NIT No. 09 (20-21) Item No. 12

S/I/T/C of 50 HP pump set with other allied works at Pkt-V Mayur Vihar Ph-I B.P.Station i/c following works:-Dismantling of old pump set by removing electric connection and remove the common base frame by cutting old nut bolt with the help of gas cutter and manual labour and demolish the RCC foundation by pneumatic hammer also removing the old cable and old starter.

Dismantling the old 100mm dia. sluice valve, NRV & delivery line by cutting old nut & bolts with the help of gas cutter.

S/o horizontal split casing pump with CI impeller, SS410 shaft & sleeve suitable for head 43 Mtr , Discharge 200 m3/hr, RPM 1450, Size 100mm x 150mm. Make : Kirloskar/Mather & Platt

S/o Motor TEFC AC 4 pole, 3 phase, 50HP/55 KW, 1485 RPM. Make : Kirloskar/ABB

S/o of common base frame with coupling & guard for above for above mentioned pump & motor.

S/o 100mm dia medium class MS Pipe. Make : Jindal / TATA

S/o 150mm dia flange 10mm thick

S/o of Heavy duty M S gap piece 100mm x 150mm as per site requirement

S/o 200Amp 3P,415V MCCB with sheet enclosure. Make : Schneider/Siemen/L&T

S/o CI/DF swing type non return valve of 100 mm size as per IS 5312 (part 1&2) PN 1.0 C I body, door/ bronze to rubber rings/ SS hinge pin construction. Make Kirloskar / IVC

S/o CI/DF Non rising spindle sluice valve of size 150 mm, PN 1.0 IS:14846,CI body/SS410 Shaft construction. Make Kirloskar / IVC

S/o Nut bolts and washer off sizes.

S/o rubber insertion sheet 75% synthetic. Make : Jyoti

S/o Manually operated oil immersed sheet steel clad floor mounting type auto transformer starter as per IS : 13947 ( Pert 1 & 4) with 1 No. under voltage release , 3 Nos., Magnetic overload release with oil dashpot time lags 1 No. Stop lever, plain enteries for PVC cables & auto transformer with 50%, 65% , 80%, tapping , 415 volts , 3 Phase, 50 Hz without oil filling, Heavy duty with double contact & strip wound overload coil (50 HP). Make : Advance/Bentex/Capital

Supply of 3.5 core x 50 Sqmm PVC insulated armored inner sheathed aluminium conductor cable for making connection of motor & starter. Make : Grandlay /Polycab/National

S/o Transformer Oil. Make : All DJB Approved make

Making of RCC foundation of suitable size by 1:2:4 concrete including providing fixing of 12 Nos. foundation bolt of size 25mm x 600mm i/c leveling & plastering.

Installation of above, pump sets, with proper alignment and also making of all electrical connections i/c thumbing & tapping & fitting of valves. with the help of welding, gas cutter & tri pod etc as required on full load i/c cartage and testing on full load etc.

Auro Green Products

M/s S.R. Enterprise

Bansal Traders

Devraj Enterprises

Naman Enterprises

Shakti Trading Co.

Swarn Engineers

RRPN GROUP OF SOLUTIONS