SPL REPAIR TO BLDG NO P-4 AND P-5 OF MES YARD UNDER GE (WEST) JABALPUR

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work as in Truss,Rafter,Purlin,Post,Fencing,rail,gusset plates of any description, complete all as specified and as directed .

Dismantling framed timber scantlings under 40 sq. cm in section as in fillets, truss,rails, posts, rafters, purlins, etc. complete all as specified and as directed.

Dismantling un framed timber scantlings under 40 sq. cm in section as in fillets, truss, rails, posts, rafters, purlins, etc. complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position,framed work,complete all as specified and as directed .

M&L for Mild steel works as in posts and struts,purlin,rafter,truss,Circular pipe, square/rectangular hollow section, flat iron, Nut bolt,gusset plates etc, cutting tops to shape as directed, drilling holes, all necessary drilling, bolting or riveting, etc; including embeding in concrete and screwing etc. and similar work conforming to Fe-290 Gde E-165 .complete all as speicfied and as directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as speicfied and as directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, valley gutter,fixed with self tapping screws complete all as speicfied and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as speicfied and as directed.

M&L for Non asbestos fibre cement building boards 4 mm thick fixed or laid/ inserted to Aluminium framework with screws fixed in flat or slope ceiling, including aluminium snap grid,complete all as specified and as directed.

M&L for Solid PVC Wall Lining(wall Panneling) consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site including PVC frame as per specifications and drawing complete all as speicfied and as directed.

S & F in repair water closet (Squat Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc,with necessary connecting items, complete and making good to floor to match with existing complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with necessary connecting items, complete all as specified and as directed.

S&F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flushpipe, brackets complete all as specified and as directed.

S&F in repair vitreous china wash basin white flat back size 580x450mm and brackets, complete all as specified and as directed.

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as speicfied and as directed.

S&F in repair,15 mm dia Pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as speicfied and as directed.

S & F in repair bib taps cast copper alloy CP with butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm bore dia complete all as specified and as directed.

S & F in repair stop valves/angle cock cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia complete all as specified and as directed.

S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and as directed.

S&F in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and as directed.

S&F in repair plastic water closet seat, white/black closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as speicfied and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repair for Towel Rail 600mm long of PTMT fixed with screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed .

S&F in Repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed .

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store,complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store,complete all as specified and as directed.

Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvent suitable for CPVC pipe and brass threaded fittings for fixing taps and valves, complete all as specified and as directed.

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvent suitable for CPVC pipe and brass threaded fittings for fixing taps and valves, complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S & F for 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints to wall complete all as specified and as directed.

S & F for 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints to wall complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

Taking down shutter of size n exc 1.0 Sqm each of any description complete all as specifeid and as directed.

Taking down shutter exc 1.0 sqm but n exc 2.0 sqm each of any description complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) of size not exc. 1.5 sq. m each complete all as specified and as directed.

Taking down Chowkhats or frames with shutter (without taking off shutters from the frame) of size exc 1.5 sqm but not exc.4.0 sq. m each complete all as specified and as directed.

S&F for aluminium powder coated window sliding type (3 track), 1.5mm thickness of frame and shutter with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and as directed.

S&F for aluminium powder coated louvered ventilators of 1.50mm thick frame including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching, complete all as specified and as directed.

S & F for Factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed.

S & F for Providing and fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, with wood free EPC, supplying & fixing in frame at site as per specification & drawing complete all asspecified and as directed.

S & F for Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, with double rebates including necessary fixing lugs, hinges, lock strike plate etc, including providing PCC 1:2:4 type B0 (using 12.5mm graded stone agg) to fill the frame & making good complete all as specified and as directed.

S & F for Pressed steel frames made of 1.25 mm thick MS Sheet size 105x60mm for doors, with single rebates including necessary fixing lugs, hinges, lock strike plate etc, including providing PCC 1:2:4 type B0 (using 12.5mm graded stone agg) to fill the frame & making good complete all as specified and as directed.

M&L for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F for 35 mm thick factory made plain framed , Panelled shutter (three Panel) with lock rail of 9 mm B.W.P. commercial ply or 12 mm veneered patticle board with commercial veneering on both face , the size of rail and stile as per IS: 1003 (Part 1) kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L for 35mm thick factory made second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F for aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and as directed.

S&F for 100 mm long Butt hinges stainless steel complete all as specified and as directed.

S&F for 75mm long Butt hinges PTMT complete all as specified and as directed.

S&F for 150mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repair 150mm long Aluminium handles cast type anodised of extruded section complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Hacking out old broken glass (any the size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed by Engr-in-charge.

M&L for Toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

M&L for 6 mm thick cover fillets of standard hard board ,40 mm wide and fixing with screws complete all as specified and as directed.

S&F, for 1st class HW Beads, straight ( 20 mm size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to store (Plain or moulding as requirement) complete all as specified and as directed.

S&F for 30 mm wide Steel Continous (piano) hinge, steel bright finish or electro galvanised etc complete all as specified and as directed

S&F in repair 40 mm dia , SS cupboard knobs fixed with nut ,screw and washer of mild steel bright complete all as specified and as directed.

S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete including necessary welding if fixed in steel door.complete all as specified and as directed.

S & F in repair Hasp and staple 75 mm , stainless steel, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

M&L for floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc. complete all as specified and as directed.

Welding in repairs n. exc 2.5cm in length , on metal of thickness n exc 6 mm , for fixing of door hinge, door spring , welding in iron doors complete all as specified and as directed.

S&F for framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and as directed.

S & F in repair curtain rod stainless steel with brackets for each, stops, rollers etc. and fixed in positioncomplete all as specified and as directed.

S&F for 18-20 mm thick Acrylic PVC Celluka Board,prelaminated one side with decorative choice lamination & other side balancing white lamination approved texture ("Celluka PVC ply or equivalent in "sintex" as approved by GE) as in kitchen cabinet,Cupboard etc ( with shelves and partition ) including necessary fittings & fixtures as per manufacture's instrucions complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 300x300/400x400 mm x 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L for non skid coloured digital ceramic tiles size of tiles 450x350/300x600x7mm thick vertical surface such as in skirting/dado etc over and including 10 mm thick cement plaster in CM 1:4, complete all as specified and as directed.

M&L for 18 to 20 mm thick zet granite Black Work (table rubbed and polished ) as in cooking platforms, and like over 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed

M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM in 1:6 finished even and fair without using etra cement.complete all as specified and as directed

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM(1:3) in two layer ( 10 mm +5mm) with water proofing compound and finished even and smooth without using extra cement . complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately.

Complete removal of existing treatment of wall surfaces complete all as specified and as directed.

Preparing old wall surfaces complete all as specified and as directed.

Preparing new wall surfaces complete all as specified and as directed.

Priming plastered and other surfaces with alkali resistant primer complete all as specified and as directed

M&L for 1 mm thick wall care putty on wall,complete all as specified and as directed

M&L for 1 coat Oil emulsion distemper on wall, complete all as specified and as directed

M&L for subsequent coat Oil emulsion distemper on wall, complete all as specified and as directed

M & L for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new or old surfaces, height upto 15 mtrs complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint any tint over a coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth including preparation complete all as specified and as directed.

M &L for applying two coats of synthetic enamel paint of any tint on new steel surfaces of any description not otherwise described over 10cm width or girth including preparation complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection,flooring etc,complete all as specified and as directed.

M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in subbase, Hard standing and similar works complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm crushed stone aggregate as in leveling course complete all as specified and as directed.

Material and labour for 25mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for 80 mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-40 grade with grey cement and pigment, confirming to IS 15658-2006 complete all as specified and as directed.

Demolition of brick /stone walls built in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and as directed.

Ditto all as per Srl item No above but except brick complete all as specified and as directed.

M &L for applying one coat of synthetic enamel paint any tint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation complete all as specified and as directed.

M &L for applying one coat of synthetic enamel paint of any tint on old painted steel surfaces of any description not otherwise described over 10cm width or girth including preparation complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling plugging holes etc. in apron complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan area and getting out, as in sof/loose soil, complete all as specified and as directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.

Supply, laying and testing of 150 mm inner diameter of double wall corrugated (DWC) high density polethelene pipes(HDPE) and stiffness class-8 (SN-8) with ISI marked (with CML No) with and including all fittings & jointing materials for sewage lineand laid in trenches as specified in IS-16098(Part-2):2013 and as per manufacturer's instruction complete all as specified and as directed. Note:- Bedding of pipe shall not be provided in normal condition and construction methods shall be strictly compiled as per clause no A-4 Annex 'A' of IS 16098(Part-2):2013 complete all as specified and as directed.

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully ceiling fan/Exhaust Fan of any sweep and size and depositing to MES store complete all as specified and as directed.

Taking down carefully Main switch and Distribution boards any make and size complete all as specified and as directed.

Taking down carefully Old unserviceable of any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and as directed.

Material & Labour Sub main wiring with four single core PVC Insulated cable two run of size 4.0 Sqmm multi-strand copper conductor FRLS cable 1100 volts grade drawing into PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire including making good disturbed surface to match the existing complete all as specified and as directed. Note : - two runs of 4.0 Sqmm & one run of 4.0 Sqmm cable shall be measured as one unit run.

M/L for Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and as directed. Note :-Two runs of 6.0 Sqmm Wire and one run of 6.0 Sqmm Earth wireshall be Measured as one unit length.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

(a) One light point controlled by one switch.

( b) One fan point/ex fan controlled by one switch.

(c) One socket point controlled by one switch on same board.

(d) One socket point controlled by one switch on Independent board.

Description all as per item No 115 here in before but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 1.5Sqmm solid copper conductor PVC for 3 pin switch socket outlet 15Amp independent board complete all as specified and as directed.

M&L for modular fan regulator socket type AC 230 volts complete all as specified and as directed.

M&L for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and as directed.

M&L for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and as directed.

M&L for Switch socket combination 3 pin 5 and 15 Amps AC 230 volts flush type complete all as specified and as directed.

M&L for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and as directed.

Supply & Fixing Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F for Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and as directed.

S & F for MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and as directed.

S & F for MCB single pole 240 volts 6 to 40 Amps, B Series complete all as specified and as directed.

Supply & fix in replacement of LED Security Light Luminaire 35 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens. complete all as specified and as directed.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar triple pole and neutral vertical 415 V, 4 Ways, double door type,With Incoming MCCB of 100 Amps Capacity complete all as specified and as directed.

S & F MCB TPN 25 to 63 Amps, 240 Volts, minimum 10 KA, "C" series rupturing capacity and to be housed in DBs catered here in before complete all as specified and as directed. (Note :- Proper and suitable size cable copper lugs to be fixed with MCBs are included in unit rate of each MCB of any rating)

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and as directed.

S&F for LED light fitting square 57x57 CM Not less than 36 watt along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and as directed.

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cab les ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core complete all as specified and as directed.

Supply and lay DWCP pipe of OD 50 mm , ID 38 mm complette all as per required, specified and as directed.

Supply and laying Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and as directed.

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and as directed.

DOBARIA BUILDCON (BID ID -3319708)

JAIDEV SINGH CHADHA (BID ID -3318305)

ANAMIKA CONSTRUCTION (BID ID -3328094)

Hemant Associate (BID ID -3319152)

chandra builders (BID ID -3316753)

Chetna Enterprises (BID ID -3328203)

M/S Modern builders (BID ID -3320156)

Shri kamal traders (BID ID -3320074)

deepak kumar vishwakarma (BID ID -3321351)

Pacific telecom engineers (BID ID -3319342)