Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.2 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹31.8 L+₹95,742.50 (3.10%)Rejected-Finance | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹32.3 L+₹1.4 L (4.49%)Rejected-Finance | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹32.3 L+₹1.4 L (4.58%)Rejected-Finance | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹32.9 L+₹2.0 L (6.44%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹94,000
Closing Date
10 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
COMPREHENSIVE REPAIRS AND MAINTENANCE TO CERTAIN BUILDINGS IN CG COMPLEX IN ND MBI UNDER AGE B R I UNDER GE (NW) KUNJALI
2022_MES_523990_1
8461/CWE (NW) Mumbai/ E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) KUNJALI
Class D
7 documents required · 7 mandatory
₹500
Yes
GE (NW) Kunjali
₹94,000
Yes
15 Jul 2022
13 May 2022
13 Jun 2022
13 May 2022
10 Jun 2022
27 May 2022
13 May 2022 - 25 May 2022
60 days
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
Material and Labour Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding/equal to 0.36 sqm but n exc 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Material and Labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Material and Labour for Coloured glazed ceramic tiles in vertical surface 450 X 300 X 7 mm or 300 X 200 X 7mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge.
Demolition of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed by Engineer-in-Charge
Material and Labour for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Material and Labour for 20-25mm thick, machine cut, Kota stone slab, as in riser of steps, landing, skirting, dado and pillar etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Material and Labour for Hard wear stone (of any type) granite stone slab 20mm thick in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Material and Labour for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge
Material and Labour for cement concrete tiles 25cmX25cmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:3. complete all as specified and directed by Engineer-in-Charge
Material and Labour for Chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour over including 20mm thick screed bed in CM 1:6 ccomplete all as specified and directed by Engineer-in-Charge
Material and Labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 80mm thickness M 40 grade with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed by Engineer-in-Charge
Material and Labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness M 35 grade with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed by Engineer-in-Charge
Material and Labour for PCC 100mm thick D-2 type (1:4:8), using (40 mm graded aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge
Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, false ceiling, wall panneling & partation boards bonded wool, blanket slab incl aluminium grid frame work complete all as specified and directed by Engineer-in-Charge
Material and Labour for Anodised aluminium snap grid frame work for false ceiling of grid size 605X605 mm with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm (etc complete all as specified and directed by Engineer-in-Charge
Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge
-ditto- as per Item No 18 above but n.exc 1.5 sqm complete all as specified and directed by Engineer-in-Charge
Material and Labour powder coated Aluminium frame and shutter for doors, sliding windows & ventilators (moveable louvers type) and for partitions with one or more rebates including joining cleat for fixing etc. Rubber gasketing all round the panels/ shutters to fix glass, PVC gasketing in all channels, locking arrangement, (minimum thickness of powder coating 50micron) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 5mm thick glass sheet one side frosted ordinary quality and glazing with in square, n exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator in repairs.
Supply and Fixing 5mm thick glass sheet one side frosted ordinary quality and glazing with in square, exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator in repairs.
Supply and Fixing in repair aluminum anodised GRILL (Deco grill DG 103 of 7.5 mm thick of M/s ELESAR FOCCHI Ltd.) fixed with suitable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed by Engr-in-charge.
Supply and Fixing 12 mm thick pre-laminated Medium Density board,both side decorative lamination interior grade,fixed in aluminium/ wooden frame work complete all as specified and directed by Engr-in-charge.
Taking down cement plaster or cement lime plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge
Material and Labour rendering 20 mm thick ready mix plaster as on fair faces of brick/stone work or concrete surfaces complete all as specified and directed by Engineer-in-Charge
Material and Labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof complete all as specified and directed by Engineer-in-Charge
Material and Labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including Sagol finish complete all as specified and directed by Engineer-in-Charge
Material and Labour for rendering 5mm thick in CM 1:3 on ceiling surface complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant primer with 3mm thk wall care putty on plastered surfaces complete all as specified and directed by Engineer-in-Charge
Material and Labour preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge
Material and Labour prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper on plastered/decorated wall surfaces complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of old wall surfaces of any description & applying one coats of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed by Engineer-in-Charge
Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr-in-charge.
Supply and Fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engineer-in-Charge
Supply and Fixing for PVC (SWR) bends any radius 110mm bore complete all as specified and directed by Engineer-in-Charge
Material and Labour for 100mm dia cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls or laid in trenches etc complete all as specified and directed by Engineer-in-Charge
Material and Labour 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls or laid in trenches etc complete all as specified and directed by Engineer-in-Charge
Supply and Fixing CI bends (any radiius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors of following sizes
(a) 75mm dia
(b) 100mm dia
Supply and Fixing in repair 75mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs 100mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engineer-in-Charge
Supply, lay, connect and test GI Tubing, medium grade with all fittings and fixed complete to wall and ceiling or laid in floor completeincluding taking down of existing pipeline all as specified and directed for following sizes:-
(a) 15mm dia
Supply and Fixing of vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , fixing with automatic flushing system with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-Charge as fixed in repairs.
Supply and Fixing for vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-Charge as fixed in repairs.
Supply and Fixing in repairs 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets for fixing purpose, waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed.
Supply and Fixing vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing vitreous china wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) fixed as in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed by Engineer-in-Charge
Supply and Fixing brass Chromiun Plated towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing toilet paper holder of viterous china box type white coloured fixed to walls withchromium plated brass screws CP brass fixed to walls etc, fixed in repairs complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs brass CP shower rose 125mm size complete all as specified and directed.
Supply and Fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed by Engineer-in-Charge
Taking down shutters of any description exc 1 Sqm but nexc 2 sqm complete all as specified and directed by Engineer-in-Charge
Supply and Fixing Ist class hard wood glazed and skelton shutter 30 mm thick window shutters divided into squares with plain chamfered or rounded mitred and rebated sash bars with edges of shas bars and frame moulded, fitted with out and mitred beeds for screwing glass/guage etc size of members of shutters as specified in SSR Part-I Section 8.20 (b) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 35mm thick second class hard wood, plain framed, paneled shutter of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge.
Supply and Fixing Ist class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engr-in-charge.
Supply and Fixing mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0 complete all as specified and directed by Engr-in-charge.
Supply and Fixing 100 mm Butt hinges, mild steel, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed by Engr-in-charge.
Supply and Fixing 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed by Engr-in-charge.
Supply and Fixing 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 200mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 150 mm long aluminium anodized barrel tower bolts of extruded sections as fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 150 mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed in repairs complete all as specified and directed.
Supply and Fixing for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floorcomplete all as specified and directed by Engineer-in-Charge
Supply and Fixing 150mm extruded aluminium alloy handles, cast type as fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 150mm extruded aluminium alloy handles, cast type as fixed in repair complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 100mm extruded aluminium alloy handles, cast type as fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 100mm extruded aluminium alloy handles, cast type as fixed in repair complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs prelaminated 12mm thick particle board exterior grade prelaminated both sides with decorative choice lamination fixed with screws to timber/ metal frame work in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete complete all as specified and directed by Engineer-in-Charge
Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site complete all as specified and directed by Engineer-in-Charge
Supply and Fixing aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and directed by Engineer-in-Charge
Supply and Fixing aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs 4 mm thick bakelite sheet with decorative choice laminated on both side completion as complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and directed by Engineer-in-Charge
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof /wall coverings complete all as specified and directed by Engr-in-charge.
Supply and Fixing pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed by Engineer-in-Charge
Supply and Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge
Supply and Fixing Mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins,vertical post,plates,pipes where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc fe 410-W (gde-E-250) quality A complete all as specified and directed by Engineer-in-Charge
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge
Supply and fixing Mild Steel framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balastures, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparing new or previously untreated surface of steel of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge
Sri Tirupati Enterprises
jalandhara construction
SAI SIDDHI CONSTRUCTION
MADHU ENTERPRIZES
Ganesh Enterprises
SACHINENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .