Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹13.3 L+₹20,921 (1.60%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹13.5 L+₹35,236 (2.69%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
31 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AFA),HYDERABAD
GE(AFA),HYDERABAD, DUNDIGAL
EXTERNAL PERIODICAL SERVICES AND CERTAIN RELATED WORKS IN OMQS 14 AFH AND OFFICERS MESS AT AFA HYDERABAD
2023_MES_593259_1
8345E8
Open Tender
Civil Works
Item Rate
270 days
GE(AFA)
As per Tender Pages
5 documents required · 5 mandatory
₹500
Yes
GE(AFA),HYDERABAD
₹40,000
Yes
17 Jul 2023
4 May 2023
2 Jun 2023
4 May 2023
31 May 2023
16 May 2023
4 May 2023 - 15 May 2023
Amount
M&L for preparing old decorated or unplastered surfaces on walls including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge.
Complete removal of the existing treatment on walls and applying three coats of white wash including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M&L for preparing old decorated or unplastered surfaces on walls including cornices and applying one coat of cement based paint all as specified and directed by Engineer-in-Charge.
M&L for complete removal of the existing old surface on walls and applying two coats of cement based paint over a coat of cement based primer including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying two coats of cement based paint all as specified and directed by Engineer-in-Charge.
M&L preparation of old decorated surfaces of wall including washing, rubbing down and stopping of painted surfaces and applying two coat of Acrylic emulsion paint exterior grade (100% Acrylic) over a coat of primer all complete and as directed by Engineer-in-charge.
M&L preparation of old decorated surfaces of wall including washing, rubbing down and stopping of painted surfaces and applying two coat of Acrylic emulsion paint exterior grade (100% Acrylic) of any shade all complete and as directed by Engineer-in-charge.
M&L preparation of old decorated surfaces of wall including washing, rubbing down and stopping of painted surfaces and applying one coat of Acrylic emulsion paint exterior grade (100% Acrylic) of any shade all complete and as directed by Engineer-in-charge.
M & L for preparing old painted wood and wood based surfaces of any description, exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M & L for preparing old painted wood and wood based surfaces of any description, not exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.
M & L for preparing old painted steel and iron surfaces of any description, exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M & L for preparing old steel surfaces of any description, exc 10 cm width or girth and applying one coat of Aluminium paint complete all as specified and directed by Engineer-in-Charge.
M & L for preparing old painted steel and iron surfaces of any description, not exc 10 cm width or girth applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.
M&L for preparing old chequred / interlocking path surfaces and applying one coat of Weather Coat Floor Protector/ apex floor guard is a pure acrylic water based emulsion for exterior or equivalent, all as specified and directed by Engineer-in-Charge.
M & L Preparation of old painted surfaces on concrete surfaces plain or moulded, of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint ) etc, complete all as specified and directed.
M&L for Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high, with thick Enamel paints, etc complete all as specified and directed by Engr -in- charge.
Cutting out V groove on cracks of walls and cleaning out, wetting, grouting with crack filler (Dr Fixit or equivalent) mixing with cement slurry, making good the surface, as per manufactures instuctions, of any description and in any position, with necessary scaffoldings, as approved by Engr in charge
Cutting down Plants / trees of girth not exc 15 cm from roof tops and sides of external walls of building, chajja wall junctions, junctions of rain water / CI / soil waste / vent pipes including taking out roots entered into the wall / slab surfaces, then spraying the affected area with solution of 25 ml Glyphosphate (4% content) diluted with 1 litre of water or as per manufacture's instructions and making good the surfaces using PCC (1:2:4), type BO or cement mortar 1:3, with necessary scaffolding / stagging etc, any height from ground level, all as specified and as directed. Note: 1. Group of bushes in one place is to be treat one plant and decision of GE shall be binding in this regard. 2. Any PVC pipes, brick works damaged during the execution of work shall be replaced with new one to ensure leak/seepage free joint.
Racking out joints and pointing to on old stone masonry with raised pointing in cement mortor 1:3 complete all as specified and as directed.
Taking down plaster in wall/ceilling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable debris to a distance exc 1.5 Km and n.exc 5 Km complete all as specified and directed by Engr -in- charge.
Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc and removing unserviceable debris to a distance exc 1.5 Km and n.exc 5 Km complete all as specified and as directed.
M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 complete all as specified and as directed.
M&L for brickwork with sub class 'B' old size bricks, straight or curved on plan, exceeding 6M mean radius built in cement mortar 1:6 (for levelling) in parapets, and similar works complete all as specified and as directed.
M&L for half brickwork with sub class 'B' old size bricks, straight or curved on plan, to any radius built in cement mortar 1:4 complete all as specified and as directed.
M&L for plastering in external wall surfaces of 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge.
M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces of ceilling finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge.
M&L for preparation of newly plastered surfaces of external walls and applying two coats cement base paint over a coat of cement primer complete all as specified and directed by the Engineer-in-Charge.
M&L for preparation of newly plastered surfaces of ceiling and applying two coats white wash etc. complete all as specified and directed by the Engineer-in-Charge.
Demolition of precast concrete articles and removing unserviceable debris to a distance exc 1.5 Km and n.exc 5 Km complete all as specified and as directed.
M&L providing precast cement concrete jallies, 25mm thick ( 1:2:4) type B0 (12.5mm graded stone aggregate) and set in CM 1:6, (measured solid), including all mouldings and reinforcement complete all as specified and directed.
Demolition of reinforcement cement concrete (of any description and in any position not otherwise specifically provided for and removing unserviceable debris to a distance exc 1.5 Km and n.exc 5 Km complete all as specified and directed.
M&L for RCC 1:2:4 Type B1 (using 20 mm graded aggregate) as in Beams/bands cantilevers, bressummers, chajjas , lintels over 1.5m span complete all as specified and directed.
M& L for form works to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including support , overhangs etc. for rough finished surfaces complete all as specified and directed.
S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or securing with clips complete all as specified and directed.
S&F mild steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia or securing with clips complete all as specified & directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed by Engr -in- charge.
S&F PVC (SWR) pipes Type 'B'' 110 mm bore single socketed in any length fixed on walls, Floors, Ceiling etc complete all as specified and directed by Engr -in- charge.
S&F PVC (SWR) bends any radius suitable for 110mm bore pipecomplete all as specified and directed by Engr -in- charge.
S&F PVC (SWR) pipes Type 'B'' 75 mm bore single socketed in any length fixed on walls, Floors, Ceiling etc complete all as specified and directed by Engr -in- charge.
S&F PVC (SWR) bends any radius suitable for 75mm bore pipe complete all as specified and directed by Engr -in- charge.
NS Enterprises
Deepika Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .