REPAIR TO SEWAGE LINE, CLEANING TO SEWAGE LINE, SEPTIC TANK, MANHOLES AND REPAIR TO INTERNAL WATER SUPPLY AT VARIOUS UNITS IN ZONE-II UNDER GE (A) JAISALMER

Amount

Cleaning of septic tank, man holes and inspection chamber etc. by means of removing the silt, sludge, etc. or other materials, manually or mechanically and depositing the same, where directed at a distance not exceeding 150m including excavation of pits of required size to accommodate the foul materials taken out from septic tank, manholes, soakage pits and covering of the same with soil, not less than 30cm thick layer and making good all excavated site as required and as directed by Engineer-in-Charge. Note for item No. 1.00 :- (i) Depth of silt, sludge, excreta, etc shall only be measured and paid. (ii) Dewatering/pumping out of foul water shall be measured and paid separately.

Pumping out foul water from soakage wells / septic Tank mechanically and removing loose sludge etc complete all as directed by Engr-in-Charge of following capacity. (a) 10 Users

(b) 20 Users

(c) 50 Users

(d) 100 Users

(e) 250 Users

Cleaning of choked sewage line 100 mm bore by mechanically and well flushing with water, taking out waste materials any quantity and depositing where directed including covering the same with at least 30cm thick layer of soil all as directed by Engineer-in-Charge.( Note: choked Sewage line should be cleaned mechanically, Not by using rodding or bamboo strips)

-Ditto- All as per Sl item No 3 above, but 150 mm bore sewage line

-Ditto- All as per Sl item No 3 above, but 200 mm bore sewage line

-Ditto- All as per Sl item No 3 above, but 250-300 mm bore sewage line

-Ditto- All as per Sl item No 3 above, but exceeding 300mm bore and upto 600 mm bore sewage line.

Note for item No. 3.00 to7.00:- T&P or other machinery required for cleaning or dewatering are deemed to be included in the quoted rate of the respective items as in septic tank, soakage well, manhole, sewage line etc.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & directed by Engineer-in-Charge

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3.00m depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in soft/ disintegrated rock all as specified & directed by Engineer-in-Charge

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3.00m depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft/ disintegrated rock all as specified & directed by Engineer-in-Charge.

Cutting into existing manhole for connecting new drain pipes of 150mm bore , making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ rounded or ¾ section) in cement concrete 1:2:4 type B-1, smooth finished and forming benching as required complete all as specified & directed by Engineer-in-Charge.

Excavating over areas, n exc 1.5m deep and getting out in any type of soil complete all as specified & directed by Engineer-in-Charge.

-Ditto- All as per Sl item No. 13 above, but depth exc 1.5 m and n exc 3.0 m complete all as specified & directed by Engineer-in-Charge.

M&L for loose filling with broken stone or boulders of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock all as specified & directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed.

Removing excavated soft/disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed & specified.

Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation/ filling and mass concrete complete all as specified & directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channels or drains and benching incl finishing the top of benching even & smooth using extra cement (forming fair finished channel shall be measured and paid separately) complete all as specified & directed by Engineer-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds mitred/stopped ends etc complete all as specified & directed by Engineer-in-Charge.

Supply only integral water proofing compound in sealed pack (ISI marked) complete all as specified & directed by Engineer-in-Charge.

Demolition of stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except Stone complete all as specified & directed by Engineer-in-charge.

M&L for Squared rubble walling Jodhpur type, laid dry, brought to course and well bonded ccomplete all as specified & directed by Engineer-in-charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type brought upto courses complete all as specified & directed by Engineer-in-charge.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping incuding necessary form work, weathering slightly rounded or chamfered angle and throating complete all as specified & directed by Engineer-in-charge.

M&L for rendering 15 mm thick on stone masonry surface in cement mortar 1:4 mixed with water proofing compound at the rate of 3% by weight of cement and finished even & smooth without using extra cement (Supply only water proofing compound shall be measured and paid separately).

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not other wise specifically provided and removal unserviceable materials, debris and rubbish complete all as specified & directed by Engineer-in-charge.

M&L for precast reinforced cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 all as specified & directed by Engineer-in-charge.

M&L for mild steel TMT bars 6 mm to 8mm dia., cut to length, bent to shape required, including cranking bending etc and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia confirming to IS all as specified & directed by Engineer-in-charge.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) of 150mm internal dia pipe set in cement mortar all as specified & directed by Engineer-in-charge.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) of 200mm internal dia pipe set in cement mortar all as specified & directed by Engineer-in-charge.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm bore pipe all as specified & directed by Engineer-in-charge.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 200mm bore pipe all as specified & directed by Engineer-in-charge.

M&L for 150mm internal dia pipe SGSW drain pipes of grade `A’ (ISI marked) laid in trenches and jointed in CM 1:1 and tested complete all as specified & directed by Engineer-in-charge.

M&L for 200mm internal dia pipe SGSW drain pipes of grade `A’ (ISI marked) laid in trenches and jointed in CM 1:1 and tested complete all as specified & directed by Engineer-in-charge.

S&F RCC pipe, class NP-2 ISI marked laid to slope in trenches jointed and tested complete with collars for 150 mm bore pipe complete all as specified & directed by Engineer-in-charge.

S&F RCC pipe, class NP-2 ISI marked laid to slope in trenches jointed and tested complete with collars for 200 mm bore pipe complete all as specified & directed by Engineer-in-charge.

Cleaning of manholes not exceeding 1.5m deep by means of removing the silt, sludge, etc & bailing out foul water complete manually or mechanically and removing the same out side MD land complete and making good all as directed by Engineer-in-Charge.

Cleaning of manholes exceeding 1.5m but not exceeding 3m depth by means of removing the silt, sludge, etc & bailing out foul water complete manually or mechanically and removing the same out side MD land complete and making good all as directed by Engineer-in-Charge.

Note for item No. 43 and 44.00:- T&P or other machinery required for cleaning or dewatering are deemed to be included in the quoted rate of the respective items as in septic tank, soakage well, manhole, sewage line etc.

Cleaning of floor trap in any size means of removing the silt, sludge & cleaning of gully trap if required etc & bailing out water up to 1st manhole chamber complete manually or mechanically and removing the same out side MD land all as directed by Engineer-in-Charge.

Cleaning of gully trap in any size means of removing the silt, sludge up to 1st manhole chamber complete manually or mechanically and removing the same out side MD land all as directed by Engineer-in-Charge.

Opening of blockage of WC, EWC in any floor means of removing the silt, sludge, & cleaning of gully trap if required etc & bailing out water upto 1st manhole chamber complete manually or mechanically and removing the same out side MD land all as directed by Engineer-in-Charge.

Opening of blockage of urinal in any floor means of removing the silt, sludge, etc & bailing out water up to 1st manhole chamber complete manually or mechanically and removing the same out side MD land all as directed by Engineer-in-Charge.

Opening of blockage of WHB in any floor means of removing the silt, sludge,& cleaning of gully trap if required etc & bailing out water up to 1st manhole chamber complete manually or mechanically and removing the same out side MD land complete aall as directed by Engineer-in-Charge.

S & F in repairs 100 mm bore Cast Iron Sand cast pipes, Soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified & directed by Engineer-in-charge.

S & F in repairs 75 mm bore Cast Iron Sand cast pipes, Soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified & directed by Engineer-in-charge.

S&F in repairs cast iron cowls 100 mm dia complete all as specified & directed by Engineer-in-charge.

Dismantling stone slabs in roofs, suspended floors, chajjas, landings, etc any thickness, jointed in any mortar complete all as specified & directed by Engineer-in-charge.

M&L for Jodhpur stone roof slabs, self faced, 7.5cm to 10 cm thick, 25 cm to 35 cm wide, hoisted & set, jointed and grouted in cement mortar (1:3) complete all as specified & directed by Engineer-in-charge.

M&L for 50 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in Padding complete all as specified & directed by Engineer-in-charge.

Demolition of precast concrete block walling built in cement mortar including all quoins arches, pillers etc but excluding ashlar facings, dressed stone work and precast concrete articles and removal unserviceable materials, debris and rubbish complete all as specified & directed by Engineer-in-charge.

M&L for precast cement concrete block masonry 1:3:6 type C-1 (using 20mm graded stone aggregate) with solid blocks, exceeding 10cm width and setting in cement mortar 1:6 complete all as specified & directed by Engineer-in-charge.

M&L for providing precast cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls set in cement mortar 1:6 complete all as specified & directed by Engineer-in-charge.

M&L Rendering 10 mm thick on brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC (SWR) soil, waste and vent pipe single socketed 110mm bore in any length with rubber ring joints fixed to walls (Prince or Kissan make) complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC (SWR) soil, waste and vent pipe single socketed 75mm bore in any length with rubber ring joints fixed to walls (Prince or Kissan make) complete all as specified & directed by Engineer-in-charge.

M&L for in repair PVC (SWR) floor trap of 75mm dia outlet plain with grating including jointing with solvent cement complete all as specified & directed by Engineer-in-charge.

M&L for in repair PVC (SWR) gully trap of 125/100mm setting and jointing with slovent cement complete all as specified & directed by Engineer-in-charge.

M&L for Cement concrete in foundations, filling and mass-concrete Type B2 1:2:4 (40 mm graded aggregate) complete all as specified & directed by Engineer-in-charge.

M&L for 100mm cast iron sanitary connection socket in fit WC outlet complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish complete all as specified & directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed by Engineer-in-charge.

S&F glazed ceramic coloured jointless tiles dark shade of size 450mmx300mmx 7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick backing coat in CM (1:4) all as specified and directed by Engineer-in-charge.

M&L for non skid ceramic coloured jointless tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) all as specified and directed by Engineer-in-charge.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and directed by Emgr-In-Charge. Note : Any items required to be replaced shall be paid under respective items.

S&F in repair bib tap 15 mm dia cast copper alongwith crutch or butterfly handle screwed down CP fancy type complete all as specified and directed by Engineer-in-charge. (Make: Hindware Cat part no F330041, Prayag Cat part No 8306, Cera Cat part No F3001151)

S&F in repair 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified & directed. (Make :-Prayag Cat Part No.- 8304, Cera Cat Part no. -F 2006101, Hindware Cat Part No. -F 33002, Silver shine model No:-1065)

S&F in repair 15 mm bore stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-charge. (Make: prayag P15-26)

S&F in repair 20 mm bore stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-charge. (Make: prayag P15-26)

S&F in repair 25 mm bore stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-charge. (Make: prayag P15-26)

M&L for making good surfaces of distrubbed portion by applying plastering in CM 1:6 or fiilling with PCC 1:2:4 and applying 3 coats of white wash,the surface area n.exc.0.1 Sqm complete all as specified & directed by Engineer-in-charge.

S&Fin repair vitreous china squatting pan "orissa" pattern, WC of size 580 x 440 mm white, with integral foot rest (Excluding flushing cistern and flush pipe) and making good to the floor complete all as specified & directed by Engineer-in-charge.(Cera Cat part No-53010102, Hindware Cat Part No.- 20042)

S&F in repair vitreous china wash basin white, flat back of size 550 x 400 mm white including waste fittings, brass, chromium plated, coupling, waste pipe, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete all as specified & directed by Engineer-in-charge. (Make Prayag,Cera Cat Part No-B1010102, Hindware)

S&F in repair 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion complete all as specified & directed by Engineer-in-charge.

S&F in repair 1000 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC down take waste water pipe for WHB of size 32 mm dia and 60 cm long complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC connection pipe for WHB, cistern, gysers etc of size 15 mm dia and 450 mm long complete all as specified & directed by Engineer-in-charge.

S&F in repair CP grating (with & without hole) for Nahani trap and floor trap of size 100 mm dia complete all as specified & directed by Engineer-in-charge. ( Make :-Silver shine Model No SSO-806, & Model No SSCT-805 respectively)

S&F in repair Swivel shower rose 75mm size with arm 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified & directed by Engineer-in-charge. (Make :-Prayag Cat Part No-BS-38,Cera Cat Part No-F7020102,Silver shine model No- 935)

S&F in repairs Cast iron nahani trap of 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B 1 (1:2:4) directed by Engineer-in-Charge

S&F in repair PVC ball valve 15 mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass fernule complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC ball valve 20 mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass fernule complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC ball valve 25 mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass fernule complete all as specified & directed by Engineer-in-charge.

S & F in repair Vitreous china wash down water closet pan (Pedestal pattern), white (EWC ) with necessary P/S Trap and including jet spray and seat cover complete all as specified & directed by Engineer-in-charge. (Make :- Cera Cat Part No-S1050104, hindware cat Part No-20011)

S & F in repair CP brass Towel rail 20mm dia, D type, 60 cm long complete fixed in wall with screws complete all as specified & directed by Engineer-in-charge. (Make :- Hindware Cat Part No.-F880005, Cera Cat Part No FS003103, Prayag -BA 20)

S&F in repair stainless steel soap dish of standard size complete all as specified & directed by Engineer-in-charge.

S&F in repair Glass self complete all as specified & directed by Engineer-in-charge. (Make :- Hindware Cat Part No-F880010,Cera Cat Part No F5005301, Prayag- BEA-45)

S&F in repair stainless steel Toilet paper holder of standard size with cutting edge cover complete all as specified & directed by Engineer-in-charge.

S&F in repair chromium plated Angle valve 15mm complete all as specified & directed by Engineer-in-charge. (Make: Prayag Cat part no 8310, Cera cat part no F2006202, Silver shine model no 1010, Hindware Cat part no F330043)

S&F in repairs Vitreous china urinals with urinal spreader, full stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing complete all as specified & directed by Engineer-in-charge. (Make :- Cera Cat Part No- 54020102,Hindware Cat Part No-60002)

S&F in repairs PVC cover for PVC rotational moulded water tank for 500 & 1000 ltrs capacity white colour complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC seat cover black/white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified & directed by Engineer-in-charge. (Make: Cera Cat part no B1510107, Hindware, Parryware)

S&F in repair Bath cabinet, PVC make Prayag or equivalent approximate size 400x300x100 or 120mm with mirror on face complete all as specified & directed by Engineer-in-charge.

S&F in repair sinks made of stainless steel 1mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 610mm x 510mm bowl size 560mm x 405mm x 200mm complete all as specified & directed by Engineer-in-charge. (Make : Silver shine SSSB-44, Blue star, Nirali,Cera Cat part No B4511206)

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1143mm x 510mm bowl size 510mm x 405mm x 178mm complete all as specified & directed by Engineer-in-charge. (Make: Silver shine SSSBSD-55, Bluestar, Nirali, Cera Cat part no B4512204)

S&F in repairs Brass CP ball mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm dia bore complete all as specified & directed by Engineer-in-charge. (Make : Cera Cat part no F2006401, Prayag Cat part no 8275, Hindware Cat part no F-330020)

S&F in repair CP wash basin mixer for mixing hot & cold water screwed down for iron pipe 15mm dia complete all as specified & directed by Engineer-in-charge. ( Make: Hindware Cat part no F3300145-P, Cera Cat part no F2006461, Prayag Cat part no P15-50)

S&F in repair two way angle valve for fixing in 15mm dia bore complete all as specified & directed by Engineer-in-charge. (Make : Prayag Cat part No P15-11H, Hindware Cat part no F330006, Cera-F2006211)

S&F in repair two way 15 mm dia bib tap all as specified and directed. (Make: Cera- F3001161, Hindware-F330004CP, Prayag-P15-12H)

S&F in repair Health Faucet for EWC complete all as specified & directed by Engineer-in-charge. (Make :- Prayag - Bea-81, Hindware-F160027, Cera-F8030101)

S&F in repair Jet spray for EWC complete all as specified & directed by Engineer-in-charge.

S&F in repair waste fittings brass chromium plated for glazed ware sink, basins,etc with long screwed shank and fly nuts,flenges end bedded in red lead cement and other end fixed 32mm &40mm dia complete all as specified & directed by Engineer-in-charge. (Make: Silvershine-MNO-1501, Prayag-BEA-12)

Taking up or down steel tubing and connections of following size all as directed by Engg-in- Charge :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

S&F GI tubing (ISI) marked) medium grade with all fitting and fixed complete to wall ceiling or laid in floors of following sized :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

Refixing old steel tubing including cleaning and connections in new or old position (Wall, ceiling, floors etc) of the following size :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

S&F in repair 110 mm bore PVC (SWR) bends/shoes any radius complete all as specified & directed by Engineer-in-charge.

S&F in repair 75 mm bore PVC (SWR) bends/shoes any radius complete all as specified & directed by Engineer-in-charge.

S&F in repair 15mm fancy type, chromium plated with long shank and cup (concealed type) Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions complete all as specified & directed by Engineer-in-charge. (Make: Cera Cat part no-F3002361, Hindware Cat part no F-200007, Prayag Cat part no P15-20H)

S&F in repair stainless steel plate rack of size 910mm X 790mm X250mm complete all as specified & directed by Engr-in-Charge. (Make: Silver shine model no 315, Bluestar, Nirali)

Cleaning and removing all scales and dirt etc from water tanks and from mouths of circulating pipes etc capacity exc 250 and n.exc 500 litres all as directed by Engineer-in-charge.

Cleaning and removing all scales and dirt etc from water tanks and from mouths of circulating pipes etc capacity exc 500 and n.exc 1000 litres all as directed by Engineer-in-charge.

S&F in repair of GI elbow, tee, nipple, socket of 15mm size complete all as specified & directed by Engineer-in-charge.

S&F in repair of GI elbow, tee, nipple, socket of 20 mm size complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC down take waste water pipe for urinals of size 32 mm dia and 100 cm long complete all as specified & directed by Engineer-in-charge.

S&F in repair syphonic flushing cistern kit for PVC flushing cistern 10 ltrs capacity complete all as specified and directed by Engineer in Charge.

M/S MAYA CONSTRUCTION COMPANY

BHAGWATI CONSTRUCTION

jyoti power corportion