size.

Taking down old unsv canning and re-canning of chair dining Godrej pattern with 2 mm wide half round new plastic cane of superior quality all as specified and shown on drawing.

M&L for two or more coats of french polishing to all exposed surface of all type of chair dining with high class french polish and matching the new components with old surfaces complete all as specified and directed.

REPAIR TO CHAIR VERANDAH, DRG NO. D-256/ 259/ 359/ 333/ MAP Drg Taking down old unserviceable nylon newar and reweaving of chair verandah as per mat pattern with 25 mm wide nylon newar of superior quality complete all as specified and directed.

Taking down old unserviceable circular conduit pipe and S&F new mild steel conduit pipe of 18/19 mm dia having 1.60 mm wall thickness, fixed with gas welding duly painted with two coats of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

Taking down old unserviceable canning and re-canning of chair verandah in Godrej pattern with 4 mm wide half round new plastic cane of superior quality complete all as specified and shown on drawing.

Removing of unserviceable PVC shoes and S&F new PVC shoes of chair of superior quality complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint of white shade over all exposed sufaces of chair verandah after preparation of surfaces including jointing of broken part of chair verandah through gas welding with full joint complete all as specified and directed.

REPAIR TO CHAIR EASY WITH CUSHION, Drg No. FD- 229/ 358 Taking down old existing unserviceable/ broken wooden rear leg (left or right) of chair easy & S&F in position new rear leg made out of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Description all as per item No 155.00 here-in-before but front leg (left or right).

Description all as per item No. 155.00 here-in-before but replacement of rails (left / right or front / back) including making holes for weaving to match with existing surface complete all as specified and directed.

Description all as per item No 155.00 here-in-before but replacement of side rails (front,rear & left/ right ) for back rest

Description all as per item No 155.00 here-in-before but replacement of top / bottom rail in between of rear legs .

Description all as per item No 155.00 here-in-before but replacement of front support rail.

Description all as per item No 155.00 here-in-before but replacement of arms rest.

Taking down old U/S nylon buffer and S&F new nylon buffer of superior quality tightend with steel screws of suitable size.

Taking down old unsv canning and re-canning of chair easy seat and back Godrej pattern with 2 mm wide half round new plastic cane of superior quality all as specified and shown on drawing.

M&L for two or more coats of french polishing to all exposed surface of all type of chair easy with high class french polish and matching the new components with old surfaces complete all as specified and directed.

REPAIR TO CHAIR WRITING/ CBA Drg No. FD-228, 202, 207, 261, 280 Taking down old existing unserviceable/ broken wooden rear leg (left or right) of chair writing & S&F in position new rear leg made out of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .

Description all as per item No 165.00 here-in-before but front leg (left or right).

Description all as per item No. 165.00 here-in-before but replacement of rails (left / right or front / back) including making holes for weaving to match with existing surface complete all as specified and directed.

Description all as per item No 165.00 here-in-before but replacement of back strip with new back strip complete all as shown on drg and directed.

Description all as per item No 165.00 here-in-before but replacement of arm rest complete all as shown on drg and as directed.

Description all as per item No 165.00 here-in-before but replacement of stiffener complete all as shown on drg and as directed.

Taking down old U/S nylon buffer and S&F new nylon buffer of superior quality tightend with steel screws of suitable size.

Taking down old unsv canning and re-canning of chair writing Godrej pattern with 2 mm wide half round new plastic cane of superior quality all as specified and shown on drawing.

M&L for two or more coats of french polishing to all exposed surface of all type of chair writing with high class french polish and matching the new components with old surfaces complete all as specified and directed.

TUCK WELDING : M&L for jointing of broken part of steel furniture items as and where required through welding all as specified and directed.

Anand Construction

GUJRAL BUILDERS

R K SINGH AND CO

M/S MAKHIJA TRADERS

M/s Laxmi Associate

SOHAMM ENGINEERS