REPAIR/REPLACEMENT AND MAINT OF SEWAGE LINE, MANHOLES INCL ATTENDING DAY TO DAY COMPLAINTS, CERTAIN OTHER MISC B/R WORKS OF DRAINS, BOUNDARY WALLS, FENCING AT 35 INF BDE, 227 FD WKSP, 16 KUMAON AND 18 GRENEDIERS UNDER GE (SOUTH) DELHI

Amount

Cleaning of sewage lines upto 300 mm bore by super sucker machine with water jet pressure, the sucked wastage material will be collected in tanker and disposed off out of MoD land . All T&P will be provided by contractor including water for pressure jet cleaning to the entire satisfaction of GE and testing by pouring water from manhole to manhole, the sludge deposited in sewage line shall be fully cleaned and disposed off the same outside the MOD land at any distance and with any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipment and with strict supervision complete all as specified and as directed. Notes:- (a) The tenderer shall engage the above mentioned T&P and intimate to Engr-in-Charge in writing with machine No/Vehicle No etc for their record and prior approval. (b) The T&P as and when brought by the tenderer based on site requirement,the concern site executive shall take a photograph of machine alongwith the supervising staff i.e JE's and contractor's rep etc. and shall kept in record with date. (c) A pucca bound register shall be maintained showing the machine No/Vehicle No and their deployment at site mentioning time and date duly signed by concern JE, Engr-in-Charge and contractor and the same register shall be produced while claiming the payment by the tenderer.

Dewatering/desilting of existing manholes of depth not exceeding 3.0 m depth of manhole. The cleaning shall be carried out with mechanised operation by means of diesel / electric operated vehicle mounted hydraulic operated high pressure suction - cum- jetting machines fitted with pump of required requisite capacity and the sludge sucked out with Super Succer Machine.The sludge deposited in manhole shall be fully cleaned and disposed off the same outside the MOD land at any distance and with any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipment and with strict supervision complete all as specified and as directed. Notes:- (a) The contractor shall engage the above mentioned T&P and intimate to Engr-in-Charge in writing with machine No/Vehicle No etc for their record and prior approval. (b) The T&P as and when brought by the contractor based on site requirement,the concern site executive shall take a photograph of machine alongwith the supervising staff i.e JE's and contractor's rep etc. and shall kept in record with date. (c) A pucca bound register shall be maintained showing the machine No/Vehicle No and their deployment at site mentioning time and date duly signed by concern JE, Engr-in-Charge and contractor and the same register shall be produced while claiming the payment by the tenderer.

Taking out muddy/ sewage water from manholes, soakage pit/ septic tanks of any size, depth and capacity by using of mechanical sewage/ mud water disposal pump set and dispossed off muddy/ sewage water in a closed container vehicle to a distance outside MD land complete all as specified and as directed. Note:- All labour and T&P i.e. sewage water pump set, diesel, transportation of pump set from one place to other place, suction pipe, delivery pipe and manpower, prepair approach to working site/ point etc required for above work, shall be deemed included in unit rates quoted by the contractor and nothing extra shall be admissible on this account.

Cleaning of existing rain water drain pipes 150 mm to 300 mm bore at any depth by rodding manually/ mechanically as required at site from manhole and well finishing after cleaning including getting out sludge if any and liquid materials from connecting manholes deposited in lines removing the solid and sludge to any distance place outside the defence land at their own cost and refixing manhole covers etc, the cost of removal shall be included in the quoted rate complete all as specified and as directed.

Removing blockage including cleaning of PVC/ CI pipe upto and including 150 mm bore from kitchen/ bath/ wash hand basin/ urinal/ WC of any length upto gulley trap by rodding/choke remover manually or otherwise including removing & refixing of oval access door cover (up to 6.00mtr hight) complete all as specified and as directed.

Removing blockage including cleaning of RCC/SGSW / PVC/ CI pipe upto and including 150 mm bore in any length from gulley trap to 1st manhole by rodding / choke remover, manually or otherwise including removing & refixing manhole covers of 1st manhole complete all as specified and as directed.

Removing blockage including cleaning of RCC/SGSW pipe upto and including 300mm bore line onward to 1st manhole by rodding / choke remover, manually or otherwise including removing & refixing manhole covers of manhole complete all as specified and as directed.

Site clearance soft loose soil including clearing away all grass vegetation, saplings,shrubs, brushwood, undergrowth,roots,and trees not exceeding 30 cm in girth (measured at a height of one meter above ground level) and removing entire rubbish out side MOD land complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & as directed.

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5 m but not exceeding 3.00 m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & as directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concerete complete all as specified & as directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in benching/ channels of manholes etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (20 mm graded crushed stone aggregate) as in coping including necessary form work complete all as specified and as directed.

M&L for DWC HDPE SN-8 sewage pipe of bore 200 mm laid and jointed including all fittings and fixture, laid in trenches and jointed in cement mortar as specified complete with collars complete all as specified.

M&L for concrete bed to 200 mm bore DWC HDPE pipe 1:4:8 type D-2 (using 40 mm graded crused stone aggregate) as in including packing under and haunching against the side of pipe after they are laid and tested complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm soft/loose soil complete all as specified and as directed.

Removing excavated material/soil not exeeding 50 m and deposting where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

Plugging minor leakages of SGSW/ RCC pipes 150 mm bore to 300 mm bore pipes by carefully detecting leakage, cleaning outer surface of pipes and plugging with cement mortar 1:2 and/ or PCC 1:2:4 Type B-1 including rubber packing as required at site all as specified and as as directed. (Note:- Excavation, returning filling & removal of surplus soil shall be measured and paid for separately under respective Items).

S&F in repair factory made FRP gully trap cover with locking arrangement commercial grade having loading capacity 2.5 toneof size 300 x 300 mm with frame set in cement mortar 1:4 complete all as specified and as directed.

M&L for brick work using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius in cement mortar (1:6) including demolition of existing brick work in any position/any type and in any shape complete all as specified and as directed.

M&L for 15 mm thick rendering with ready mix plaster on brick or concrete surfaces finished even and smooth without using extra cement, levelling the surface, curing etc complete all as specified and as directed.

M & L for factory made precast M-30 concrete saucer drain of 600 mm high 300 mm wide and 100 mm thick set in cement mortar 1:4 including necessary earthwork/demolition of existing PCC drain etc complete all as specified and as directed.

S&F galvanized, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. including taking down of old barbed wire any type complete all as specified and as directed. (Each line wire to be measured)

All as per item No 23.00 here-in before but except barbed wire (retraining resecuring including making good staples etc)

S & F for razor punched tape Concertina coil of dia 600 mm (before stretch) 55 turn per coil and after expanding the effective coil length 10 m running length per coiland appx weight of each coil is 9 kgs, the coil wire should be min 250 GSM GI wire of dia 2.90mm wire with 0.4 mm thick 250gsm GI punched tape with 3 clipping points and GI clips including dismantling of existing concertina coil of any dia, any type and in any position complete all as specified and as directed.

M&L preparation of old steel surface for exc 10 cm width or girth etc and applying one coat of synthetic enamel paint over a coat of red oxide exc complete all as specified and as directed.

M&L for preparation of old decorated wall surfaces by c applying one coat of cement base paint, white or tinted complete all as specified and as directed.

M&L for reinforced cement concrete type 1:2:4 using (20 mm graded stone aggregate) as in fins, fascias, louvres, parapets, and railings, newels, balustrade, and the like including demolition of reinforced cement concrete of any description and in any position (incl RCC post/colum/pillar) not otherwise specially provided for including cutting of reinforcement to facilitate demolition complete all as specified and as directed.

S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete all as specified and as directed.

S&F 8 mm dia TMT bars, cut to length bent to shape required including cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and as directed.

M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished surface of concrete complete all as specified and as directed.

M&L for granite (of any type, any colour, any design) work, 16-18 mm thick (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms and like in floor and 15mm thick rendering/screed in cement mortar 1:4 as in vertical surfaces including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling existing stone slabs, and tiles of any discription or in any position complete all as specified and as directed.

M&L for 15mm thick rendering with ready mix plaster on brick or concrete surfaces finished even and smooth without using extra cement, curing etc including taking down existing cement plaster from brick/concrete surfaces complete all as specified and as directed.

M&L for preparation of newly plasered surfaces of walls and applying two coat of cement based paint over a coat of alkali resistant primer, complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.50 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil not exceeding 50 m and making good the surface in any type of soil complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, any size or any type including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

M & L for Cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in filling and mass concrete including form work complete all as specified and as directed.

S&F mild steel work in post or struts in fencing including cutting tops to shape as mitred, drilling holes, notching for wire etc , flat iron fillets for securing wire mesh etc.) including all necessary driliing, bolting or roveting etc and similar work confirming to Fe 290 Gde E-165, complete all as specified and as directed.

S & F mild steel screw bolts 11 to 15 mm dia of neck (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 cm long complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh size and type and type of standards, rails, straining bolts etc dismantling of existing fencing of any type and in any position complete all as specified and as directed.

Supply only MS galvanished chain link fencing with 3.80 mm dia wire and aperature size 50 mm x 50 mm including line wires including strain bolts, binding wire etc complete all as specified and as directed.

S & F 25mm thick 100% Solid WPC ( Wood polymer Composite ) JALI of required size comprising of virgin PVC resin of K Value 58-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/Cum complete all as specified and as directed.

S&F in repaire 75mm thick (any size of cover slab) factory made SFRC manhole cover size with 1mm thick MS sheet frame all around edges of cover slab set in cement mortar 1:4 including demolition of existing unserviceable cover slab and removal from site complete all as specified and as directed.

M&L for factory made pre cast machine pressed, glossy finished chequered cement concrete tiles 30cmx30cmx(22-25)mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment with 20 mm thick screed bed are bedding layer of cement mortar (1:4) for laying floor finishes including dismantling of existing tiles of any description of in any position complete all as specified and as directed.

S& F facory made coloured glossy finish interlocking cement paver block, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with,topping of cement mixed with imported pigment, laid over 40 mm thick sand cushion and joints filled with sand including dismentling of existing tiles of any description or in any position complete all as specified and as directed.

S& F facory made coloured glossy finish interlocking cement paver block, any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with,topping of cement mixed with imported pigment, laid over 40 mm thick sand cushion and joints filled with sand including dismentling of existing tiles of any description or in any position complete all as specified and as directed.

M&L for cement concrete type B-0, 1:2:4 using 12.50 mm graded stone aggregate as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and as directed.

S&F 12 to 15 mm thick heavy duty parking tiles of any colour, any pattern any desing as approved by GE, area of each tile exceeding 0.04 Sqm but not exceeding 0.36 Sqm as in floors/landing/steps/riser/parking/footpath etc and over & including 15mm thick screed bed or bedding/rendering layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles including dismantling of existing tiles of any description complete all as specified and as directed

M&L for cement concrete type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed.

M&L for continous road edging with factory made pre-cast cement concrete blocks (1:3:6) using 20 mm graderd crushed stone aggregate, blocks exceeding 10 cm thick with plain fair faces with or without chamferred edge and setting and jointing in cement mortar 1:4 including necessary excavation in hard/dense soil, tamping ground around blocks and removal of surplus soil to a distance not exceeding 50 metre, complete all as specified and as directed.

M&L for preparation of existing kerb stone concrete/brick surfaces of any description over 10 cm width or girth and one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of newly kerb stone concrete/brick surfaces of any description over 10 cm width or girth and applying applying two coat of synthetic enamel paint over one coat of primer complete all as specified and as directed.

M/S GOPAL JEE SINGH (BID ID -3363313)

P R Constructions (BID ID -3362846)