PERIODICAL SERVICES TO BUILDINGS INCLUDING OVERHEAD TANKS IN ZONE A AND IMPROVEMENT / REPLACEMENT OF PETTY REPAIR SERVICES IN DAMANA UNDER GE JAMMU

Amount

Supply and fixing in repair framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed ballusters, walk ways, railing, frame work of water tanks, cupboard frame etc (including cutting holes in brick masonry walls and fixed with PCC 1:11/2:3) and similar work confirming to Fe.290.Gde-E-165. complete all as specified and as directed.

Supply and fixing 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fixing in repairs Helical door spring 150mm including roller and roller plate complete fixed with welding to existing steel chowkhats complete all as specified and directed.

Hacking out old broken glass of any thickness, size, quality or description from the wooden / steel frames glazing with putty or fixed with wooden beads complete all as specified and as directed.

Supply and fixing 3.5 mm thick ordinary glass sheet quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, including scaffolding to reach up to 4 storey building complete all as specified and as directed.

Description all as per Ser Item No 6.00 here-in-before but frosted glass complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of new surface complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 15mm complete all as specified and as directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm complete all as specified and as directed.

Supply and fixing steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm complete all as specified and as directed.

Supply and fixing steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20mm complete all as specified and as directed.

Refixing only 15mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and as directed.

Refixing only 20mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and as directed.

Material and labour for opening of air lock / blockage in galvanised iron pipe line from outlet of water tank to all internal galvanised iron pipes / fittings to smooth flow of water from bib taps / shower / wash hand basin pillar tap / stop valves complete by air pressure / water gravity pressure etc complete all as specified and directed.

Material and labour for replacing 15 mm galvanised iron fittings of medium grade ISI marked like butt Elbow, socket, nipple, union socket, tee etc complete all as specified and as directed at site.

Material and labour for replacing 20 mm galvanised iron fittings of medium grade ISI marked like butt Elbow, socket, nipple, union socket, tee etc complete all as specified and as directed at site.

Material and labour for complete removal of vegetations, roots and shrubs from wall and making good the wall with cement, brick work and plastering including all scaffolding up to 4 storey building complete all as specified and as directed.

Material and labour for repairs to steel windows / doors by using welding machine where necessary thickness of each welding spot exceeding 6 mm but not exceeding 9 mm complete all as specified and as directed at site.

Easing of existing doors / windows of any description complete all as specified and as directed at site.

Material and labour for disconnecting existing tanks of capacity exceeding 250 litres but not exceeding 500 litres, setting aside for repairs, cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale dirt etc from tanks complete all as directed at site and writing date of cleaning with synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Material and labour for disconnecting existing tanks of capacity exceeding 500 litres but not exceeding 1000 litres, setting aside for repairs, cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale dirt etc from tanks complete all as directed at site and writing date of cleaning with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC low level flushing cistern valve less, syphonic action type of 10 litres capacity white with inlet, ball valve, float and handle including cast iron brackets, PVC flush pipe 32mm dia, PVC connection (15 x 450 mm) long complete all as specified and as directed.

Material and labour for repairing of PVC low level / high level cistern by changing its internal fitting including PVC flush pipe etc complete all as specified and as directed at site.

Supply and fixing in repair vitreous china squatting pan 'Orissa pattern' size 580x440mm white, with integral foot rest 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe, anti-syphonage pipe etc. complete making good to floor as existing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe and joints complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs stainless steel sink with drainage board, made of 1.00mm thick sheet for kitchen or laboratory with plug, washers, waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets, connecting union to pipe, overall size 915mm x 460mm, bowl size (410x330x160mm) complete all as specified and as directed.

Supply and fixing in repairs kitchen plate rack of stainless steel of size 900 x 800 x 230mm made out of 1mm thick stainless steel sheet complete all as specified and as directed.

Supply and fixing in repairs Vitreous china wash hand basin white, flat back of size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs pillar tap fancy type chromium plated with capstan head, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes 15 mm bore dia complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated mixer of bore dia of pipe 15mm for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Dismantling PVC water tank of capacity upto 1000 litres and removing from site complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and as directed in SSR Part I.

Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and as directed in SSR Part I.

Supply and fixing in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm-142 grams) of 15 mm bore complete all as specified and as directed.

Supply and fixing in repairs 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram), screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Repairing of existing float valve by replacing its rod of brass or plastic float of any description complete all as specified and as directed at site.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area complete all as specified and directed by Engineer-in-Charge. Note: - Plaster work may be in patches upto triple storey.

Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick surface finished even and smooth without using extra cement upto height of four storey building complete all as specified and as directed.

Material and labour for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick surface finished even and smooth without using extra cement etc complete all as specified and as directed. (Including all necessary scaffolding, lifiting arrangement for external surfaces).

Material and labour for applying two coats of oil bound distemper to newly plastered surfaces including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying two coats of cement based paint including preparation of newly plastered surface complete all as specified and as directed.

Material and labour for complete removal of existing treatment and applying two coats of apex paint on old surface of chajjas including preparation complete all as specified and as directed.

Material and labour for complete removal of existing treatment of old surface of wall (plastered or unplastered) and applying one coat of cement based paint complete all as specified and as directed.

Material and labour for applying two coats of oil bound distemper of wall to old plastered surfaces including preparation of surfaces complete all as specified and directed.

Material and labour for applying three coats of white wash on ceiling including preparation of newly plastered surface complete all as specified and as directed.

Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) removing unserviceable materials outside MOD area and rubbish off the premises complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Description all as per Ser Item No. 51.00 here-in-before but as in skirting including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for Vitrified tiles dark shade 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 15mm thick in cement mortar (1:4) complete all as specified and directed.

Material and labour for vitrified tiles dark shade 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as on vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 10 mm thick screed in cement mortar (1:4) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles 300 x 450 x 7 to 8 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including taking down old plaster and 10 mm thick screed in cement mortar (1:4) complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Material and labour for granite 20mm thick (Pure black) (tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar (1:4) edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Supply and fixing in repairs chromium plated bib tap 15mm size with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing in repairs bib tap of bore 15mm standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (minimum weight 15mm-90 gram).

Supply and fixing in repairs cabinet mirror plastic body for toilet of size 350 x 600mm with 4mm thick looking mirror complete all as specified and as directed.

Supply and fixing in repairs chromium plated health faucet with 1 metre long chromium plated flexible pipe complete all as specified and as directed.

Supply and fixing in repairs plain aluminium sheeting 0.71mm thick, in crumple joint covering, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

Supply and fixing in repairs angle / stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated shower rose 125mm size any colour with or without swivel joints, arm 15mm size 195mm long including fixing to steel pipe or union complete all as specified and as directed.

Dismantling boarding in any description fixed in any position with nail complete all as specified and as directed.

Supply and fixing for frame work for ceiling with specification as under mentioned: - (i) GI section frame work (Powder coated) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mmX19mmX0.45mm, cross 'Tee' 28.6mm (web) X 24mm flange 0.33mm thick powdered coated main tee 38mm (Web) X 24mm flange 0.33mm thick. Wall angle shall be screwed / fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm centre to centre, then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm centre to centre to soffits. To from grid of 610X610mm cross Tee shall be provided @ 610mm centre to centre in both directions and all suitable provisions shall be made for fixing the recessed / surface mounting light fittings if any complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 4mm thick of size 605 X 605 mm, white pre-premiered, self embossed, reinforced designer board for false ceiling conforming to IS-14862 and ISO-8336:1993 fixed / laid / inserted to GI framework at ceiling with screws complete all as specified and directed.

Supply and fixing in repair PVC connection 15mm, 450mm long with nuts and washers complete all as specified and directed.

Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 grade and three parts of sand (all by weight) complete all as specified and as directed.

Material and labour in repairs for double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as defined complete all as specified and as directed.

Repair to Aluminium door including adjusting, necessary bedding, clip, rubber beader, repair to floor door closer complete all as specified and as directed.

Supply and fixing anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

Supply and fixing in repairs anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 No in each door hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

Supply and fixing in repairs anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including anodised aluminium safety grill and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fixing in repairs 5.50 mm thick sheet glass fixing for aluminium doors and windows including 25 micron reflective type sun control film complete all as specified and as directed.

Supply and fixing aluminium (extruded section) body door closer hydraulically regulated designation No 2, universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 and 60 kg and fixed in repairs complete all as specified and as directed.

Supply and fixing in repairs waste coupling of PTMT (half or full threaded) of bore dia 32 mm discharge pipe complete all as specified and as directed.

Material and labour for repairing of existing bib cock by replacing its jumper / washer etc to make it functional complete all as specified and as directed at site.

Supply and fixing brass phase for chromium plated bib tap, pillar tap, angle valve for suitable 15mm dia full turn, half turn as per sample complete all as specified and directed.

Supply and fixing in repairs grating doom 100mm dia without hole chromium plated complete all as specified and as directed.

Supply and fixing in repairs grating doom 100mm dia with hole, chromium plated complete all as specified and as directed.

Supply and fixing in repairs 15mm bore long body bib tap cast copper alloy fancy type chromium plated with capstan handle screwed down, screwed for iron pipe or for brass ferrule as per sample kept in AGE B/R Damana office complete all as specified and as directed.

Supply and fixing in repairs PVC waste pipe 32 mm dia and suitable length straight or flexible type for wash hand basin / sink complete all as specified and as directed.

Supply and fixing in repairs floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate as 150mm complete all as specified and as directed.

Supply and fixing in repairs PVC tank cover for water stoarage tank for 500 litre capacity including locking arrangement complete all as specified and as directed.

Supply and fixing in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and as directed.

Supply and fixing in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) bends of bore 110mm dia complete all as specified and directed.

Supply and fixing in repairs PVC (SWR) bends of bore 75 mm dia complete all as specified and directed.

Material and labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greassy spots etc and applying two coats of white wash on walls complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greassy spots etc and applying one coat of white wash on ceiling complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greassy spots etc and applying one coat of oil bound distemper on wall complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greassy spots etc and applying one coat of oil bound distemper as on ceiling complete all as specified and as directed.

Material and labour for preparation of old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old wooden surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of cement based paint on old prepared surfaces of walls complete all as specified and as directed.

Material and labour for complete removal of existing surface and applying two coats of exterior emulsion paint any colour over one coat of primer up to 12 metre height complete all as specified and directed colored approved by Engineer-in-Charge.

Material and labour for cutting and derooting of tree, shrubs on wall, ceiling, roof, adjacent to pipes, at corner etc upto three storey and making good with PCC (1:2:4) including finishing the surface to match the existing shade complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on other than fair faces of brick surface finished even and smooth without using extra cement etc. complete all as specified and as directed. (Including all necessary scaffolding, lifting arrangement for external surfaces).

Material and labour for rendering 15 mm thick cement plaster (1:3) on other than fair faces of concrete surfaces as on fascia of roof slab, chajja, shelves etc. finished even and smooth without using extra cement (including all necessary scaffolding, lifting arrangment for three storey building on external surfaces) complete all as specified and as directed.

Material and labour for applying two coats of exterior emulsion paint any colour over one coat of primer up to 12 metre height in patches on newly plastered surfaces of fascias, chajjas and roof projection complete all as specified and directed.

Material and labour for preparation of surfaces of any description etc of over head water storage tank of capacity not exceeding 50000 gallons and applying two coats of cement based paint in concrete surface etc and two coats of synthetic enamel paint in steel surfaces (railing etc) on overhead water tank complete in any pattern, shape, description etc as directed including necessary arrangements of scaffolding, safety precaution upto 25 metre height complete all as specified and directed. Note: - Tenderer to be visited the site of overhead tank before quoting the rates.

Shri Karshni Builders

Bidder Name

Shri Karshni Builders

bushan kumar