Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹42,000
Closing Date
11 Nov 2023, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
N Roopa Jain
Tender for Design, Manufacture, Testing and Supply of 05 Nos of 66KV SF6 Circuit Breakers required for various Sub-Stations of TL&SS Division KPTCL, Hootagally coming under Mysuru Transmission Zone.
KPTCL/2023-24/IND0013
KPTCL/2023-24/IND0013
Open
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Mysuru
3 documents required · 0 mandatory · 3 optional
The tenderer should be a manufacturer who must have manufactured, tested and supplied the equipment (s) similar to the type specified in the ‘Schedule of Requirements’ up to at least xxxx % of the quantity required in any one of the last 3 years. The equipments offered for supply must be of the most recent series models incorporating the latest improvements in design. The models should have been released on or after xxxxx and be in satisfactory operation for xxxxx months as on date of tender opening. Certificates to be provided as per Section XII of Tender Document.
In case of authorized representative/dealer of a manufacturer - The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per General Conditions of Contract and Special Conditions of Contract. Manufacturers Authorization Form to be provided as per Section XIII of Tender Document.
In case of authorized representative/dealer of a manufacturer - The tenderer, as authorized representative/dealer , has supplied, installed and commissioned satisfactorily at least xxxxx % of the quantity similar to the type specified in the Schedule of Requirements in any one of the last three years which must be in satisfactory operation for at least xxxxx months on the date of tender opening. Certificates to be provided as per Section XII of Tender Document.
The legal status, place of registration and principal place of business of the company or firm or partnership.
Details of experience and past performance of the tenderer on equipment offered and on those of similar nature within the past three/five years2 and details of current contracts in hand and other commitments.
A detailed description of the essential technical and performance characteristics of the goods.
A list giving full particulars, including available sources and current prices, of spare parts, special tools, etc., necessary for the proper and continuing functioning of the goods for a period of two years, following commencement of the use of the goods by the Purchaser.
b)The Bidder shall be a manufacturer and should have a minimum experience of 5 years in designing, manufacturing, testing & supply of Circuit breakers (Bidders have to furnish the supporting Documents such as purchase order copies/order completion certificates/performance certificates).
c)The bidder should have manufactured and supplied at least 50% of the tendered quantity (i.e for 03 Nos) of 66KV or higher voltage class SF6 circuit breakers to any State/Central owned Electricity utilities / Generating utilities only.
d)The Bidder shall furnish the performance certificates for atleast 50% of the tendered quantity (i.e, 03 Nos) of 66KV or higher voltage class SF6 circuit breakers. The performance certificates of Circuit breakers shall pertain only to the circuit breakers commissioned in State/Central owned Electricity utilities / Generating utilities only, and issuing officer shall not be below the rank of Executive Engineer or equivalent division head. The performance certificate shall indicate the rating of the Circuit breakers in terms of capacity, make, voltage and name of the sub-station where it is installed, date of commissioning etc., in order to show that tendered materials of this bid was in successful operation for at least a minimum period of two years as on the date of bid opening.
e)The Bidder shall furnish Type Test Certificate not older than 07 years as on the date of bid opening for having conducted successful type test at a CPRI or as mentioned in NIT accredited laboratories (The seismic withstand test conducted at IITs or IISc will be accepted) on 66KV Circuit breakers or higher voltage class similar to the type specified in the bid. In case the type test report for the specified rating in Bid is older than 07 years accredited laboratory the bidder shall give an undertaking agreeing to conduct all type tests on the 1st unit or any other unit at the discretion of KPTCL at CPRI as mentioned in NIT accredited laboratories. The seismic withstand test conducted conducted at IITs or IISc will be accepted if order is placed on the firm without affecting the Delivery Schedule and at no extra cost to KPTCL in the following cases
If the Type test reports are older than 7 years. If anyone/some of the test reports mentioned below in Note 1 are not available. It is reiterated that Submission of type test certificates at least for five type tests mentioned in note 1 is mandatory for evaluation of the bid.
List of type tests for 66kV SF6 Circuit breakers as per IEC62271100 latest version.Short circuit current making and breaking tests including terminal fault tests Cl No.6.102 to 106 of IEC62271100Basic short circuit duties-Cl.No.6.106.Short line fault tests Cl. No.6.109of IEC62271100. Capacitive current switching tests Cl.No.6.111 of IEC62271100. Small inductive current tests. Short time with stand current & peak withstand current testsCl.No.6.6 of IEC62271.100 Mechanical endurance tests. Dry power frequency test. Wet power frequency test. Lightning impulse test. Temperature rise test.Corona extinction voltage test. Out of phase closing test as per IEC267 and IEC62271100 Line charging breaking current test as per IEC62271100 Cable charging breaking current as perIEC6227100.Seismic withstand test in unpressurized condition.
Note 2 KPTCL may conduct Type Tests as per relevant ISIEC at its cost on a random sample of 66KV SF6circuit breaker at any point of time during the contract at CPRI Laboratory. However the successful bidder shall have to bear the transportation cost & Insurance. The bidder shall have to give an undertaking to this effect.
f)Financial Capability corresponding to bidders highest Annual Turnover of the best one year during 2015-16, 2016-17 and 2017-18 (If available 2018-19) shall not be less than 187.3lakhs. The bidder shall upload audited annual financial statements such as Profit & Loss statements, Balance sheets for the above 3 years duly certified by a Chartered Accountant.
a)The bidder should have Goods and Services Tax (GST) registration and shall upload the necessary supporting document to establish compliance for having GST registration.
g)In case the information furnished by the Bidder/Bidders is found to be false at any stage of tendering /execution, then KPTCL, at its discretion may take action against such Bidder/Bidders. If false information is found at the Tendering stage, KPTCL may forfeit the EMD paid, disqualify the offer of such Bidder and /or Black list the Firm. If false information is found at execution stage then KPTCL may cancel the order, forfeit the Bank Guarantee furnished against the performance of the contract, Black list the Firm and recover excess money paid by KPTCL (if any).
If part or full price sheets or prices are exposed in the TechnoCommercial Sheets or TechnoCommercial Bid of the Bidder then the offer of the Bidder will be rejected. The performance of the equipments supplied by the bidder in the past would also be reckoned for considering the offers. The offer of the bidders taking deviations in following clauses will be summarily rejected. Validity of offer. Earnest Money Deposit.Contract performance security. Payment terms. Guarantee. Penalty. Stipulated Delivery Schedule.Price Basis.Type test Change in offered quantity against tendered quantity.
The Bidder shall furnish the power of attorney on the e-stamp paper of Rs.200 in the prescribed format which is uploaded along with the tender documents on the date of bid opening. Further the same shall be sent in original to the Office Chief Engineer Ele.Transmission Zone KPTCL Mysuru on or before the date and time of opening of techno-commercial bid.
lThe bidder should not have been blacklisted by any State/Central Generating/Transmission/ Utility as on the date of bid submission. The bidder shall upload a declaration in this regard and non-furnishing of the declaration will result in rejection of the Bid.
m)The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years with KPTCL. A history of awards involving litigations against the bidder or any part or JV may result in rejection of bid.
n)Bidders should furnish the self declaration stating the above and upload the same along with the other documents in the relevant field in the e-procurement portal, failing which the offer is liable to be rejected.
A certificate is required to be submitted/uploaded by both Bidder and Consortium Partners separately regarding restriction on procurement from a Bidder/Consortium Partner of a country which shares a land border with India in the format as specified in the clause No.1.5 of Annexure - XVIII of the Tender document.
o)A certificate is required to be submitted/uploaded by both Bidder and Consortium Partners separately in respect of restriction on procurement from a Bidder/Consortium Partner of a country which shares a land border with India in case of sub-contracting in the format as specified in the clause No.1.6 of Annexure - XVIII of the Tender document.
Documentary evidence wherever required shall be uploaded. No hard copies will be accepted except Power of Attorney as stated above. Notwithstanding anything stated above, KPTCL reserves the right to assess the bidders capability to perform the work, should the circumstances warrant such assessment in the overall interest of KPTCL.
₹500
₹42,000
20 Oct 2023
20 Oct 2023
13 Nov 2023
3 Nov 2023
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT - breaker.docx
Others - NIT • 0.11 MB
SCC.docx
Others - SSC • 0.03 MB
IFB.DOC
Others - INVITATION FOR BIDS • 0.07 MB
Power of Attorney.doc
Others - POA • 0.03 MB
Techno commercial sheets.xls
Techno-Commercial Worksheet • 0.16 MB
TECHNICAL SPECIFICATION 66kV.docx
Others - Specification • 0.10 MB
ITB.DOC
Instructions to Tenderers • 0.12 MB
mandatory documents to be submitted.docx
Others - Mandatory Documents • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .