Improvement works to the Outer Toilet and Providing Steel Door Paver block to the South side of Community Hall at Thermal Nagar

Earth work excavation in all soil such as loose soil, other sand, silt, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil and depositing on bank with an initial lead of 10m and initial lift of 2m including cost of all materials, labour, lead, lift, etc., complete.

Dismantling the existing damaged RCC Structure and clear away the debris from the site including cost of all labour, lead, lift, etc., complete.

Clean removal of cracked,damaged cement plaster from walls and clear away the debris including cost of all materials, labour, lead, lift, etc., complete.

Dismantling of Brick work in cement mortar and clearing away the debris from site including cost of all labour, lead, lift, etc., complete.

Providing PCC 1:2:4 using OP/PP cement with 12 to 20mm metal (machine crushed) including cost of all materials, labour, lead, lift, etc., Complete.

Providing Brick work in CM 1:5, using flyash brick including cost of all materials, labour, lead, lift, etc., complete.

Providing centering and shuttering using steel structures & props 10 to 13cm dia, including cost of all materials, labours, lead, lift, etc. complete

Providing RCC 1:11/2:3 using OP/PP cement with 12mm to 20mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement and form work.

Supplying& providing RTS/MS rod including cutting, bending, tying and fixing in position as per specification including binding wires, cost of all materials, labours, lead, lift, etc. complete.

R.R Masonry in C.M.1:5 including cost of all materials, labours, lead, lift, curing, etc. complete.

Pointing with C.M 1:3 to RR Masonry, including cost of all materials, labours, lead, lift, curing, etc. complete.

Collection and insertion of glass pieces over the top surface of compound wall for safety purpose including cost of glass pieces,labour,lead,lift,etc., complete.

Hollow block masonry using hollow block of size (16'' x 8'' x8'') in CM 1:5 including cost of all materials, labours, lead, lift, curing, etc. complete.

Supply and fixing floor tiles of 305 x 305 x 6mm first quality design ceramic tiles of approved colours in CM 1:3, 10mm thick and pointing with white cement 0.4 Kg/Sqm including cost of tiles labour, lead, lift, tools etc., complete.

Providing pressed tile roof in cement mortar and relaying with new pressed tiles of size 20x20x2cm in cement mortar 1:3 mixed with crude oil 10% by weight of cement over a bed of 25mm surkhi concrete and pointing with same mortar including cost of all labour, lead, lift, etc, complete.

Providing wall with glazed tiles of approved make first quality printed design and colour laid in CM 1:2, 10mm thick and pointing with white cement of 0.4 Kg/ Sqm including cost of materials labour, lead, lift, etc., complete.

Pointing with C.M 1:3 to full depth of tiles including cost of all materials, labours, lead, lift, curing, etc. complete.

Supplying and providing New PVC panelled door shutters hollow type 200x20mm panels with 1mm wall thickness for panels and styles and rails of suitable size with 2mm wall thickness suitably reinforced using MS Angle/ flat including cost of necessary Aluminium hinges and other furniture fitting such as screw,bolt,and nuts 3Nos 3" Aluminium hinges 2Nos 3" Aluminium Tower bolt 2Nos,4"Aluminium handles including cost of all materials, lead, lift, etc., complete.

Providing and fixing steel door of required size with single leaf, frame using 30x30x5mm M.S.angle shutters with 30x20x3mm M.S.angle and flat 4x5mm for door sfiffner center portion 20x5mm for shutter stiffner horizontal and 16x5mm for door stiffner outer vertical and horizontal with 2mm thick M.S.Sheet both sides made with 2 no. tower bolt, 1 no. aldrop, 2 no. handles, 3 nos. hinges with cost of all materials lead lift etc., complete including two coats of approved quantity enamel paint over the priming coat of red oxide.

Supplying and providing new GALVALUME SHEETS of 0.47mm thick rate including cost of all materials, fixtures, bolts / rivets with all lead, lift, labour etc., complete.

Labour charges for cutting, welding, fabrication & laying in position of the MS boiler tubes / MS Plates including cost of labour charges, cutting, fabrication charges, lead, lift, etc., complete. (M.S Scrap will be supplied by Dept. at free of cost)

Supplying and providing GI pipe of various size in water tanks as delivery / drain pipes including dismantling brick work, fixing the GI pipe inclusive of cutting and threading and finishing the hole with PCC 1:1.5:3 concrete wherever necessary including cost of all materials, labour, lead, lift etc., complete. a) 20mm dia. GI pipe

B) 15mm dia. GI pipe

Supplying and fixing in position of various size in GM Gate Valve / Wheel valve of heavy duty by replace the existing damaged wheel valve including cost of valve, labour, lead, lift, etc., complete. a) 20mm dia Gate valve

Supplying & fixing of PVC pipe of 110mm dia. 4 kg/cm2 with necessary specials for rain water downfall pipe (water line) and finishing the groove surfaces with plastering in C.M 1:2 mix including cost of all materials, labours, lead, lift, curing, etc. complete.

Supplying and providing Brass chromium plated pillar tap (heavy duty) in wash basin rate including cost of materials, labour, lead, lift etc., complete.

Providing false ceiling with Thermocoal 25mm thick over the Aluminium section 25x25x 1mm (T & L angle) with 50cm c/c in one direction with 6mm dia M.S rod as stiffner at a distance of 1.25m c/c including cost of all materials, labour, lead, lift, scaffolding charges etc., complete.

Replacing the Indian water closet of size 450mm while glazed earth ware with ‘P’ trap with sand cushion and forming flooring alround the water closet using 20mm brick jelly in lime concrete and plastering with CM 1:3, 20mm thick including cost of all materials, labour, lead, lift, etc., complete.

Replacing the damaged Indian water closet of size 450mm while glazed earth ware with ‘P’ trap with sand cushion and forming flooring alround the fixing Western Water closet of approved quality and colour and size with 'P' or 'S' trap with double flapped seat & seat cover with brass hinges and 12.5 Lit capacity PVC low level flushing tank with all internal fittings & 15mm ball valve using 20mm brick jelly in lime concrete and plastering with cm 1:3, 20mm thick including cost of all materials, labours, lead, lift, curing, etc. complete.

Supplying and providing steel door rate including cost of materials, labour, lead, lift etc., complete.

Supplying and providing PVC pipe (6" pipe) rate including cost of materials, labour, lead, lift etc., complete.

Supplying and providing sticker with board rate including cost of materials, labour, lead, lift etc., complete

Supplying and providing floor fixing reflection sticker, rate including cost of materials, labour, lead, lift etc., complete

Providing, supplying and laying factory made chamfered edge cement concrete 60mm thick Paver block of M-35 grade with approved colour, design & pattern of required strength, thickness & size/ shape made by tangle vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver block to the required size and pattern, finishing and sweeping extra sand etc. including all materials, labour, lead, lift, Tools & Plants, conveyance etc., complete.