Loading…
Loading…
Tender Value
₹59.2 L
EMD Value
₹1.2 L
Closing Date
31 Aug 2026, 3:00 pm4d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECTRICAL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Balance sheet for the 4th previous year as para 10.2 of GCC-2022 shall be considered in evaluation of financial eligibility criteria only when it is clearly certified in Annx.-VI B or a self-declared certificate duly signed by chartered accountant and the tenderer that the balance sheet of last financial year has not been audited/ yet to be prepared.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Definition of similar work: "Satisfactory execution of any electrical work related to HT/LT installation".
44 conditions · 8 needing a document upload
Please furnish documents in support of your claim to fulfill the eligibility criteria as mentioned in the tender documents. Each page of the copy of documents / certificates in support of credentials, submitted by the you, shall be self attested / digitally signed by the you or authorized representative of the your firm. Only those documents which are declared explicitly by you as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating the offer or otherwise available in the offer
No deviation shall be accepted, in case of deviation in any term and condition in tender documents offer will summarily be rejected.
Requisite documents proving technical eligibility criteria and financial eligibility criteria has been uploaded along with those required as per explanation given in clause 10 of IRGCC-2022 (Works Matter).
All requisite valid documents regarding constitution of business of the bidding firm should be submitted along with the tender as per clause 14 of IRGCC 2022 (Works Matter),otherwise their offer will be considered incomplete and shall not be considered.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate. Reference: para 15 of IRGCC-2022 (Works matter),otherwise their offer will be considered incomplete and shall not be considered.
Partnership firms, if bidding for the instant tender, should submit all valid requisite documents and fulfill the stipulations as per clause 18 of IRGCC-2022 (Works Matter),otherwise their offer will be considered incomplete and shall not be considered.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit your Bank details such as Name of the Bank along with Bank Branch code, account No., IFSC Code and PAN Number etc along with offer
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
All the bidders / tenderers should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law ( Ref - Railway Board letter No.2008/RS(G)/777/1 Dated - 29/5/2017 )
GCC 2022 for works Contract
he Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids. iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to Sr.DEE/G/PRYJ, DRM office Nawab Yusuf Road, Prayagraj-211001. viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may be encountered in course of execution of work.
Tenderer should see the website for the corrigendum/addendum to the NIT/tender document, if any that may be uploaded prior to tender opening (inclusive) as there will not be any separate communication for that.
The tenderer for carrying any construction work in Uttar Pradesh must get themselves registered from the registering Officer under Section - 7 of the Building and Other Construction Workers Act, 1996 and rules made there-to by the Uttar Pradesh Govt. and submit certificate of Registration (Labour Department). For enactment of this Act, the tenderer shall be required to pay cess @ 1% of cost of construction work to be deducted from each bill.
The contractor(s) shall observe all the formalities, perform all the acts and abide by all the provisions contained in the Contract Labour Act-1970 and Contract Labour Central Rules, 1971 which in addition to other stipulations provides that the contractor(s) shall obtain license(s) from appropriate licensing officer of the area before commencement of the work and shall produce a copy thereof along with the original to the Railway office, which will be returned to the contractor after verification.
If any complaint is received against the contractor regarding violation of contract laws, (exposing Principal Employer to the risk of legal proceedings under labour laws), the guilty contractor will be black listed and their contract shall be terminated following the due procedure, apart from initiating criminal proceedings against him with the help of Labour department officials. (Authority: RB letter no.2008/E (LI)/AT/CNR/3, dated 24.01.2018).
The tenderer has to submit necessary documents in compliance of clause 10 to 18 (Part-I) of IRGCC 2022 (Works matter) mandatorily, otherwise offer will be considered as Incomplete Offer and accordingly shall not be considered.
It is the responsibility of the tenderer to see corrigendum, if any, to tender notice up to the date of tender opening. IRGCC-2022 (works matter) is for reference only. Any correction issued by competent authority up to date of opening will be applicable. Tenderer should quote accordingly.
Railways reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning the reason for any such action.
It is to be noted that tenderer digital signature on the E-Tender form will be considered as confirmation that tenderer have read and accepted all the conditions laid down in the documents as well as related specification of items, schedule & quantity of items in the tender, consisting of techno-commercial offer form (including special conditions attached to E-Tender) and Financial offer form.
The quantities shown in the attached Schedule are given as a guide and are approximate only and are as a guide to give the tenderer(s) an idea of quantum of work involved. Quantities are subject to variation according to the needs of the Railway. The Railway does not guarantee work under each item of the Schedule. The Railway reserves the right to increase/ decrease and/or delete or include any of the quantities given above and no extra rate will be allowed on this account.
In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Earnest Money Deposit besides banning of business for a period of upto five years. In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Earnest Money Deposit (EMD), Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto five years.
Balance sheet for the 4th previous year (i.e., FY 2021-22 or as applicable for the instance tender) as per para 10.2 of GCC-2022 and para 13 of Special condition of contract of tender document shall be considered in evaluation of financial eligibility criteria only when it is clearly certified in Annex-VI B or a self-declared certificate duly signed by chartered accountant and the tenderer that the balance sheet of last financial year (i.e., FY 2024-25 or as applicable for the instance tender) has not been audited/yet to be prepared.
Electrical work in connection with the work of "Etawah - Construction of 06 units. Type-II staff quarters in lieu of abandoned qtrs. at Etawah under ADEN/ETW.".Electrical work in connection with the work of Mainpuri: Raising of Platform no. 2/3 up to high level for recoupment of shortfall in Minimum Essential Amenities (MEA) at MNQ under SKB-FBD section.Electrical work in connection with the work of "Provision of all balance facilities for divyangjan at SB, MNR, EKL & JGR under Ambiapur- Tundla section."
ELG-45-2627~NCR
ELG-45-2627
Open
Works - General
6 Months
Prayagraj, Uttar Pradesh
₹0
₹1.2 L
7 Aug 2026
7 Aug 2026
17 Aug 2026
82 items across 1 schedule · ₹59,22,954.05 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply and recessing/fixing of PVC Conduit pipe 2 5 m m (Medium) conforming t o IS 9537/ Part I I I / 1 9 8 3 ( L a t e s t v e r s i o n ) with accessories,junction box , e t c including making chase, plastering/ clamping etc as per technical specifications.Inspection by- Consignee. | Metre | 1400.00 | 47.22 | 66,108 |
| 2 | Supply o f P V C insulated multi stranded copper conductor single core FRLSH cable 2.5 S q . mm conforming t o I S : 6 9 4 (latest version), and drawing i n laid (recessed /surface) P V C conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main a s r e q u i r e d a s p e r technical specification including connections, testing and commissioning.Inspection by- Consignee. | Metre | 900.00 | 23.55 | 21,195 |
| 3 | Supply o f P V C insulated multi stranded copper conductor single core FRLSH cable 4.0 S q . mm conforming t o I S : 694(latest version), and drawing i n laid (recessed /surface) P V C conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main a s r e q u i r e d a s p e r technical specification including connections, testing and commissioning.Inspection by- Consignee. | Metre | 1000.00 | 36.37 | 36,370 |
| 4 | Supply o f P V C insulated multi stranded copper conductor single core FRLSH cable 6.0 S q . mm conforming t o I S : 6 9 4 (latest version), and drawing i n laid (recessed /surface) P V C conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main a s r e q u i r e d a s p e r technical specification including connections, testing and commissioning.Inspection by- Consignee. | Metre | 800.00 | 50.19 | 40,152 |
| 5 | Supply o f P V C insulated multi stranded copper conductor single core HRFR cable 1.5 S q . mm conforming t o I S : 6 9 4 (latest version), and drawing i n laid (recessed /surface) P V C conduit pipe for Earth wire as required a s per technical specification including connections, testing and commissioning.Inspection by- Consignee. | Metre | 1000.00 | 15.22 | 15,220 |
| 6 | Supply, Erection, Testing and Commissioning of following Modular Type switch 1 0 A (1-way) c o m p l e t e i n a l l respect. Inspection by- Consignee. | Numbers | 100.00 | 64.99 | 6,499 |
| 7 | Supply, Erection, Testing and Commissioning of following Modular type Plug socket outlet 2/3 Pin 1 0 A complete in all respect. Inspection by- Consignee. | Numbers | 25.00 | 107.45 | 2,686.25 |
| 8 | Supply, Erection, Testing and Commissioning of f o l l o w i n g M o d u l a r Type switch 20 A (1- way)complete i n all respect.Inspection by- Consignee. | Numbers | 20.00 | 132.59 | 2,651.8 |
| 9 | Supply, Erection, Testing and Commissioning of following Modular type Plug socket outlet 5/3 Pin 2 0 A complete in all respect.Inspection by- Consignee. | Numbers | 20.00 | 153.37 | 3,067.4 |
| 10 | Supply a n d Erection o f Modular t y p e switch blanking set to fill the blank space White finished m o u n t i n g c o v e r p l a t e c o m p l e t e in all respect.Inspection by- Consignee. | Numbers | 20.00 | 7.86 | 157.2 |
| 11 | "Supply and Erection o f Junction Box cover POP type complete in all respect including hardware material for fixing. Inspection by- Consignee." | Numbers | 50.00 | 5.23 | 261.5 |
| 12 | S u p p l y a n d Erection o f w h i t e fi n i s h single mounting cover plate with base frame suitable 3 module suitable f o r mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. Inspection by- Consignee. | Numbers | 20.00 | 69.33 | 1,386.6 |
| 13 | S u p p l y a n d Erection o f w h i t e fi n i s h single mounting cover plate with base frame suitable 8 module suitable f o r mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. Inspection by- Consignee. | Numbers | 15.00 | 146.45 | 2,196.75 |
| 14 | S u p p l y a n d Erection o f w h i t e fi n i s h single mounting cover plate with base frame suitable 12 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. Inspection by- Consignee. | Numbers | 10.00 | 211.44 | 2,114.4 |
| 15 | Supply a n d Erection o f Modular Metal boxes concealed Boards suitable for mounting o f 3 module white finish single mounting cover plate w ith Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes a r e t o be concealed i n w a l l . Inspection by- Consignee. | Numbers | 20.00 | 45.48 | 909.6 |
| 16 | Supply a n d Erection o f Modular Metal boxes concealed Boards suitable for mounting o f 8 module white finish single mounting cover plate w ith Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes a r e t o be concealed i n w a l l . Inspection by- Consignee. | Numbers | 15.00 | 79.73 | 1,195.95 |
| 17 | Supply a n d Erection o f Modular Metal boxes concealed Boards suitable for mounting o f 12 module white finish single mounting cover plate w ith Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes a r e t o be concealed i n w a l l . Inspection by- Consignee. | Numbers | 10.00 | 128.24 | 1,282.4 |
| 18 | Supply and Installation of Ceiling rose 3 plate as p e r I S N o . 371/1999 (Latest Version) including connections, Testing and commissioning a s per Tech. Specification. Inspection by- Consignee. | Numbers | 500.00 | 15.12 | 7,560 |
| 19 | Supply and recessing/fixing on surface of 6 SWG G I w i r e conforming t o I S : 280/2006 (Latest Version) f o r l o o p e a r t h i n g as required for earthing of installation a s per IE Rule.Inspection by- Consignee. | Metre | 1400.00 | 9.54 | 13,356 |
| 20 | Fabrication, S u p p l y a n d Fi x i n g o f F a n Hook withclamp duly painted madeof 5 0 x 6 mm MS F l a t w i t h n u t b o l t s s u i t a b l e t o fi x o n PP shelterbracing angle a s required. Inspection by- Consignee. | Numbers | 70.00 | 103.72 | 7,260.4 |
| 21 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 3 5 0 RPM (tolerance a s per I S : 374-2019), THD less than 1 0 % , remote or electronic regulator u n i t for s p e e d control and a l l remaining accessories including safety p i n , n u t b o l t s , washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V , 5 0 Hz, single phase A C Supply, earthing e t c . c o m p l e t e a s required. Inspection by- Consignee. | Numbers | 86.00 | 2,208.91 | 1,89,966.26 |
| 22 | Termination o f LT XLPE cables o f various sizes (One Job means all 4 cores of cables). Inspection by- Consignee. | Job | 51.00 | 116.96 | 5,964.96 |
| 23 | Supply and laying of B class, 50 mm dia, GI pipe o f for cable riser/road crossing as required and a s p e r r e l e v a n t technical specification. Inspection by- Consignee. | Metre | 188.00 | 121.37 | 22,817.56 |
| 24 | Collecting, Transporting f r o m SSE/PS/ store to site, laying, testing, and commissioning of above L T c a b l e . Laying direct i n g r o u n d (Including excavation, sand cushioning, protection brick covering and refilling the trench etc.), direct in RCC/Metal pipes i n rod/track crossings and on surface/required i n w all/in concrete floor by c u t t i n g r e c e s s e d a n d finished originally as required as per relevant technical specifications. | Metre | 6600.00 | 63.91 | 4,21,806 |
| 25 | Drilling o f bituminous road/track and laying charges of cable in road crossing for laying 110 mm dia HDPE pipe through it. | Metre | 700.00 | 274.81 | 1,92,367 |
| 26 | Supply a n d laying o f HDPE Pipes (Upto PN 8.0 Pressure Rating Material Grade: P E 63, Pressure Rating: PN 8.0, Nominal Dia(mm):110) as per IS- 4984:2016 suitable for HT/LT XLP E cable & as r e q u i r e d a n d a s per relevant technical specification. Inspection by- consignee. | Metre | 800.00 | 247.32 | 1,97,856 |
| 27 | S u p p l y , fi x i n g , t e s t i n g , c o n n e c t i n g and commissioning o f 3 0 0 m m sweep Exhaust Fan suitable f o r 230 volts, 5 0 H z A C supply, 1400 RPM heavy duty with wiring and flexible PVC pipe as required. Inspection by Consignee. | Numbers | 26.00 | 1,565.53 | 40,703.78 |
| 28 | Design, Manufacturing, Supply, Erection, testing and commissioning of LT switchgear panel board of 02 mm Tk. Dia pressed CRS steel sheet panel shall be treated for anti corrosion treatment and finished with smoke gray paint as per technical s p e c i fi c a t i o n no. Sr.DEE/G/ALD/Panel-94/113 Comprising with as under: MCCB of 400 A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 400 Amp. | Numbers | 5.00 | 14,761.41 | 73,807.05 |
| 29 | MCCB of 125A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4Pole current rating 125 Amp. | Numbers | 8.00 | 6,423.54 | 51,388.32 |
| 30 | MCCB of 63A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 63 Amp. | Numbers | 13.00 | 3,114.3 | 40,485.9 |
| 31 | Supply of Indicator lamps with suitable holder. | Numbers | 75.00 | 78.87 | 5,915.25 |
| 32 | Supply, fixing, testing, connecting and c o m m i s s i o n i n g o f O u t g o i n g / Fe e d e r Panel Mounted Multi-function Mtrs. with Accuracy Class 1 as per IEC 62053-21 or Class 0.5, 0.5S a s per I E C 62053-22.LED Mtrs. C l 1 with RS485: Mtrs. should have following features built-in L E D • Flush mounting 9 6 x 9 6 m m • Tr u e RMS measurement • Password protection provision for security • Site selectable for 3 Phase 4 wire, 3 Phase 3 wire, 1 Phase, CT Secondary 1A/5A, Universal Auxiliary Supply 80-300 VAC/DC, Input Voltage Measurement 50-500 VAC, 6 4 samples/ cycle T h e Mtrs. should b e able to read/display following paraMtrs.s Instantaneous ParaMtrs.s (V1, V2, V3, V12, V23, V31, Avg (VLN, VLL), A1, A2, A3, Aavg, F, PF-1, PF-2, PF-3, P F (Avg) W1, W 2 , W3, W (total) VA 1 , VA 2 , VA 3 , V A (total) Cumulative ParaMtrs.s (Import W h , Import Vah, I m p o r t l o a d h o u r s , R e s e t (old) Cumulative paraMtrs.s ( I m p o r t W h , Import load hours, Communication ( R S 4 8 5 Modus RTU).complete with all accessories. | Numbers | 25.00 | 2,500.87 | 62,521.75 |
| 33 | Fabrication works a n d insulated Aluminum bus bars of 800A capacity for phases & 800A capacity f o r neutral B u s b a r shall be suitably insulated w i t h h e a t shrinkable sleeves/ epoxy coating/insulating t a p to withstand t h e test voltage o f 2 . 5 K V Copper strip f o r connection outgoing a s well as incoming with suitable size b e provided. Item no. 28 to 33 Inspection by consignee. | Numbers | 4.00 | 44,706.74 | 1,78,826.96 |
| 34 | Supply, replacement, fixing, testing, connecting and commissioning of energy efficient luminaries complete with all accessries of capacity 18/20 watt, 4 feet length, T8 LED lamps with sutable current control potted driver circuit ,suitable for surface/recessed mounting.LED Luminaries:-(1) A complete LED lighting unit consisting of a light source and driver together with parts of distribute light,to position and protect the light source,and to connect the light source to a branch circuit.The light source itself may be an LED array and LED module, or an LED lamp. (2):- Supplied LED luminaries shall confirm to IS:16101(2012) IS :16106(2012) .Light Source (LED) in the Luminaries should be of make:- (1):- NICHIA/ CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS /LEDNIUM. (2):-LEDs to IS: 16105(2012). IS:16108(2012), IEC:62471.1.Input operating voltage :-105-295 V AC. 2:-Normal Voltage-220V AC.3.Driver type: constant current driver with short circuit protection(For tube light). 4.Control of distribution:-Full cut off. 5.Drive component :Industrial grade only .6.Efficiency of driver electronic: > 85% (For tube light).7.Colour temperature:5000-6500K(For tube light). 8.Colour rendering index(CRI):>75(For tube light). 9.Ingress protection :IP-20. 10.Lumen output: >100 lumens/[email protected] drive current(For tube light). 11.Power factor:- >0.90(For tube light). 12.Total hormonics distrotion(THD):-<20% (For tube light). 13. Lamp cover :Acrylic cover which does not result in loss of lumens. 14. Finishing:Power coated /Anodized. 15.Secondry optics:poly corbonate reflector/ poly carbonate lens. 16. Construction of housing: extruded aluminum/CRCA/Pressure die cast aluminum. 17.Mounting :Suitable for surface mounting/recessed mounting. 18. Certificate: Firm to submit LM80(In respect of LED used) & LM79 (In respect of luminare used) test certificate from National/International accredited Laboratory and OEM certificate for complience of BIS/IEC. 19.Warranty:Firm to submit warranty certificate for five year along with the supply.All fittings shall be fitted as surface mounting/recessed mounting with twisted twin flexible cord of minimum size 16/0.2 mm copper conductor as per relevant technical specification. Materials praMtrs.s must remain unchanged during entire warranty period. 1x18/20 watt. Inspection by-Consignee. | Numbers | 453.00 | 313.49 | 1,42,010.97 |
| 35 | Supply, erection, testing and commissioning of One phase distribution board comprising of one no.32/40 amps DP MCB with 40 A ELCB/RCCB as incoming and 4 nos. 10 amps SP MCB, 4 nos. 20 A SP MCB as outgoing complete with copper bus bars, neutral link and other accessories housed in CRCA sheet enclosure with double door type. Inspection by- Consignee. | Numbers | 15.00 | 3,335.24 | 50,028.6 |
| 36 | "Supply, replacement, fixing, testing, connecting a n d commissioning o f 7 2 Watt or above LED s t r e e t l i g h t s fi t t i n g s a s per IS:10322. LED Luminaries:-(1) A complete LED lighting unit consisting o f a light source a n d potted driver together with parts of distribute lights,to position and protect the light source,and t o connect the light source to a branch circuit. The light source itself may be an LED array and LED module, or an L E D lamp.(2):-Supplied LED luminaries shall confirm t o IS:16101 (2012) IS :16106(2012). Light Source(LED) in the Luminaries should be of m a k e : - (1):- NICHIA/ CREE/OSRAM/SEOUL/ PHILIPS/LUMILEDS / L E D N I U M . (2):-LEDs to IS:16105(2012). IS:16108(2012), IEC:62471. T y p e LED:- High power LED,SMD(Surface Mounting device)/COB(Clip on board). 1.Input operating voltage :-105-295 V AC.2:- Normal Voltage-220V AC,3.Driver type: constant current driver with short circuit protection. 4.LED life:- > 5 0 0 0 0 burning hours. 5.Depreciation:- 30% max.after 50000 b u r n i n g hours.6.Control of distribution:-Full cut off. 7.Surge protection:4KV. 8 . D r i v e component :Industrial grade only.9.Efficiency o f driver electronic: > 85%.10.Beam angle:>=140 degree along with road and >=80 degree across the road.11.Colour temperature:5000-6500K. 12.Colour. Inspection by- Consignee." | Numbers | 128.00 | 2,556.58 | 3,27,242.24 |
| 37 | Supply and erection of 6 Mtr. Galvanized (as per BS EN ISO 1461) octagonal pole with base plate 220x220x12mm, top 70mm and bottom 130mm of 3mm thick sheet suitable for maximum wind s p e e d u p t o 160 Km/Hr. including foundation bolts and foundation with M 20 grade RCC and FE 4 1 5 g r a d e reinforcement (450x450x800 mm d e e p ) (foundation should b e a s p e r design approved b y pole manufacturer) G I base plate G . I . a n c h o r p l a t e e t c . a s required including supplying a n d fixing o f double arm h o t dipped galvanized b r a c k e t suitable for s t r e e t light fi t t i n g s a n d s u p p l y i n g and drawing of 3x2.5Sq.mm FRLS copper conductor single core cable from junction box with t w o N o s 6/10AMP MCB to luminaire complete including termination w i t h c o p p e r l u g s a s required.Inspection by- consignee | Numbers | 55.00 | 8,936.17 | 4,91,489.35 |
| 38 | Supply , erection, testing and commissioning o f s i n g l e e a r t h e l e c t r o d e of 50 m m . dia 4000mmlong GI pipe class B complete with earth b o x w i t h C I cover hinged t o C I frame includingconnection from e a r t h electrode toMDB/SDB/poles/with 8 s w g GI wire/strip as perattached drawing. Inspection by-Consignee. | Numbers | 35.00 | 2,684.14 | 93,944.9 |
| 39 | Supply, laying, fixing, testing and commissioning o f 1 0 . 0 s q m m F R L S , PVC insulated multi stranded copper conductor single c o r e cable 1100 Volts confirming to IS-694 (latest version) of approved make in the existing PVC conduit for w i r i n g o f point wiring/circuit wiring/sub main/main as per Tech Spec-I attached, I S & IE rules.Inspection by- Consignee. | Metre | 730.00 | 70.63 | 51,559.9 |
| 40 | Supply, fixing, testing, connecting and commissioning of storage t y p e w a t e r cooler similar to Model SDLX 100, Cooling Capacity-170 litre per hour, 380 or above litre Storage with foundation/platform & cage.Inspection by- Consignee. | Numbers | 5.00 | 63,725.71 | 3,18,628.55 |
| 41 | Electric P o l e cutting (Pole t o b e deposited in Consigence's office.) | Numbers | 50.00 | 583.58 | 29,179 |
| 42 | Supply, fixing, testing and commissioning of wall mounted LT distribution board made up o f steel sheet, phosphatised powder painted complete w i t h n e u t r a l link,earth point, D i n r a i l and prewired confirming to IS:13032 & 8623:1991 withfollowing items to b e fi x e d i n distribution board, confirming to IS:8828 :1996 orlatest, IE rules and site requirement. 4P, MCCB 125 Amps. 10 kA 'C' series= 01 No.(Incoming) DP RCCB (25, 40 Amps., three nos. each) 10 kA 'C' series = 06 Nos.(Outgoing). Inspection by- Consignee. | Numbers | 6.00 | 25,425.66 | 1,52,553.96 |
| 43 | Supply and instalation of 1-phase 5KVA, 120/96Volt DC input UPS with Battery Bank of 12V, 10 Nos tubular battereies of Okaya or any superior approved make each of 150AH for Emergency Supply of Metring system and sub- station lightings .After completion of the works all materials to be deposited to the concern SSEs stores. Inspection by- Consignee. | Numbers | 1.00 | 1,52,850.67 | 1,52,850.67 |
| 44 | Supply, fabricating and installing of G.I.perforated type cables trays with perforation not more than 17.5%)including suspending from ceiling with MSangle, rods connection pieces, (L pieces, T pieces, 90/45 degree any other fitting required) G.I. nutbolts, G.I. washers,fasteners etc.complete in all respects required at site andas per PCEE/NR specification at Tech Spec-I. 150 mmwide, 50mm depth 2mm thick with protective cover. Inspection by- Consignee | Metre | 300.00 | 1,383.25 | 4,14,975 |
| 45 | Supply, fixing, testing and commissioning of wall mounted LT distribution board made up o f steel sheet, phosphatised powder painted complete w i t h n e u t r a l link,earth point, D i n r a i l and prewired confirming to IS:13032 & 8623:1991 with following items to b e fixe d i n distribution board, confirming to IS:8828 :1996 orlatest, IE rules and site requirement. 4P, MCCB 125 Amps. 10 kA 'C' series= 01 No.(Incoming) DP RCCB (40 & 63 Amps., two nos. each) 10 kA 'C' series = 04 Nos.(Outgoing). Inspection by- Consignee. | Numbers | 4.00 | 20,340.53 | 81,362.12 |
| 46 | Provision of Sleek Wall Mountable Modular Mobile Charging Kiosk consisting of mobile carrying tray ofadequate capacity and 01 switch for each 08sockets of 2 pin. It has to be attached to any wall orplaced on a table. Either white or black finish. Madeup of high grade PVC or fiber- glass. Thickness offiber sheet should not be less than 2 mm. Holding tray should have load bearing capacity of 10 Kg pereight-socket. Mobile holding tray should be veryrigid, robust and transparent, scratch-proof fiber-glass material of not less than 10 mm thickness. During warranty-period if any scratch is generated, entire charging station shall have to be replaced. Each socket should be modular (Legrand, Anchor, Arkeylite, HPL, Havells only) 2 Pin type. (mountedvertically). Adequate space should be left for nextrow of sockets to start so that mobile chargers maybe fixed without any space crunch. One bottle type fuse and one LED indicator for each set of 8 socketsand one MCB of adequate capacity for complete board shall have to be provided. One switch foreach set of 8 socket is required. Dimension ofholding tray should not be more than 10 inchesdepth. However, multi-step holding may be provided with successive trays having increasing depth. Depth of entire unit should not be more than 1.5 feet after installation with trays in openposition......8 sockets x 2 row. Inspection by-Consignee. | Numbers | 16.00 | 1,568.4 | 25,094.4 |
| 47 | Design, Survey, Proposal with Technical Elevation Drawings & 3D layout, Supply,Manufacture, Erection, Installation, testing and Display of wall / hanging / floor /pole mounting type LED illuminated, Modular, Changeable Aluminium extrudedprofile signage / direction board in full/half Parabolic and Elliptical square and multiangle shape and flat, with die molded internal structural brackets (Nylon/SS) andaluminium extruded heat sink. Suitable size end cap PC/ SS304 should be providedwith provision of illuminated Logo. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2-3 mm thickness. The text / graphics mattervision angle shall not be less than 160 degree and visibility not be less than 75%.The approved color text and graphics shall be printed / router cut on monomericcalendered vinyl of 100 um thickness and shall be firmly pasted on display sheets.A pole with grooves for tricolor LED/Neon light installation. The mountingarrangement shall be hanging, wall mounting, ceiling mounting, pole mounting orfloor mounting and as per site requirement. The signage shall have the integralmounting arrangements with sturdy structural frame and ACP cladding on the backside of the signage to avoid rusting and entry of dust. The LED board shall haveuniform illumination with 4-8 W / sq. ft and with brightness more than ambientlight. It shall confirm the latest specification issued by railway board (alsouploaded). Specification to be read with explanatory Note uploaded. Inspection by- Consignee. | Square Foot | 130.00 | 2,484.87 | 3,23,033.1 |
| 48 | Supply, installation, testing, connecting and commissioning of LED base name board of different stations (01 set includes 01 No Hindi, 01 No English & 01 No Urdu name board) with power LEDs, Drivers & wiring of board. The signage board should have alphabet of vertical peak height of 600 mm and proportionate horizontal span. Approximate size of Hindi, English signage panel shall have Length 6400 mm, Height- 912 mm. Note - 01 set includes, a. Hindi board 01 No, b. English board 01 No, c. Urdu board 01 No. Inspection by-Consignee. | Set | 1.00 | 2,41,999.71 | 2,41,999.71 |
| 49 | Supply, fixing, testing and commissioning of wall mounted/recessed LT Double door 4Way distribution board made up of steel sheet, hosphatised powder painted complete with neutral link, earth point, Din rail and prewired with following items to be fixed in distribution board and site requirement. Inspection by- Consignee. | Numbers | 17.00 | 329.86 | 5,607.62 |
| 50 | Supply, fixing, testing and commissioning of wall mounted/recessed LT Double door 6Way distribution board made up of steel sheet, phosphatised powder painted complete with neutral link, earth point, Din rail and prewired with following items to be fixed in distribution board and site requirement. Inspection by- Consignee. | Numbers | 12.00 | 498 | 5,976 |
| 51 | Supply, fixing, testing and commissioning of DP RCBO's 10 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2, IEC-61009-1 or latest. Inspection by-Consignee. | Numbers | 21.00 | 2,520.12 | 52,922.52 |
| 52 | Supply, fixing, testing and commissioning of DP RCBO's 16 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2,IEC-61009-1 or latest. Inspection by-Consignee. | Numbers | 6.00 | 2,520.12 | 15,120.72 |
| 53 | Supply, fixing, testing and commissioning of DP RCBO's 20 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2, IEC-61009-1 or latest. Inspection by-Consignee. | Numbers | 6.00 | 2,520.12 | 15,120.72 |
| 54 | Supply, fixing, testing and commissioning of DP RCBO's 25 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2, IEC-61009-1 or latest. Inspection by-Consignee. | Numbers | 11.00 | 2,520.12 | 27,721.32 |
| 55 | Supply, testing and commissioning ofAuto change Over pannel for CLS 25KVA150A capacity as per RDSO specificationno.TI/ SPC/PSI/ CLS/0020 (12/02) (withA & C slip No1 to 4 ). Inspection by-Consignee. | Numbers | 2.00 | 1,42,935.45 | 2,85,870.9 |
| 56 | Erection ,Testing and commissioning ofAuto change Over pannel for CLS 25KVA150A capacity as per RDSO specification no.TI/ SPC/PSI/ CLS/0020(12/02) (withA & C slip No1 to 4 ) | Numbers | 2.00 | 5,082.16 | 10,164.32 |
| 57 | Wiring for light/fan/exhaust fan/call bell points with 1.5 sqmm (22/.3 mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked cable in recessed PVC pipe of ISI mark, MS switch box having wall thickness 16 SWG with 3 mm thick phenolic laminated sheet cover including running of 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) copper earth wire along with the pipe duly clamped as required and as per relevant technical specification No.Sr.DEE/G/ALD/IE/94/104/Rev and additional specification .a) Medium Point.Inspection by- Consignee. | Numbers | 150.00 | 205.43 | 30,814.5 |
| 58 | Wiring for 3/5 pin, 5 Amp. Plug point with 1.5 sqmm (22/.3mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked cable including providing and fixing 3/5 pin 5 Amps. Socket out let with switch on same board and earthing the 3rd pin with 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) copper earth wire etc. as required and as per relevant technical specification.Inspection by- Consignee. | Numbers | 90.00 | 55.3 | 4,977 |
| 59 | Wiring for 3/5 pin 5/15 amps plug points with 2.5 sqmm (36/0.3mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked in recessed PVC pipe of ISI marked and MS switch box having wall thickness 16 SWG with 3 mm thick phenolic laminated sheet cover including providing and fixing 3/5 pin 5/15 Amps socket outlets and 5/15 Amps piano type switch and earthing the 3rd pin with 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) Copper earth wire along with pipe duly clamped as required and as per relevant technical specification.(5pin 15Amp) .Inspection by- Consignee. | Numbers | 54.00 | 340.61 | 18,392.94 |
| 60 | Wiring for circuit with 2.5 sqmm (36/0.3mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked cable in recessed PVC pipe of ISI marked and running of 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) copper earth wire duly clamped with pipe and providing multiway connector on MS switch box for neutral looping etc. as required and as per relevant technical specification. (a) 2 x 2.5 sq mm .Inspection by- Consignee. | Metre | 600.00 | 63.49 | 38,094 |
| 61 | Wiring for circuit with 2.5 sqmm (36/0.3mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked cable in recessed PVC pipe of ISI marked and running of 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) copper earth wire duly clamped with pipe and providing multiway connector on MS switch box for neutral looping etc. as required and as per relevant technical specification. (b) 4 x 2.5 sq mm .Inspection by- Consignee. | Metre | 200.00 | 77.86 | 15,572 |
| 62 | Wiring for submain with 4 sqmm (56/0.3 mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked cable in recessed PVC pipe of ISI marked and running of 16 SWG /(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor)copper earth wire duly clamped with pipe and providing multiway connector on MS switch box for neutral looping etc. as required and as per relevant technical specification.(b) 4 x 4 sq mm .Inspection by- Consignee. | Metre | 200.00 | 97.24 | 19,448 |
| 63 | Wiring for submain with 10 sqmm PVC insulated single core unsheathed stranded Copper conductor ISI marked cable in recessed PVC pipe of ISI marked and running of 16 SWG copper earth wire duly clamped with pipe and providing multi-way connector on MS switch box for neutral looping etc. as required and as per relevant technical specification....2 x 10 sq mm.Inspection by- Consignee. | Metre | 200.00 | 154.56 | 30,912 |
| 64 | Provision of Indutrial type Plug & socket SPN distribution board with 02 pole & earth metal Plug & socket complete with 32A S.P. MCB of approved make. Inspection by-Consignee. | Numbers | 18.00 | 718.73 | 12,937.14 |
| 65 | Horizontal boring of cable duct through machine at more than 2.1 mtr depth from the bottom of pit and without DWC/GI/HDPE pipes. The work shall be done as per extent practice and instruction of site engineer. | Metre | 100.00 | 1,027.65 | 1,02,765 |
| 66 | Provision of Geyser Points having MCB 16 A S/P with 3/5 pin 5/15 amps plug points with 1.5 sqmm (22/0.3mm) / 2.5 sqmm (36/0.3mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked in recessed PVC pipe of ISI marked and MS switch box having wall thickness 16 SWG with 3 mm thick phenolic laminated sheet cover including providing and fixing 3/5 pin 5/15 Amps socket outlets and 5/15 Amps piano type switch and earthing the 3rd pin with 16 SWG Copper earth wire along with pipe duly clamped as required and as per relevant technical specification. ( 15 AMP). Inspection by- Consignee. | Numbers | 18.00 | 349.81 | 6,296.58 |
| 67 | "Supply, erection, connecting, testing and commissioning of meter cum distribution box made of FRP Sheet(White colour Rectangle box IP65, size-263mm*325mm*175mm as per lS/lEC 60529:2001 latest Safety compliances Fire retardant Class - FV-0 (as per IS:11731 Part- II),Flame proof, IIA,T6 temp. Class (as per IS/IEC 60079-0 & 1 : 2007 latest) Material (sheet) thickness (in mm) 2 Type of front cover fixing on junction box (front side) Front cover with 4 Nos. Of fastners with retainers (Staineless steel304 Gr.) No of way-2 (Bottom side), ACNumber of terminal connector on junction box 2 of 50mm, Wall Mounting as per relevant technical specification. Box should have locking arrangement with supply & providing 20 A DP MCB B curve, 10 KA breaking capacity including supply, fixing connecting and commissioning of single phase KWH energy meter having LCD display with minimum required functions i.e. Maximum demand in KW since last reset (2 Whole Digit+ 2 decimal digits) of following capacity of approved make..............(b) For type II Qtrs: One No. Single-phase KWH meter 5-30 Amp capacity. Inspection by-Consignee." | Numbers | 6.00 | 1,911.64 | 11,469.84 |
| 68 | Supply, erection, testing and commissioning of approved make standard size of followingDistribution board recessed in wall having earthterminal block and neutral terminal block to enabletermination of conductors incoming as well asoutgoing individually by screwed connections andwithout twisting complete in all respect as perrelevant technical specification......DP distributionboard of standard size confirming to technicalspecification No. Sr.DEE/G/ALD/94/104 comprisingof one No. 2 pole 32/40 Amps MCB's & 4-No SPMCB's of 6 Amps . Inspection by- Consignee. | Numbers | 6.00 | 794.92 | 4,769.52 |
| 69 | Supply of Musical Chime bell and erection on the installed MS board ,connection with twin core PVC insulated flexible copper conducor cable size 14/0.0076'' including testing and commissioning as per technical specification of approved make. Inspection by-Consignee. | Numbers | 6.00 | 41.71 | 250.26 |
| 70 | Supply, Installation and commissioning of LT XLPE insulated aerial bunched cable with Termination and connection having associated given accessories. LT XLPE insulated aerial bunched cable with bare messenger as per IS:14255-1995 up to the latest ammendments of sizes(3x50+1x35+1x16 )sqmm. inspection by consignee | Metre | 1000.00 | 172.22 | 1,72,220 |
| 71 | LT Shackle Insulator with nut and bolt. Inspection by-Consignee. | Numbers | 24.00 | 65.23 | 1,565.52 |
| 72 | Shackle Strip 12''. Inspection by-Consignee. | Pair | 24.00 | 107.72 | 2,585.28 |
| 73 | I-Hook. Inspection by-Consignee. | Numbers | 32.00 | 108.7 | 3,478.4 |
| 74 | Dead End clamp. Inspection by-Consignee. | Numbers | 8.00 | 296.47 | 2,371.76 |
| 75 | Suspension Clamp. Inspection by-Consignee. | Numbers | 32.00 | 296.47 | 9,487.04 |
| 76 | Piericing Connector 90/120 sqmm. Inspection by-Consignee. | Numbers | 40.00 | 296.47 | 11,858.8 |
| 77 | Distribution boxes with accessories. Inspection by-Consignee. | Numbers | 16.00 | 1,235.31 | 19,764.96 |
| 78 | 1x35 sqmm PVC cable. Inspection by- Consignee. | Metre | 120.00 | 69.17 | 8,300.4 |
| 79 | 1x16 sqmm PVC cable. Inspection by- Consignee. | Metre | 120.00 | 39.53 | 4,743.6 |
| 80 | Supply, carrying, loading & unloading of swaged type GI tubular pole 9.0 Mts.long, Type-410 SP- 32 having weight 154 kg, step length 5.00/2.00/2.00 Mts.having sectional outer diameter 165.1/139.7/114.3mm and sectional thickness 4.85/4.50/3.65 mm respectively as perIS:2713-1980 including suitable size base plate & cap as per direction at site Engineer. Inspection by-Consignee. | Numbers | 20.00 | 15,898.4 | 3,17,968 |
| 81 | Erection of GI tubularpole 9.0 Mts. long bycontactor ownarrangement bydigging the pit to 1/5thof the pole height withexecution of CCfoundation work of size45cmx45m in ratio1:2:4 by cement, sandand chips of size 19mm and down up-tofull depth & 1 feetabove the GL as perdirection of EngineerIn-charge at site | Numbers | 20.00 | 558.11 | 11,162.2 |
| 82 | Supply and erection of stay sets complete with 19 mm dia 1800 mm long GI stay rod, galvanized anchor plate 300 x 300 x 6 mm, stay insulator, double screwed tighter with 7/3.15 GI stay wire and provision of foundation to take the load on stay wire by 1:3:6 ratio of cement concrete and sand as per relevant technical specification. Inspection by-Consignee. | Numbers | 16.00 | 1,889.73 | 30,235.68 |
| Schedule total | ₹59,22,954.05 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
2026_03_13AdvanceCorrectionSlipNo_111.pdf
ATTACHMENT
RBLetterfore-BG.pdf
ATTACHMENT
TNDoclatest.pdf
ATTACHMENT
GCC_April-2022_27_04_22.pdf
ATTACHMENT
GCCACS2022CORRECTION.pdf
ATTACHMENT
Likelysourceofsupply.pdf
ATTACHMENT
2022_12_13RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril2022ACSNo_21.pdf
ATTACHMENT
2023_04_26RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_3ACS-31.pdf
ATTACHMENT
2023_08_07RBCE_CE-I-CTIndianRailwayStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_4ACS-4_1.pdf
ATTACHMENT
2023_10_20RBCE_CE-I-CTIndianRailwayStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_5ACS-5_1.pdf
ATTACHMENT
2023_12_21IndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_6ACS-6_1.pdf
ATTACHMENT
2024_05_14ClarificationregardingsubmissionofAnnexure-VofGCC.pdf
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
AnnxVIB.pdf
ATTACHMENT
ACS_7to10.pdf
ATTACHMENT
BifurecationofQTY.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].