Renovation of District Panchayat Office Building at Collectorate Campus in Kancheepuram Under SFC / 2026-26 Est Amt.14.70 Lakhs

Dismantling Brick / Stone Masonry in Cement mortar walls including all cost and conveyance etc(SOR PF. No. 29/ W-0015)

Dismantling Aluminium partition including all cost and conveyance etc 3m high including all cost and conveyance etc

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.

Plastering with Cement Mortar 1:5 (One cement and Five P.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Providing and fixing of wall partition Sale wood/ equivalent country wood frame and covered the frame work withUNIPLY/ROBIT/Equivalent ISI MARK 6mm commercial plywood and finished with Century/Equivalent 1mm thick lamination of approved colour and design

Providing and fixing of flush door Sale wood/ equivalent country wood frame and covered the frame work withUNIPLY/ROBIT/Equivalent ISI MARK 6mm commercial plywood and finished with Century/Equivalent 0.8mm thick lamination of approved colour and design

Supply and fixing of PVC Panelled Door Shutters Hollow Type - 200mm x20mm panels with 1mm wall thickness for panels and styles and rails of suitable size with 2mm wall thickness suitably reinforced using MS Angle / Flat including cost of necessary aluminium hinges and other furniture fittings and labour charges etc complete

Supply and fixing of Europeon Water Closet with all fittings and 10lit capacity flusing tank charges for labour etc complete

Supply and fixing of EWC Wall Mounted Type brand of Parryware including fittings and plumbing charges for labour etc complete

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Providing Gyp Board false ceiling using 12mm thick SAINT GOBIN/ specification. Equivalent board with ISI MARK gyp board with necessary nece Gyp arc/Gypsum/equivalent G.i perimeter and Langle, Tangle hooks etc.

Wiring with Fenolex/equivalent ISI FIRE Resistance 2 x 1.5sq mm (22/0.3) PVC insulated single core unshothed copper conductor cable of 1100 grade in suitable PVC nighd pipe in wall and ceiling with PCV accessories and T.W.Switch box and 5A FT switch and painting of suitable colour with continuos earth wire connection of 14 swg TC Wirefor open PVC light/fan pint

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

supply and fixing of Wall Mounting Fan and fixing with necessary supports such as suitable wall clamp which is for holding the fan including all cost and conveyance etc

Supply and Fixing of Air Condition Arrangements using 1.50 TN With Copper Wire and fitting points, fittings with necessary Supports including all cost and conveyance etc

Supplying and fixing of False ceiling light using Philps/crompton make 9 watts Round LED lights with necessary ceiling cutout as per panel size with necessary acessories etc, complete.

Providing Curtains arrangements for Windows including all cost and conveyance etc

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}