GE/CHM-73/2022-2023 REPAIR AND MAINT OF HQWC, COMPAD, COMMAND OFFICER MESS AND SPORTS COMPLEX UNDER AGE B/R II AT CHANDIMANDIR

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed

Ceramic coloured tiles 8 to 10mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per serial item No 02 herein before but on vertical surfaces as skirting over 10mm thick rendering back coat in cement mortar 1:4 –ditto-

Vitrified coloured double / ultra charge tiles 8-10mm thick (square / rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per serial item No 04 herein before but on vertical surfaces as skirting over 10mm thick rendering in cement mortar 1:4 –ditto-

Glazed ceramic tiles, coloured in vertical surface 300mm x 450mm x 7mm, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Granite slab 16 to 18mm thick (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed steps, jambs, pillars, window-cills, cooking platforms and like and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 15mm thick in cement mortar 1:4including cutting / rounding of edges where requried including demolition of old tile complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified & directed.

Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) complete all as specified & directed.

Flush shutters 35mm thick factory made solid core construction with block board core and ply wood face panels commercials type on both side complete all as specified & directed.

Solid PVC frame (Single Rebated) of size 75mm x 50mm made out of solid PVC foam with homogenous fine cellular structure density 750 Kg/Cum having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) (brown / coffee colour), with 2, 4 or 6 raised panel design ,solid PVC foam with homogenous fine cellular structure density 550 Kg/ Cum having smooth outer integral skin, supplying & fixing in frame at site complete all as specified and directed.

Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, complete all as specified.

Anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, complete all as specified.

Aluminum alloy, anodized, sliding door bolt 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed.

150mm long aluminum handle cast type anodized , complete all as specified

150mm Brass handles, cast type, polished bright complete all as specified and directed.

Door closer hydraulically regulated brass (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, fixed as in repairs, complete all as specified and directed.

Hacking out old broken glass ( any thickness) size quality etc from metal frames fixed with pin, beading or oil putty complete all as specified and directed.

3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply only 4.8mm thick tinted sheet glass one side frosted fixed to aluminum frame work with standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Sqm in each pane, complete all as specified & directed. Note : Rate of anodized aluminum bead, rubber packing, included in this item and shall be paid under respective items.

Plain, galvanised, 0.63mm mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

4.8mm thick sheet glass, ordinary quality and glazing in squares not exceeding 0.5 Sqm in each pane fixed to aluminum frame work complete all as specified & directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified & directed by Engineer-in-charge.

Wooden laminated flooring with bruce locking system having surface abrasion class AC-3 and density 920 Kg per Cum, of size 1215mm x 194mm x 8mm thick having fire rating class B1, fixed as in repair complete all as specified and directed. MAKE : ARMSTRONG/ VISTA / PERGO

Solid PVC wall lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

Material and labour 5mm thick PVC sheet fillet of width 35mm for wall and fixed to wall by means of rawl plugs to make PVC Frame as per specification complete all as specified and directed.

False ceiling with powder coated exposed Gl grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exc 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmx600mm. Grid of modular size 600mm x600 mm shall be supported by 4mm dia Gl wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fibre cement designer ceiling board (Density>1200 Kg/Cum) of size 595mmx 595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part-4, 5, 6,7 & 8, fixed as in repair complete all as per manufacturer's instruction. (Make:- Everest or equivalent as approved by GE)

False ceiling of Everest designer boards of size 595mm x 595mmx4mm thick fixed on existing GI snap grid, fixed as in repair complete all as specified and directed.

2nd class hard wood plain fillets square, rectangular or triangular in section, wrought, secured with nails or brads, cross sectional area exceeding exceeding 3 Sqcm but not exceeding 6 sqcm complete all as specified & directed

6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed

Supply and fix 1.5mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified & directed by Engineer-in-Charge.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre fixed as in repair complete all as specified and directed.

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to round and any sunk and raised moulding surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed.

Electronic sensor pillar tap for automatic wash hand basin, battery operated, including all battery arrangement fixed as in repair complete all as specified and directed.

Electronic sensor with machine for automatic urinal flush system, battery operated, including all battery arrangement fixed as in repair complete all as specified and directed

Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repairs complete all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.

15mm thick rendering cement plaster in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Applying wall care putty, two coats to entire surface not less than 2mm thick, over a coat of alkali resistant cement based primer on wall surfaces & smoothening the surfaces with sand papers etc., (preparatory to OBD/ plastic emulsion/ interior/ exterior emulsion paint as directed) complete all as specified.

Applying two coats of oil bound distemper on newly plastered wall surface complete all as specified and directed.

One coat of exterior emulsion including preparation of old wall surfaces complete all as specified and directed.

preparation of old surfaces of ceiling and applying one coat of oil bound distemper, complete all as specified and directed

Two coats of plastic emulsion including preparation of old wall surfaces complete all as specified and directed.

Preparation of old decorated wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.

15mm thick rendering in cement mortar 1:4 mixed with WPC on fair faces of brick wall or on concrete surfaces and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

Brick work with sub class ‘B’ bricks of old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Wash hand basin, vitreous china, flat back , white of size 550X400mm, with angle bracket and rag bolts fixed as in repair complete all as specified and directed.

PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for pedestal/squat pattern WC, fixed as in repairs complete all as specified & directed.

Vitreous china, wash down water closet pan, superior white, Pedestal pattern WC with ‘P’ or ‘S’ trap, and connecting to out let pipe fixed as in repairs complete all as specified & directed.

Pillar tap with aerator 15mm bore, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repairs complete all as specified and directed.

Angular stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions fixed as in repair complete all as specified & directed.

Urinal spreader, cast copper alloy chromium plated, including chromium plated pipe, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed

Bib taps brass, fancy type, short body, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

Double action floor spring of size 300mm x 200mm hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed as in repair complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore from walls, floors etc complete all as specified and directed (cutting chases and making good shall be measured and paid separately).

All as per item No. 60 hereinbefore but 20mm dia –ditto-

Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including tank nipple, fixed as in repair complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning works etc and hoisting if required reconnecting and refixing in position of capacity exc 500 ltrs but n.exc 1000 ltrs, complete all as specified & directed.

1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including tank nipple, fixed as in repair complete all as specified and directed.

Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed as in repair complete all as directed by Engineer-in-charge.

Repair to existing aluminium door including taking down, dismantling of aluminium member if required, rejointing and refixing to door frame complete, all as specified and directed by Engineer in charge.

Cleaning of 04 Nos glass windows of size 2.75 x 2.10m each at a height of 35 metre to 40 metre includuing all necessary chain pulley or scaffolding to external face including necessary safety arrangement, manually or mechanically complete all as directed by Engineer in charge.

Powder coated aluminum sections as in frames/ shutter of doors/window/ventilators /partitions, (Sliding / openable) including joinging cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. complete all as specified and directed Note : (i) Minimum thickness of power coating shall not be less than 50 micron. (ii) Weight of aluminum section only shall be measuerd and paid. (iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws . (iv) The rate shall be inclusive of neoprene beadings, snap beading, screws, locking roller in case of sliding shutters, arrangement etc. Weight of fitting fixtures will bot be measured for arriving the weight of aluminum section. (v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items. (vi) Design as directed by Engineer in charge.

Central hole basin mixer (Premium Quality) single Lever tall boy with 150mm extension Body & 600mm Long Braided Hoses cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. MAKE : Jaquar Cat Part No LYR-CHR-38005B equivalent in Appx 'C'

Vitreous china, pedestal type, wall mounted one piece compoite closet type, pastel colour including seat cover complete all as specified and directed. MAKE : HINDWARE Cat Part No 92088(Element), Colour : Pastel or equivalent in CERA / PARRYWARE

Vitreous china, table top wash hand basin, pastel colour including waste coupling and waste pipe complete all as specified and directed. MAKE : HINDWARE Cat Part No 91036 (68 x42) Cornice or equivalent in CERA / PARRYWARE

100mm bore cast copper alloy chromium plated grating fixed as in repair complete all as specified and directed.

French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

Demolition of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.

15mm thick screed on roof surfaces including flashings and junction of parapets etc in Cement and Sand mortar 1:4 including using of WPC complete all as specified and directed Note :- WPC will be measured & paid separately as supply only).

Material and labour 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying two coats of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.

Supply only Doctor Fixit water LW +water proofing compound Complete all as specified and directed.

50mm wide teak wood T/End profile fixed with headless nails complete all as specified and directed.

6 to 8mm hollow PVC panelling of approved design and texture approved by GE, fixed with screw to frame as in repair complete all as specified and directed.

DH 95, 300mm extruded brass antique handles, fixed as in repair compelte all as specified and directed.

D type, 300mm SS handle for toughened glass door, fixed as in repair compelte all as specified and directed.

Fabricating of monkey meanace with 10 Nos spikes (05 Nos each side) in GI sheet (size of sheet 400mm x 150mm 0.5mm) including providing of 02 Nos holes for fixing to PVC tank with nut bolts complete all as specified and directed.

M/S Dhanpati Construction

M/s Krishan Aggarwal