Providing Electrification works inside the labs and faculty room and new toilet blocks at CSE building allotted to Department of Electronics and Communication Engineering in NITK

Amount

Wiring for Light/Power Circuit : Wiring for Light/power circuit using 2run x 4 sqmm + 1 run x 1.5 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

Wiring for Light/Power Circuit : Wiring for Light/power circuit using 2run x 2.5 sqmm + 1 run x 1.5 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

Wiring for Light/Power Circuit : Wiring for Light/power circuit using 2run x 1.5 sqmm + 1 run x 1.0 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

Open Conduit system: Supplying heavy gauge PVC conduit pipe of 20mm dia. 2 mm thick PVC conduit conforming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using WF screws. Make: Finolex/ Universal/ VIP/ Bajaj Plast/ Polycab/ Nelco/ equivalent other makes.

PVC Casing & Capping : Supplying and fixing of following sizes ‘class A’ make PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm etc as required. Make: Modi/ Classic/ Kaveri/ Polycab/VIP/Avonplast : 25mm size PVC casing and capping.

PVC Casing & Capping : Supplying and fixing of following sizes ‘class A’ make PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm etc as required. Make: Modi/ Classic/ Kaveri/ Polycab/VIP/Avonplast : 20mm size PVC casing and capping.

Point wiring using copper wire with switch: Point wiring using Class A materials: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade copper conductor flexible PVC insulated multi strand FRLS 2x1.5 Sqmm copper wire confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block complete for each out let etc., complete as per specification and direction of the Engineer Incharge. Short point up to 3mtr from tapping point to outlet via switch.

Point wiring using copper wire with switch: Point wiring using Class A materials: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade copper conductor flexible PVC insulated multi strand FRLS 2x1.5 Sqmm copper wire confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block complete for each out let etc., complete as per specification and direction of the Engineer Incharge. Medium point above 3mtr up to 6mtr from tapping point to outlet via switch.

Point wiring using copper wire with switch: Point wiring using Class A materials: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade copper conductor flexible PVC insulated multi strand FRLS 2x1.5 Sqmm copper wire confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block complete for each out let etc., complete as per specification and direction of the Engineer Incharge. - Long point above 6mtr up to 10mtr from tapping point to outlet via switch

Point wiring using copper wire with switch: Point wiring using Class A materials: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade copper conductor flexible PVC insulated multi strand FRLS 2x1.5 Sqmm copper wire confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block complete for each out let etc., complete as per specification and direction of the Engineer Incharge. - Two outlet in a row above 3mtr up to 6mtr from tapping point to outlet via switch

Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 4”x4”x3” size

Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 8”x6”x1.5” size

Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 10”x8”x1.5” size

Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 12”x9”x1.5” size

Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 15”x12”x2” size

Hylum plastic sheet 3mm thick: Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches regulators etc., and fixing on existing wood or metal box using N.F. screw as per the specification and direction of the Engineer-In-Charge.

Power board: Supplying and fixing of power board consisting of 12x9”x1.5” polished wood board with base plate covered with hylum sheet and consisting of consisting of 4 nos of 16 Amps switch, 4 nos of 16 Amps socket etc. complete. - Make: Legrand, anchor, mk GM, Elle, Lisha, Cona

Supply and fixing 6Amps SP Switch on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.

Supply and fixing 6Amps 3-way 5-pin Socket on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.

Supply and fixing Electronic Stepped Fan Regulator on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.

Power board: Supplying and fixing of power board consisting of 8”x6”x1.5” polished wood board with base plate covered with hylum sheet and consisting of 3 nos of 6 Amps switch, 3 nos of 6 Amps 5 Pin socket etc. complete. - Make: Legrand, anchor, mk GM, Elle, Lisha, Cona

Perforated cable tray: Supplying and fixing 2mm thick 300 x 50 mm size perforated cable tray with powder coated paint on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.

Fixing fittings: Fixing all types all capacities fluorescent / false ceiling / spot light / CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos. of round blocks, clamps, necessary scaffolding, tools & labour complete.

Fixing fittings: Fixing all types all capacities 2`x2` LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame using 23/0.0076" twin twisted PVC insulated wires, required nos. of round blocks, clamps, necessary scaffolding, tools & labour complete.

Releasing the existing fan dismantling testing painting after removing the existing painting by scraping and cleaning (spray method) not less than 2 coats of approved make enamel paint to a ceiling fan and wiring and fixing of the same

Fixing of Ceiling fan: Fixing a Department supplied ceiling / wall mounting fan of all capacities and all types with necessary clamps, angular, / to the existing S hook, with fan regulator, together with supplying and fixing a 5 ampere ceiling rose, necessary length of 23 / 0.0076” PVC insulated twin twisted copper wire and wiring complete.

"S"hook / anchor hook : Supplying and fixing "S"hook / anchor hook made out of 14mm dia rod for fixing ceiling fans in concrete slabs / beams.

Fixing exhaust fan: Fixing one departmentally supplied exhaust fan with mesh, clamps, iron frames in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

MS angle iron frame work: Supply and fixing 40x40x6mm size MS angle iron frame work for mounting panel board with bolt and nuts, painted with two coats of anti-corrosive enamel paint over two base coats of red-oxide priming coat

Earth Electrode for grounding: Supplying, fixing and wiring earth electrode for grounding using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in CC chamber of 400x400x400mm with cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all round with alternate layers of salt and charcoal from the bottom of CC chamber. The connection from the electrode is to be established through copper strips using bolts and nuts. The ground resistance should be below 100Ohms and earth to neutral voltage should always be less than 3V AC. The earthing test certificate should be produced by the authorised testing agencies.

Copper Strips: Supplying and running of Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip

GI Pipe bracket: Supply & fixing 32mm dia. class A GI pipe bracket up to 2.70 mtrs long terminated with a reducing collar of 40x25mm to which extra 175mm length is fixed bent at suitable angle and fixing to this bracket MV/SV/MH/FTL street light fittings of all capacities to GI or rail or RCC pole / wall using suitable clamps, bolts and nuts and wiring using capacity wires complete.

Fixing of street light/flood light: Fixing of Departmentally supplied street light/flood light fitting over existing pole/ wall ceiling including necessary scaffolding, clamps bolt nuts and wiring using suitable capacity wires

Metal box: Supplying and fixing 100 x 75x65mm sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. including cost of materials, labour, usage charges of machinery complete as per specifications.

miniature circuit breakers: Supplying and fixing following rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve, indicator ON/OF, energy cross-3 with short-circuit breaking capacity of 10K and wiring complete as required. Make: Group A:- ABB / LEGRAND / L&T - 10 Amps DP MCB

Synthetic enamel paint in two coats on new surface: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

M/s Anugraha power services

DSOUZA ELECTRICALS