REPAIR REPLACEMENT OF KERB STONE GRIT FINISH TILING AND ALLIED WORKS UNDER AGE B R I OF GE AF ADM AREA KHERIA AGRA

Amount

Demolition of cement concrete unrinforced ground floor and paving n.exc 15cm thick below or above GL complete all as specified and directed.

M&L for precast PCC Kerb stone made of concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) set in cement motar 1:6 complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of cement or plastered surfaces, of any description and girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for PCC (1:4:8) (using 40mm graded stone aggregate type) D-2 as in foundation, filling and mass concrete etc complete all as specified and directed.

M&L for complete removal of existing treatment on old painted plastered or concrete surfaces and applying two coats of synthetic enamel paint on kerb stone in alternative color complete all as specified and directed.

Taking down cement plaster on brick/ stone wall etc. including racking out joints, hacking for key, scrrubing down with water etc complete all as specified and directed.

M&L for coloured, washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450 mm x 300 mm x 7mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement to match with tiles over and including 15 mm rendering in CM 1:3 complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick, joint less (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match with tiles over & including 15 mm thick screed bed in CM(1:4) with providing border of any dark colour complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick, light shade, polished, area of each tile n exc 0.36 sqm as in floors etc set & jonted in neat cement slurry and pointd with white or coloured cement to match, design & pattern over & including 15mm thick screed bed in CM 1:4 all as specified & directed.

M&L for rubber moulded chequered cement concrete tiles 30cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors over & including screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.

M&L repair for 60 mm thick machine pressed rubber moulded precast concrete M-30 interlocking colored paver block any shape and size conforming to IS-15658-2006 laid over & including 25 mm sand cushion and filling joints and dismantling of old tiles complete all as specified and directed.

Easing and adjusting of steel window/ ventilators including removing rusted and forgeing materials and replacing broken hinges including welding and all labour complete all as specified and directed.

M&L for welding work in repairs n. exc 2.5 cm in length and n.exc. 6mm thickness of metal to be welded complete all as specified and directed.

S&F steel tank cover with zink coating, dia of cover 500mm and height 150mm of cut spherical shape and gas welded of spikes 2mm dia and gas welded of spikes 2mm dia and 50mm length at 50mm c/c both bay in zig zag motion with M.S highes hasp and staple fixed to existing PVC water storage tank of any capacity and binded with barbed wire 2mm dia and 2.24mm barbs 75mm c/c all around of tank complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work with mixing @3% by wt of cement finished fair & even in CM 1:4 complete as specified and directed. ( WPC will be paid separately).

M&L for prepration of old plastered wall surfaces and applying one coat of cement base paint complete all as specified and directed.

Supply only integral waterproofing compound conforming to IS complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde E-250) quality A complete all as specified and directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O complete all as specified and directed.

S& F in repair 1mm thick mild steel, plain black sheet in in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and directed.

M&L for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L for two coats of synthetic enamel paint to new steel surfaces of any description, over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of surfaces complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches pillars etc excl ashlar facing dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘B’ brick straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and directed.

M&L for 15mm thick cement plaster in CM (1:6) on other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for preperation of newly plastered ceiling surface & applying three coats of white wash complete all as specified and directed.

M&L for 16 to 18 mm thick polished red stone (any type) work (table rounded and polished) as in skirting, dado, steps, pillars, jambs, in fixed cement mortar 1:4 including pointed with white cement (1 :2) using marble dust with admixture of pigment to match the shade of stone over & including 15mm thick screed bed in cement mortar 1:4 with and including fixing of SS clamp/fastening including taking down of existing red stone including cement plaster complete all as specified and directed.

M&L for 25 mm thick rough dressed sand stone slab as in vertical surfaces, set, jointed and pointed in cement mortar 1:3 over & including 10mm thick rendering in CM (1:3) including taking down complete all as specified and directed.

S&F pre-painted galvalume of aluminium and zinc alloy coating with steel based plain sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Cleaning and removal of sludge/ loose earth/ leafs/ braches from open drain having n exc 0.35 m width of any depth complete all as specified and directed.

Cleaning and removal of earth/ sludge filled in PVC Pipe n exc 150 mm bore of any lengh complete all as specified and directed.

M&L for apply 2 mm thick thermo plastic road marking compound of white/ yellow (approved colours) colour & shade for road marking with machine on bituminous/concrete road surface width or paint line as per direction of Engr-in-Charge at site & managing the traffic control with proper arrangement etc complete all as specified and directed by Engineer-in-charge. Make : ASIAN MOST CMS APCO-BS or approved by GE.

Demolition of precast cement concrete articles such as RCC jallies etc set in cement mortar or cement lime mortar complete all as specified and directed.

S&F precast RCC louvers, jellies 40 mm thick type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) including all mouldings and frame work all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in bed of drain complete all as specified and directed.

M&L for cement concrete type C-1 1:3:6, (20 mm graded stone aggregate) for coping including necessary formwork complete all as specified and directed.

M&L for RCC type B1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls / beams and the similar items complete all as specified and directed.

M&L for formwork to flat, soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping), surface of concrete finished rough complete all as specified and directed.

M&L for formwork to flat, sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter,surface of concrete finished rough complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking with and inlcuding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cover slab, shelve, bed plates set in CM 1:4, including chamfers, weatherings, throating etc. complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation,etc)or insulation boards/ slabs/ blankets,any thickness, inclduing cover fillets complete all as specified and directed.

M&L for powder coated GI grid false ceiling with T & angles fixed to wall and hangs with roof with 4mm dia GI suspender including 4 mm thick designer board of size 595 mm × 595 mm etc complete all as specified & directed.

Asha Construction

M/s M S Sharma and Co.

deva engineers

M/s K S Builders

Rakesh kumar