752908A PROVN OF 500 MTR BAFFLE RANGE AT THE BIHAR REGIMENTAL CENTRE DANAPUR CANTT

Amount

SCHEDULE "A"

SCHEDULE "A" PART-I (BUILDING WORKS) Lump sum price worked out by the contractor for 'Building work' as listed in Schedule 'A' Part-I against the lump sum price inserted by the MES.

Sch 'A' Part-II (Internal Water supply) Lump sum price worked out by the contractor for Internal Water supply) as listed in Schedule 'A' Part-II against the lump sum price inserted by the MES.

Sch 'A' Part-III (Internal Electric Supply) Lump sum price worked out by the contractor for 'Internal Electric Supply' as listed in Schedule 'A' Part-III against the lump sum price inserted by the MES.

Sch 'A' Part-IV (External Water supply) Lump sum price worked out by the contractor for 'External Water supply' as listed in Schedule 'A' Part-IV against the lump sum price inserted by the MES.

Sch 'A' Part-V (External Electrification ) Lump sum price worked out by the contractor for 'External Electrification' as listed in Schedule 'A' Part-V against the lump sum price inserted by the MES.

Sch 'A' Part-VI (Road, Path and Culvert) Lump sum price worked out by the contractor for 'Road Path and Culvert' as listed in Schedule 'A' Part-VI against the lump sum price inserted by the MES.

Sch 'A' Part-VII (Sewage Disposal) Lump sum price worked out by the contractor for 'Sewage Disposal ' as listed in Schedule 'A' Part-VII against the lump sum price inserted by the MES.

Sch 'A' Part-VIII (Area Drainage) Lump sum price worked out by the contractor for 'Area Drainage ' as listed in Schedule 'A' Part-VIII against the lump sum price inserted by the MES.

Sch 'A' Part-IX (Demolition) Lump sum price worked out by the contractor for Demolition) as listed in Schedule 'A' Part-IX against the lump sum price inserted by the MES.

Sch 'A' Part-X (Fencing/ Gate/ Compund Wall) Lump sum price worked out by the contractor for 'Fencing and Gate / Compound Wall' as listed in Schedule 'A' Part-X against the lump sum price inserted by the MES.

Sch 'A' Part-XI (Site clearance, excavation & earth works) Lump sum price worked out by the contractor for 'Site clearance, excavation & earth works' as listed in Schedule 'A' Part-XI against the lump sum price inserted by the MES.

Note for Srl No 2 to 22 The percentage above / below the SSR -2020 (part-II) rates shall be derived from the amount quoted by the contractor against Srl No. 2 to 22 by comparing it with the amount inserted / pre- priced by the department and the same shall be applicable for the items of respective schedule

Schedule 'A' Part-XII (Miscellaneous items of works)

Item No 01 : RCC Culvert of 5.60 Metre wide with Hume/NP2 single pipe 600 mm dia in expansive soil including necessary excavation & earth work, all as shown on TD dirgs, specified & directed

Water Cooler

Item No 02 : "Supply, installation, commissioning and testing of water cooler fully stainless steel SS-304 material body, electric driven single phase 240 volts 50 HZ having storage capacity of 80 ltrs and nominal cooling capacity of 40 ltrs per ours. R134a refrigerant gas filled, two nos faucets/push tap, water over flow connection complete all as specified and directed by Engr-in-charge".

Item No 03 : Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for inpur variation between 150 volts to 280 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and of capacity 3.0 KVA copper wounded complete all as specified and directed

Desert Cooler

Item No 04 : "Supply & fixing heavy duty desert cooler min Air delivery/capacity 5000 cum/hr, with steel body with steet thicknees for filter, panel, grill, top of cooler body, cabinet not less than 0.8mm and for sump tank not less than 1 mm with iron stand as recommended by manufacturer for fitting at window, all internal surface of steel body cooler painted with water resistant paint of suitable fan size and fan motor, directional front grill of suitable size having air throw min 80 feet, submersible pump, anti bacterial technology pads, bottom water tank capacity not less than 80 liters complete all as specified and directed by GE. Note : 1. Contractor shall provide warranty of 02 years for product & pump and is liable for defect rectification during this period. 2. TD Shall be followed for cooler stand.

External Water Supply

Item No 05 : Supply and fix cast iron Air valves with single air outlets, flange type conforming to IS - 5312 class PN 1.0 of size 80 mm dia bore rubber seal complete all as specified and as directed.

Item No 06 : Material and labour for boring hole under the road/pavment/hard standing with the help of trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 Mpa working pressure not less than one metre below ground level complete all as specified and as directed.

Item No 07 : S & F for pump set, openwell horizontal / vertical submerssible suitable single/ three phase system having capacity 2.0 Hp/1.5 KW with head range 19-20 mtrs, discharge 175-20 LPM, including suitable size of pump motor controller and submersible cable 4 sqmm from control pannel to pump including base of pump and all fixing arrangement complete all as specified and as directed.

Item No 08 : M& for construction of brick masonary valves pits, of the following internal dimension complete with 3.15 mm thick MS sheet cover angle iron frame duly painted with locking arrangement including all necessary excavation and earth work PCC work complete all as shown on TD Drgs, specified and directed.

(a) 900 mm x 900 mm x 900 mm

(b) 600 mm x 600 mm x 600 mm

Item No 09 : Material and labour for earthing complete with galvanised steel plate electrodes of size 600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 32x 6 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 40 mm bore (Medium grade) for LT panel/FPB complete all as directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar finnel wire mesh 20 mm bore galvanised iron pipe (medium grade) for watering point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt in alternate layers complete all as shown in electrical plate No 3 of SSR Part I including submit testing certificate after completion all as specified and directed.

External Electrical Supply

Item No 10 : Supply , installation commissioning and testing of Factory assembled Silent DG set with AMF panel of capacity 30 KVA, 1500 RPM , Turbo Charged, water cooled comprising of 40 BHP Engine with microprocessor based Genset controller with silencer and canopy for sound less mode (sound level not exc level specified by pollution control board) and alternator both mounted on a common base frame conforming to ISO-3046/BS-5514 and IS-10002 rated for 415 volts 50 cycles , 0.8 Power factor (PF) complete with residential silencer, AVM pads , battery with its leads, first fill of lub oil and all engine accessories such as self starter, alternator/dynomo with suitable coupling and base frame on foundation as recommended by the manufacturer and consisting of other electrical component and maintenance free battey including suitable size of copper cable lead with terminal, all mounting accessory and AVM pads all as specified comprising with the following.

A. Engine : (a) Vertical multicylinder, cold starting in accordance with BS-5514/IS-10002 at 1500 PM including the following accessories :- (i) Fuel tank(Suitable for capacity for minimum 10 Hrs run). (ii) Fuel filter(Ore & Micro). (iii) Fuel feed pump(Inline monoblock/PT type) with governor. (iv) Lub oil filter. (v) Lub oil cooler. (vi) Dry type/oil bath type air cleaner. (vii) Exhaust Silencer(Industrial type). (viii) Radiator, Radiator fan & mounting. (ix) Fly wheel with starting ring. (x) Expansion bellow. (xi) Exhaust gas turbocharger. (xii) 12 Volt electric starter with 01 Nos maintenance free battery 130 AH capacity. (xiii) Battery charging alternator (xiv) Engine control panel consisting with ON/OFF Start Key,Lub oil pressure guage, Battery charging ammeter,Coolant temp gauge, RPM Meter etc. (xv) Suitable flexible coupling (xvi) Front & Rear engine mounting supports (AVM pads)

B. ALTERNATOR (i) Alternator, 3 phase, 415 Volts, 50 Hzs, 0.8 PF, 1500 RPM self excited, self regulated screen protected, drip proof alternator of capacity 30 KVA conforming to BSS 5000 (part 99) with insulation class "H", single bearing and automatic voltage regulator accessories

C. ACOUSTIC ENCLOSURE (i) Specially design to meet stringent MOEF/CPCB norms of 75 dBA @ 1 mtr at 75% load under free field conditions. (ii) Air inlet louvers specially designed to operate at rated load even at 50 degree C air inlet temp. (iii) Powder coated for long lasting service life and superior finish. . (iv) Insulation material meets exacting IS 8183.

D. ACCESSORIES (i) Suitable channel frame (ii) Storage battery of 1X12 Volts of suitable 130 AH capacity as per manufacturer instruction mounted on angle iron frame of suitable size as directed.

E. CONTROL PANEL The control panel shall be made of CRCA sheet duly fabricated and powder coated and complete with internal wiring, bus bar etc and fitted with the following accessories :- (i) MCCB 4 Pole 125 Amps 25 KA thermal release type – 01 No (ii) Digital Ammeter with CT of size 200/5A – 01 No (iii) Digital Voltmeter 3 Ph 415 volts – 01 No (iv) Microprocessor based DG set control unit with SIM enable - 01 No (v) Indicating lamps (LED type) (R-Y-B) – 01 set

F. AMF PANEL The control panel shall be made of CRCA sheet duly fabricated and powder coated and complete with internal wiring, bus bar etc and fitted with the following accessories :- (i) MCCB 4 Pole 125 Amps 25 KA Microprocessor release type – 02 Nos (ii) Contactor 125 Amps -02 Nos (iii) Digital Ammeter with CT of size 200/5A – 02 Nos (iv) Digital Voltmeter 3 Ph 415 volts – 02 Nos (v) Indicating lamps (LED type) (R-Y-B) – 02 sets (vi) Relay, timmer and other acessories as per manufacturer.

Item No 11 : Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed.

(a) 3.5 core x 70 Sqmm

(b) 3.5 core x 35 Sqmm

(c) 4 core x 25 Sqmm

(d) 4 core x 16 Sqmm

(e) 4 core x 10 Sqmm

(f) 2 core x 10 Sqmm

Item No 12 : Supply and fixing LED light fitting for street/security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with toughened glass and individual high power LED with secondary optics of capacity 70/75 Watt 240 volts AC 50 Hz , IP 66 protection including pole junction box, electrical connection and five years on site warranty from manufacturer complete all as specified and directed.

Item No 13 : Supply, installation and commissioning of 16.00 Mtrs High mast system with its accessories. Mast shaft shall be in two sections,hot dip galvanised inside and outside and suitable forwind velocity as per IS 875 and including head frame, steel wire rope 6 mm dia (7/19 construction), trailing cable, double drum winch, Galvanised Lantern carriage drum winch arrangement suitable for 8 (Eight) luminaires symmetrically and lightning finial. The mast shall have an integral power tool installed inside the base compartment for its operation with minimum 0.75 HP three phase electric motor, foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. The high mast lighting system supplied with the following accessories

(a) LED flood light luminaires 200/210 Watts IP 66 type with lens incl standard fittings pressure die cast aluminium housing with heat reistant toughened front glass housing with epoxy powder coated finsh and , complete with control gear box and all accessories duly prewired.- 08 Nos. Make: Bajaj/ Crompton /Havells/Surya /Jaquar (b) Low intensity twin type aviation obstruction lamp of GLS type with super bright red LED 300 Nos per lamp of IP – 65 protection aviation obstruction light complete all as directed.Make – CG / Havells / Bajaj / Surya . (c) Trailing cable as PVC insulated and PVC sheathed 1100 Volts grade ISI Marked multistranded copper conductor cable 6 Core 2.5 Sqmm size. (d) Lightning protection finial with GI single spike as per manufacturer approved. (e) Earthing complete with galvanised steel plate electrodes with 25 X 3mm strip og GI as per manufacturers approved.- 02 Nos. (f) Pole drawing and RCC/PCC foundation work with M20 grade concrete for errection of pole shall be carried out as per manufacturers approved drawings.

(g) LT Feeder Pillar Box Supply, installation, testing and commissioning, factory made and tested, LT feeder pillar box ,outdoor type , platform mounted. The panel shall be dust and vermin proof, IP65 class protection and made out of 3.15mm thick CRCA MS sheet and 40x40x4mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, with double door shutter and locking arrangement including provn of 65mm Godrej (Freedom) stranded lock with 2 keys, internal wiring with PVC insulated, stranded copper conductor FRLS cable, IS-694 marked of adequate size but not less than 6.0 Sqmm. The following items accommodated with this feeder pillar including 02 Nos danger notice plate made of 1.6mm thick mild steel sheet, vitreous enameled white of size 25 x 20cm with letter figures and conventional skull bones in signal red colour and fixed nuts, bolts and washers etc with voltage and danger indicated in Hindi and English complete all as specified and directed. The scope of work includes the following items accommodate the same panel.

(i) Stag type, 4 way terminal (I/P) 63 Amps – 01 No (PCB 150 ACBC) (ii) MCCB 4 Pole, 415 volts AC grade, 40 Amps 25 KA Icu=100%Ics.(Make: Legrand/L&T/ SIEMENS) - 01 No (iii) Contactor 3 pole 32 Amps – 01 No (Legrand/L&T/SIEMENS) (iv) Toggle switch 6 Amps – 01 No (v) Timer (analogue) with battery backup – 01 No (Legrand/L&T/SIEMENS) (vi) Stage type, 4 way terminal (O/P) 63 Amps-01 No (PCB 150 ACBC) (vii) Over load relay 2/3.5A – 01 No (Legrand/L&T/SIEMENS) (viii) F. contractor 9 A – 01 No (Legrand/L&T/SIEMENS) (ix) R. contractor 9A – 01 No (Legrand/L&T/SIEMENS) (x) Motor terminal 32 Amps – 01 No (Legrand/L&T/HPL) (xi) Push switch terminal (STD) – 01 No (Legrand/L&T/SIEMENS) (xii) Push switch (F/R) (STD) – 01 No (Legrand/L&T/SIEMENS) (h) PCC foundation work for LT control Panel as per manufacturers approved drawings. (j) Earthing complete with galvanised steel plate electrodes with 32 X 6mm strip of GI as per manufacturers approved.- 02 No (k) Work to be executed by the manufacturer or there authhorized rep and MOU undertaking of the same from the manufacturer be submitted prior to excution of work .

Item No 14 : BLANK

Item No 15: Supply and installation LED flood light fitting for Traget lighting with energy saving & environmental friendly long life versatile pressure die-cast housing with toughened glass and individual high power LED with secondary optics of capacity 70 watt 240 volts AC 50 Hz, IP 65 protection including necessary electrical connection and five years on site warranty from manufacturer complete all as specified and directed.

Item No 16 : Supply and fixing LED post top lantern light fitting 45 watt IP65 complete with all accessories complete all as specified and as directed.

Item No 17 : Supply, fabrication, installation and testing Outdoor type LT Panel factory made CPRI approved, water & vermin proof protection of suitable size recommended as per IS/BIS specification made out of 3.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item. (LT Main Panel)

INCOMMING

(a) Copper strip busbar of 200 amps rated capacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos.

(b) 4 pole MCCB 125 Amps thermal magnetic release type 415 volts, Ics=100% Icu, breaking capacity 25 KA including all fixing accessories with both end spreader links - 02 Nos

(c) On load changeover switch TPN of capacity 125 Amps - 01 No

(d) LED Neon indicator lamp (RYB) with holder, and fuse holder 230/250 volts, AC -01 set (set of three). Make Legrand / L&T/Schneider.

OUTGOING

(a) 4 pole MCCB 63 Amps thermal magnetic release type 415 volts, Ics=100% Icu, breaking capacity 18 KA including all fixing accessories with both end spreader links - 02 Nos

(b) MCB TPN 32 Amps 'C' series, 10 KA breaking capacity - 02 Nos

(c) Multifunctional Digial type timer Switch (Astro type having longitude and latitude of indian cities memory) 240 volts AC single phase -01 Nos.

(d) Power contractor 4 pole, 40 Amps, 415 volts, 50 Hz - 01 No

(e) MCB TPN 16-32 Amp 'C' series, 10 KA breaking capacity - 02 Nos

(f) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No.

Item No 18 : Supply and fixing of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including submit test certificate on completion complete all as specified and directed.

Sump Well Cum Pump House

Item No 19 : Designing (hydraulically, structurally and aesthetically), and constructing RCC sumps for avg flow 50 Cum/day and overall depth 6.00 mtr, in M-30 mix including excavation in all types of strata, foundation concrete, container walls, bottom slab, top RCC roof slab with CI manhole covers and with plaster and water proofing as per zonal specification including epoxy paint inside, refilling of earth and disposal of surplus earth within 50 m lead, including all piping connections, valves, internal electrification, MS ladder, ventilation shaft, BB chambers with 5m of outer wall of tank complete including test for water tightness and hydraulic functioning. Top room as per zonal specifications included.

Item No 20 : Designing (hydraulically, structurally and aesthetically), and constructing RCC sumps for avg flow 50 Cum/day and overall depth 6.00 mtr, in M-30 mix including excavation in all types of strata, foundation concrete, container walls, bottom slab, top RCC roof slab with CI manhole covers and with plaster and water proofing as per zonal specification including epoxy paint inside, refilling of earth and disposal of surplus earth within 50 m lead, including all piping connections, valves, internal electrification, MS ladder, ventilation shaft, BB chambers with 5m of outer wall of tank complete including test for water tightness and hydraulic functioning. Top room as per zonal specifications included.

Arboriculture

Item No 21 : Supplying and stacking at site decayed dung manure screened through IS designation 20 mm sleve from approved source complete all as specified and directed. Note: (i) The rate quoted shall include cost of royality excavation and transtortation of manure to any distance and stacking for measurement (ii) Manure measured in stacks will be reduced by 10% for payment.

Item No 22 : Tilling of land by means of suitable mechanical means i.e. tiller etc pulled by tractor and levelling / planning the surface using heavy wooden pallet for light compaction and preparing the surface containing optimum moisture content and planting doob grass in rows 10 cm apart in either direction complete all as specified and directed by engineer - in charge.

Item No 23 : Mixing decayed cowdung manure and earth to make mixture of earth & manure, spreading the same over requred area and surface dressing the area to a true level and required slope for grass plantation or to make plant/flower bed.

(i) 100 cm dia and 100 cm deep

(ii) 60 cm dia and 60 cm deep

Item No 25 : Flooding ground lawn flower beds, plant surrondings etc including necessary arrangements to retain water in the area, if required and removing of vegetable and grass in the area complete. (i) Lawn/ground

Item No 26 : Uprooting weeds from the tenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Item No. 28 : Preparation of flowers beds (Seasonal/perinial) by digging upto 45 cm deep sun drying for 3-5 days, mixing with cowdung manure (5cm thick layer all over the area) application of insecatisides @ of 25 ml per square meter, planting and seeding at specified distance and irrigating the area till the development of healthy flower product completely all as specified and directed.

Item No. 29 : Preparation of beds hedging and shrubbery by excavating 60 cm deep and trenching the excavated beds to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction of 20% one part of stacked volume of sludge or manure after reduction by 8%). Flooding with water, filling with earth if necessary plantation watering and finally fine-dressing, levelling etc. complete all as specified and directed.

Item No. 30 : Plartation of neem, mango, jamun, kikar, seasam, guava, sangwan tree with plants having minimum height for 1.20 meter above ground level including preparation of plant bed incl manuring and watering complete all as specified and directed.

Item No. 31 : Ditto but lemon and orange trees with plants having minimum height of 0.90 metre above ground level complete all as specified and directed.

Item No.32 : Plartation of Bottle - Palm Trees with plants having minimum height of 1.5 metre above ground level including preparation of plant bed incl manuring and watering complete all as specified and directed. Note: (i) Tree plants will be obtained from nursery of bihar Govt or any other nursery approved by GE (ii) Payment for this item shall be made only for the plants found alive any dead plant shall be replaced with the new ones without any extra cost to the govt.

Item No. 33 : Supply and mixing/ spreading insecticides as and when required chloropyriphos or lindane emulsifiable concentrate confirming to IS 8944 or IS 632.

Item No. 34 : Supply only rubber/ PVC tube heavy duty for watering of 25 mm dia complete all as specified and directed.

Item No. 35 : Supply only brass sprinkles, heavy duty suitable for connecting to 25 mm dia water connection with and including MS standing arrangement for watering the area complete all as specified and directed.

Internal Electrification

Item No 36 : M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chases and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Item No 37 : Description all as per item No 36 here in before but using 2.5 sq mm single core copper conductor two nos cables of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No 38 : Description all as per item No. 36 here in before but using 4.0 sq mm single core copper conductor two nos FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC point)

Item No 39 : S & F modular type TV Socket out let complete all as specified and as directed.

Item No 40 : S & F modular type LAN Socket RJ 45 with complete box complete all as specified and as directed.

Item No 41 : S & F modular type Telephone socket RJ 11/12 with complete box complete all as specified and as directed.

Item No 42: S & F modular Metal flush box 8 module complete all as specified and as directed.

Item No 43 : S & F modular Metal flush box 12 module complete all as specified and as directed.

Item No 44 : S & F modular white cover plate with frame 12 module complete all as specified and as directed.

Item No 45 : M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 4 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable, two runs of 4 sqmm cable and one run of PVC conduit will be measured as one unit

Item No 46 : M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 2.5 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one runs of PVC insulated with 2.5 Sqmm (nominal area) stranded copper conductor FRLSh cable as earth wire complete all as specified and as directed. Note:- Two runs of 2.5 sqmm cable, one runs of 2.5 sqmm cable and one run of PVC conduit will be measured as one unit

Item No 47 : M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSh cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

Item No 48 : S & F for sheet metal enclosure MCB DB TPN 4 way Horizontal type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No 49 : S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door including blanking plate for dummy space with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No 50 : S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door including blanking plate for dummy space with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No 51 : S & F for MCB four pole rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No 52 : S & F for MCB Double Pole rated capacity 40-63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No 53 : S & F for MCB Single pole rated capacity 6-32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No 54 : S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including all accessories as one complete set all as specified and as directed

Item No 55 : S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting,luminous efficacy not less than 120 lumen/watt 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor and flexible conduit of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Item No 56: S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts , luminous efficacy not less than 110 lumen/wattwith pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.

Item No 57 : S & F occupancy sensor suspended type to detect the presence of a person for include automatic adjustment of lights systems in response to the quantity of peoople present for switch off/on the light in a circuit as per user reqmt (for use at parking area, verandah or any other space where power saving srequired).

Item No 58 : M & L for earthing complete with galvanized earth plate electrode 600mmx 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 3 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-1 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe and 15 mm dia GI pipe for protection of GI wire up to 7.5 mtr connected to earthing point complete all as specified and as directed.

Item No 59 : Supply and Fix LED Solar all in one system integrated type of capacity 25W, lumen efficacy 150 lm/W, 60Wp, 30 AH, PIR inbuilt for motion detection, one night backup in full charge capacity system has lithium ferrous phosphate battery, mono crytalline panel with pole of height 6 mtr 40 dia made up of GI pipe heavy grade complete all as specified and directed.

Furniture

Item No 60 : Chair plastic with Arms premium quality shape, colour and quality as aprroved by GE. Make : Rosa(TP).

Item No 61 : Table Plastic premium quality shape, colour, and quality as approved by GE. Make: ULTIMA MARBLE BEIGE Neelkamal (TP)

SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 220500.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount)

NARSINGH DEVELOPERS LLP (BID ID -3132185)

Aalaya Engineering Project Private Limited (BID ID -3138096)

AMIT ASSOCIATES (BID ID -3137970)

Narayan Kumar Infrastructure Pvt Ltd (BID ID -3138478)

Arun Deo Kumar (BID ID -3138140)

CHHABINDRA KUMAR PRADHAN (BID ID -3135275)

D R STEEL CONSTRUCTION COMPANY PRIVATE LIMITED (BID ID -3138783)

Ktech Engineer Builders Co. Pvt. Ltd (BID ID -3138362)

SHREYANSH TRADING AND CONSTRUCTIONS PRIVATE LIMITED (BID ID -3135597)

VERMA BROTHERS (BID ID -3136442)

SOOD ASSOCIATES PVT LTD (BID ID -3138900)

LUMOS INFRA PVT LTD (BID ID -3138809)