PROVN OF FURNITURE FOR MAP PHASE II AT LONAVLA

Almirah medium steel :- Overall size shall be all as shown on drawing. It shall be made of 20 gauge thick mild steel sheet. The almirah shall have three shelves. The almirah shall have one normal handle 120 mm long having three way locking system with proper workmanship. All joints and welding, fixing shall be done according standard workmanship.Rest all as per drg. Make of Lock :- Link/Godrej/Harrison. Finish & Paint :- All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Bath Stool PVC : -Overall size shall be all as shown on drg. Make- Amko or equivalent

Bed hard :- Overall size shall be all as shown on drg. All steel shall be rectangular MS pipe of 18 gauge thick. The head board shall be 800 mm high and foot board shall be 500 mm high. The head and foot board shall be provided with 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE). 2 mm thick PVC half round edge beading without joints shall be provided all around . The top of bed hard shall be 12 mm thick BWR plywood ISI mark 303 grade provided as shown on drg. All joints and welding, fixing shall be done according standard workmanship. Rest all as per drg. Make of Plywood : Archidply/Century/Green Ply/Kitply Finish & Paint :- All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Bin linen multipurpose-:The sides, partitions, shelves, drawers of the bin linen shall be made of 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE). 4 mm thick half round teak wood beading without joints shall be provided as per drg.The back of the bin linen shall be of 12mm thick commercial plywood BWR grade. Shutters shall be provided with magnetic catchers. In addition wooden base frame to be provided with 925 mm long rail of size 25x40 mm both sides, 300 mm short rail of size 25x40 mm both side and 45x45 mm legs to each corners at 75 mm height as directed by Engr-in-charge. Rest all as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

Chair dining :-Overall size shall be all as shown on drg.All wood shall be first class teak wood.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiffners of size 20mmx25mm three in nos shall be fixed as specified in drg.75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be of section 40x50mm.Four teak wood vertical stiffners of section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.Rest all as per drg. Make of cushion:- Sleepwell/Kurlon/Godrej interio Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

Chair verandah :- Overall size shall be on all as shown drg.Frame shall be 20 mm dia MS conduit of wall thickness 1.6 mm made to shape as shown on drg. 3mm thick flat iron plate shall be welded at the bottom of all legs. Caning shall be done with 4mm wide cane in mat pattern or as directed by Engineer-in-charge in the seat, back and hand rest portion. PVC/hard rubber shoes shall be provided to the bottom of all legs. All joints and welding, fixing shall be done according standard workmanship. Rest all as per drg. Finish & Paint : All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Chair writing :-The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.12mm thick hot pressed plywood upholstered with superior quality fabric as approved by GE and moulded polyurethane foam of approved make with PVC lipping alround shall be provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.All joints and welding, fixing shall be done according standard workmanship. Rest all as per drg. Make of cushion:- Sleepwell/Kurlon/Godrej interio Finish & Paint :-All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Chair computer :-Overall size shall be all as shown on drg.Push back revolving chair, height adjustable, nylon wheel, base metal assembly required. The product requires basic assembly. Chair shall be comfortable revolving with an absolute executive look. 360 Degree smooth swivel movement. Padded seat as well as the back with comfortable arm rest.The cushion shall be of size 50 mm and of 50 density with covered best quality tapestry cloth as approved by GE.Rest all as per drg. Make of cushion: Sleepwell/Kurlon/Featherlite/Godrej interio Finish & Paint :-All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Charpoy IP hard top :- Overall size shall be all as shown on drawing. Two long rails and two short rails shall be of 25mmx65mmx16 guage MS rectangular pipe .The legs shall be of size 32mmx32mmx1.6mm welded to long and short rails as shown on drg. Two stiffeners of size 25mmx25mmx1.6mm shall be provided on equal distance between two opposite long rails. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. Two stiffeners joining legs of size 25mmx25mmx1.6mm shall be provided at 150mm from ground level .12mm thick BWR plywood ISI mark 303 grade shall be provided for top as shown on drg with proper nut and bolt. PVC hard rubber shoes shall be fixed at bottom of each legs. All joints and welding, fixing shall be done according standard workmanship. Rest all as per drg. Make of Plywood : Archidply/Century/Green Ply/Kitply Finish & Paint : All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Hat stand with mirror: - Overall size shall be all as shown on drawing. All wood shall be of Ist class well seasoned teak wood. The Frame of Hat Stand shall be provided with 4mm thick teak ply in front (one side teak face). The back of Hat Stand shall provided with 4mm thick commercial plywood. A mirror of 440mm high and 300mm wide, free from all distorition and defects shall be provided on right hand side of Hat Stand. four brass pegs of 75mm wide and 120mm high of shape as approved by GE shall be fixed on left side of mirror. Rest all as per drg. Make of mirror : Modigaurd/ Swastik/Saint gobin Polish & Finish: All wood surface shall be Melamine polished with high gloss finish.

Ladder Aluminium :- Overall size shall be all as shown on drgs. Hard rubber shoes shall be fixed at the ends of aluminium rungs and stringers as shown on drg. The clear space between the stringers shall be 300mm. Rest all as shown on drg.

Table peg :- Overall size shall be all as shown on drg.All wood shall be first class MP teak.The top shall be of 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE). 4 mm thick half round teak wood beading without joints shall be provided all round the top of table.280 mm long of two Nos short rails of size 20x40 mm to be provided at top and centre rail of size 20x50 mm shall also be provided lengthwise at centre in between the side bottom rails as directed by Engr-in-charge. Hard rubber/PVC shoe shall be fixed to the bottom of all legs as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

Receptacle PVC :- Overall size shall be all as shown on drawing. The receptacle shall be of capacity 20 ltrs. The body of receptacle PVC shall be made up of thick polymer plastic of thickness not less than 2.5mm, provided with swivel lid and handles on both sides as shown in drg. Make -Cello, Tupperware, Amko or equivalent as shown in drg.

Rack shoe steel :- Overall size shall be all as shown on drg.The frame shall be 25 mm dia MS pipe with 18 gauge wall thickness.MS rod shall be welded to 20 mm dia MS pipe of 18 gauge thick.Rest all as per drg and as ditected by Engr-in-charge. Finish & Paint: All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven tank process.The test certificate for powder coating is to be submitted through NABL accredited Lab.

Side board :-Overall size shall be all as shown on drg. 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE) shall be provided at top and sides (Colour and shade as approved by GE). Four drawers shall be provided equally in this space and telescopic channel to be provided to each drawer as directed by Engr-in-charge. The shutters shall be of 18 mm thick pre laminated particle board exterior grade with 4 mm thick half round TW beading without joint shall be provided alround the front shutters and front of shelves. All drawers and shutters shall be provided with one handle each of powder coated mild steel and 100mm long. In addition wooden base frame to be provided with 925 mm long rail of size 25x40 mm both sides, 300 mm short rail of size 25x40 mm both side and 45x45 mm legs to each corners at 75 mm height as directed by Engr-in-charge. Rest all as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

Sofa set 04 seater with cushion :- Overall size shall be all as shown on drawing. All wood shall be of first class well seasoned teak wood (MP). The cushion shall be of size 4" and of 40 density as approved by GE. Cushion shall be covered with best quality tapestry cloth not less then Rs. 250/Mtr and as apporoved by GE. PVC hard rubber shoes of 25 mm dia shall also be provided to bottom of all legs with 20 mm long screws.Rest all as per drg. Make of cushion: Sleepwell/Kurlon/Featherlite/Godrej interio Polish & Finish:-All wood surface shall be Melamine polished with high gloss finish.

Table bedside :- Overall size shall be all as shown on drg.The entire frame of table bed side shall be made up of MS square pipe 18 gauge duly black powder coated. The two sides and top shall be of 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE) with 4 mm thick half round teak wood beading without joints shall be provided. The Back of the table as shown in drg shall be provided with 6mm ISI marked 303 BWR grade plywood duly screwed to frame. The two sides, back and bottom of drawers of the table shall be made up of 12mm thick ISI marked 303 BWR grade plywood as shown on drg, except the front side which shall be of 18 mm thick pre laminated particle board exterior grade .The drawers shall be made functional on telescopic channel as directed.The drawers of the table shall be provided with 100mm long CP handles.L-shape SS corner bracket brace support 30x30 mm to be provided. Additional Front , back and side stiffners of MS square pipe (18 Gauge) duly black powder coated at 50 mm high from ground to be provided as directed by Engr-in-Charge.PVC/hard rubber toes shall be provided to the bottom of all legs. Rest all as per drg. Finish & Paint :-All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Table centre :- Overall size shall be all as shown on drg.All wood shall be first class MP teak. 430 mm long of two Nos short rails of size 20x50 mm to be provided at top. The top shall be of 18 mm thick Ipre laminated particle board exterior grade (Colour and shade as approved by GE). 4 mm thick half round teak wood beading without joints shall be provided all around of top.Centre bottom stiffener of size 20x50mm shall be provided between bottom short rails as directed by Engr-in-Charge. Hard rubber /PVC rings shall be fixed to the bottom of all legs. Rest all as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

Table dining 06 persons :- Overall size shall be all as shown on drg. All wood shall be first class MP teak.The top shall be of 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE). 4 mm thick half round teak wood beading without joints shall be provided all around the top of table. 08 Nos trianguler wooden bracket of size 25mmx100mm shall be fixed at the junction of legs with top rails. Hard rubber/PVC shoe shall be fixed to the bottom of all legs. Rest all as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. Rest all as per drg.

Table dressing gents : Overall size shall be all as shown on drg.The sides, top ,bottom of table shall be of 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE). Back of dressing mirror shall be of 12mm thick BWR grade ISI 303 marked plywood.Rest all as per drg. Make of mirror: Modigaurd/ Swastik/Saint gobin Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

Table dressing ladies :- Overall size shall be all as shown on drg.The sides, top ,back and front of the base shall be of 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE). All edges after post form shall be sealed with 2 mm PVC beading. Bottom of the drawers shall be of 6mm thick commercial BWR grade plywood.Front of the drawers shall be of 18 mm thick Ipre laminated particle board exterior grade.The drawers shall be made functional on telescopic channel as directed.The drawers of the table shall be provided with 100mm long CP handles.The seat of the stool shall be 75mm high ,made of foam 40 density covered with tapestry cloth as approved by GE.Rest all as per drg. Make of mirror : Modigaurd/ Swastik/Saint gobin Make of cushion: Sleepwell/Kurlon/Featherlite/Godrej interio Polish & Finish:-All wood surface shall be Melamine polished with high gloss finish.

Table writing :-Overall size shall be all as shown on drg. All wood shall be first class MP teak.The top shall be of 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE). 4 mm thick half round teak wood beading without joints shall be provided all around the top of table.Drawer shall be made functional on telescopic channel.Shutter shall be provided with magnetic catcher. 25x50 mm stiffner to be provided under the top of table as directed by Engr-in-charge.Hard rubber/PVC shoe shall be fixed to the bottom of all legs. Rest all as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

Tabe computer:- Overall size shall be all as shown on drgs. 18mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE) shall be used in top, drawer, shelves, drawers, tray. The frame of table shall be of 25mm square pipe of wall thickness not lss than 1.6mm. The top of table shall be provided with 4mm thick half round teak wood beading without joints. The legs shall be made out of 25mmx50mm MS rectangular CR pipe of 18 guage. Each leg shall be provided with rectangular PVC cover made to shape on front sides only and another end shall be closed with welded sheet. The drawers shall be provided with telescopic channel 300mm long.The nylon buffers shall also be provided in the bottom of legs. Finish & Paint :- All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Teapoy :- Overall size shall be all as shown on drg.All wood shall be first class MP teak.Top shall be of 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE) and 4 mm thick half round teak wood beading without joints shall be provided all around of top.390 mm long of two Nos short rails of size 30x50 mm to be provided at top and centre rail of size 30x50 mm shall also be provided lengthwise at centre in between the side bottom rails.Hard rubber/PVC shoe shall be fixed to the bottom of all legs. Rest all as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

Teapoy verandah :-Overall size shall be all as shown on drg. The legs, top centre stiffener, top rails and bottom rails shall be of 18mm square MS pipe of wall thickness 1.6 mm.Base tray made of 5mm dia MS bar as shown on drg at equal distance shall be made and fixed as shown on drg.Top shall be of 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE) and 4 mm thick half round teak wood beading without joints shall be provided all around of top.Hard rubber shoe shall also be fixed to the bottom of each leg.All joints and welding, fixing shall be done according standard workmanship. Finish & Paint:- All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Please Enable Macros to View BoQ information