PROVN OF WALL MOUNTED CABINETS IN KITCHEN FOR JCOS/OR GOVT MD ACCN AT J-1 LOC AND PROVN OF 06 X GARBAGE BINS WITH INTERLOCKING PATHWAYS AT 4011 FD HOSP UNDER AGE B/R-I OF GE (E) JRC

Amount

S & F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For Kitchen Wall mounted Cabinets. Make of WPC Board:- Rajshri Plastiwood Ltd/ Sintex/ Fenesta as approved by GE.

S & F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) One side Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company :For Kitchen Wall mounted Cabinets. Make of WPC Board:- Rajshri Plastiwood Ltd/ Sintex/ Fenesta as approved by GE.

S&F auto closing hinges ( 0 degree hinges ) for cabinet case,complete all as specified and directed.

S&F 125 mm size Extruded brass handles, fabricated type polished complete as specified and dirceted.

Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc any description complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete walls, finished even and smooth without using extra cement to match with the existing surfaces,Complete all as specified and directed.

M&L for prepration of new plaster surfaces of walls and applying two coats of oil bound distemper including a coat of primer on plastered surfaces over a coat of 3mm thick wall putty complete all as specified.

Surface dressing in soft/loose soil n exc 15 cm deep complete all as specified and as directed.

Excavating in trenches n.exc 1.5 m wide and not exc 1.5 m in depth for foundations, etc or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified.

M & L for 150 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregates) in sub base, complete all as specified and directed.

M & L for 50 mm thick PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregates) in sub base, sub floor of paving, path etc surface finished even and fair to receive top layer complete all as specified and as directed.

M&L for Brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles of size 300x200x6 to 7mm thick on vertical surface such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with and including rendering 10 mm thick in cement mortar 1:4 finish rough to receive the tiles complete all as specified and directed. Make:- Kajaria/ Somany/ Johnson.

M & L for 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregates) in sub base, sub floor of flooring, paving, path etc surfaces finished even and fair to receive top layer complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation all as directed.

M & L for 60 mm thick machine pressed precast conctete interlocking paver block shape and size confirming to IS 15658-2006 M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in coping bed block or similar work including necessary form work, weathering slightly rounded or chamfered angles and throating all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soils complete all as directed.

Removing excavated soil to a distance n exc 50mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

M/s GURFATEH BUILDERS (BID ID -3509249)

B D BATRA AND SONS (BID ID -3509632)

M/s SUDHIR KUMAR (BID ID -3505666)

SANMATI UDYOG (BID ID -3514638)

KMTR MONCHER COLLECTION PRIVATE LIMITED (BID ID -3515004)

nitin trading company (BID ID -3512094)

KAMAL AGGARWAL (BID ID -3508114)