Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹29.6 L+₹10,685 (0.36%)Rejected-Finance 340 11 M S NATIONAL ENGINEERING CORP 340 11 SATTI STREET ROORKEE ROORKEE HARIDWAR UTTARAKHAND 247667 | HARIDWAR | UTTARAKHAND | 247667 | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹30.5 L+₹1.0 L (3.46%)Rejected-Finance | L3 | Rejected-Finance HIGHER BIDDER | |
| 4 | L4₹31.2 L+₹1.7 L (5.89%)Rejected-Finance | L4 | Rejected-Finance HIGHER BIDDER | |
| 5 | L5₹31.3 L+₹1.8 L (6.15%)Rejected-Finance | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI BIJENDRA SHARMA IDSE EE
GARRISON ENGINEER (NW) VASCO Opposite KV No.2, School, Shantinagar, Vasco-Da-Gama, Goa-403802
8541/E8
2023_MES_599443_1
8541/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
VASCO
Class D Category b i
7 documents required · 7 mandatory
₹500
GE NW VASCO
₹60,000
Yes
9 Aug 2023
30 May 2023
21 Jun 2023
30 May 2023
19 Jun 2023
13 Jun 2023
30 May 2023 - 12 Jun 2023
Amount
Excavation in trenches 1.5 Mtr wide and not exc 1.5 Mtr deepgetting out in hard/dense soil and levelling of bottom surface to required level for laying UG cable/errection of poles complete all as specified and as directed.
Excavation in trenches 1.5 Mtr wide and not exc 1.5 Mtr deep getting out in soft/disintegrated rock and levelling of bottom surface to required level complete all as specified and as directed.
Excavation in trenches by cutting of road crossing/PCC hard standing, under boundary wall for laying of pipe/cable including making good the existing surface with same finish to match the original finish complete all as specified and as directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and as directed.
Removing excavated material of soils from site to a distance not exc 50 mtr away and depositing where directed at a level not exc 1.5mtr from the starting point complete all as specified and as directed.
Supplying & Laying in trenches river Sand for cushioning under ground cable 8 cm below and 15 cm above complete all as specified and as directed. Note: Punned thickness only will be measured and paid.
Supplying & Laying precast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm in trenches to protect under ground cable complete complete all as specified and as directed.
Supply and fix or laying in trenches/on wall/poles/structures as in repairs GI tubing light grade of size 80 mm dia for road crossing/for cable protection/fixing of pigmi lights etc,of the following sizes including necessary provision for cable entry if reqd in pigmi lights pole, fixing MS nut, bolt & washers/MS clamps, as required complete all as specified and as directed.
Ditto all as per item No 8 here in before but of size 50 mm dia
Ditto all as per item No 8 here in before but of size 40 mm dia
Supply and fix in repairs GI tubing medium grade of size 50/65/80 mm dia for pigmi light pole with provision for pole foundation and fixing of pigmi lights etc,of the following sizes or capacity including necessary provision for cable entry if reqd in pigmi lights pole, fixing MS nut, bolt & washers/MS clamps ,reducer as required complete all as specified and as directed. Note:- (a) pigmi light/street light will be measured and paid separeatly under relevant items. (b) pole foundation or coping of foundation will be measured and paid separately under relevant items.(c ) Height of pole above the ground level is appx 1.6 mtr and fixed in foundation upto 0.6 mtr will be cosidered in this items.
Supply and fix in repairs GI tubing medium grade of size 50/65/80 mm dia for pigmi light pole with provision for pole foundation and fixing of pigmi lights etc,of the following sizes or capacity including necessary provision for cable entry if reqd in pigmi lights pole, fixing MS nut, bolt & washers/MS clamps ,reducer as required complete all as specified and as directed. Note:- (a) pigmi light/street light will be measerd and paid separeatly under relivent items. (b) pole foundation or coping of foundation will be measured and paid separeatly under relevant items.(c ) Height of pole above the ground level is approximate 6.0 mtr and fixed in foundation upto 0.6 mtr will be cosidered in this items.
M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate including use and waste of form work of concrete for any description including necessary form work complete all as specified and as directed.
M & L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate including use and waste of form work / mass concrete for coping of poles of description complete all as specified and as directed.
Supply and fix in repairs Galvanised Iron cross arms channel, bracing, support, clamps etc fabricated structured steel, sections, including nuts, bolts, washers etc and cutting to required length bent to any shape drilling holes, fixed on poles or jointed by means of electric welding complete including taking down/dismantling the old items complete in any sub station/installations structure complete all as specified and as directed.
S & F in repairs Pin type porcelain vitreous,brown or white insulator to suit 1100 Volt working pressure of size 100 mm height, 65mm dia, including one galvanised mild steel spindle, two galvanished iron washer and one GI nut complete all as specified and as directed.
S & F in repairs Shackle type Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, of height 100 mm and dia 115 mm having working pressure 1100 volts grade complete all as specified and as directed.
Taking down old unserviceable LT UG cable from any description (trenches, walls, ceilings etc) from various locations, Supply and laying under ground LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 10 Sq mm, 2 core, with aluminium conductor, ISI marked as per IS : 7098( Part-1) along with suitable size aluminium cable lugs, gland if required and jointed in any description complete all as specified and as directed. Note :- (a) Excavation, Concrete cable protection cover, pipe, PCC work for road crossing/hard standing and Sand for cushioning will be measured and paid separately. (b) Cost of glands, aluminium cable lugs (eye lid/barrel/bottle neck type/ring type or any shape) new nut, bolt and washers of required size/description are deemed to include in this rate.
Ditto all as per item No 18 here in before but of size 2 core 16 sqmm
Ditto all as per item No 18 here in before but of size 4 core 16 sqmm
Ditto all as per item No 18 here in before but of size 4 core 25 sqmm
Ditto all as per item No 18 here in before but of size 3 1/2 core 35 sqmm
Ditto all as per item No 18 here in before but of size 3 1/2 core 50 sqmm
Ditto all as per item No 18 here in before but of size 3 1/2 core 70 sqmm
S & F in repairs LT heat shrinkable Straight through cable Jointing kit, complete with jointing material and accessories suitable for 2 core XLPE armoured Aluminium conductor cable of any suitable of size 10 to 16 sqmm complete all as specified and as directed.
Ditto all as per item No 25 here in before but of size 4 core 16 to 25 sqmm
Ditto all as per item No 25 here in before but of size 3.5 core 35 to 50 sqmm
Ditto all as per item No 25 here in before but of size 3.5 core 70 to 95 sqmm
Material and labour for fault finding of LT cables of size 25 to 150 sqmm X 3.5 core and any length with fault detective machine by thumbing method and suitable voltage and all as per manufactures instructions including providing straight through joint and additional cable of same existing size suitable to site requirement complete all as specified and as directed.
M & L for Earthing complete with GI earth plate, electrode,600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) filled with common salt and charcoal mixed with 10% of peddy field earth and connected to GI earth strip 32 x 6 mm thick dia by means of GI nuts, bolts, & washers as shown in electrical plate No. 5 of SSR Part-I and Connected to earthing test point all as specified and including necessary PCC earth pit chamber of 1:3:6 and chamber cover of 50mm thick PCC 1:2:4 with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 40 mm dia unto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and directed by Engr-in-charge including demolish existing earth pit taking out old materials.
M & L for Earthing complete with copper earth plate electrode 600 x 600 x 3.15 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to copper strip size 20 x 3 mm thick by mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earthing strip shall be provided with GI pipe light grade 32 mm dia up to 7.5 mtr from the earth plate electrode and refilling of soil including adequate quantity of charcoal and common salt including 10% of paddy field earth etc & earth work in any strata, PCC pit chamber in cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any typecomplete all as specified and directed by Engr-in-charge including demolish existing earth pit taking out old materials.
S & F in repairs Energy efficient LED street Light Luminaire 60 watts capacity comprises a die-cast aluminium housing including connections with 3 run of 2.5 Sq mm aluminium unsheathed wire multistranded from LT over head line/junction box to the connector of fitting, (connection wires shall not be less than 2.5 metre in length duly run through GI bracket) complete all as specified and as directed. (Make :- Cat No ENXT P 60L WW CR PC SD or equivalent in Philips/Wipro)
Ditto all as per item No 32 here in before but of LED street Light Luminaire 72 watts capacity complete all as specified and as directed. (Make :- Cat NoENXT P 72L WH CR PC SD or equivalent in Philips/Wipro)
Ditto all as per item No 32 here in before but of LED street Light Luminaire 90 watts capacity complete all as specified and as directed. (Make :- Cat No BRTFG 90W LED CR or equivalent in Philips/Wipro)
S & F in repairs LED Cup type street Light Luminaire 20 watts capacity comprises a die-cast aluminium housing incl connections with 2 run of 2.5 Sq mm aluminium unsheathed wire multistranded run through GI bracket complete all as specified and directed by Engr-in-charge.
S & F in repairs LED Energy Efficient & high reliable IP 66 Wellglass luminaire with Cradle & Eyebolt mounting, in-built Loop in-Loop Out facility by metal gland ensures optimization in installation process Light Luminaire 30 watts capacity comprises a die-cast aluminium housing including connections with 2 run of 2.5 Sq mm aluminium unsheathed wire multistranded complete all as specified and as directed. (Make : Bajaj cat No BCLST 20W LED I V2 or equivalent in Philips/Wipro/Luker)
Supply and fix in repairs LED flood light fitting 180 watts made in pressure die cast aluminium housing and reflector and enclosed with toughened glass with IP66 protection complete with all accessories such as LED's and electronic driver, internally prewired including necessary fixing arrangement on PCC pole by providing MS angle iron bracket 50x50x6mm of adequate length as per site requirement with MS flat iron clamp 32x6 mm with necessary nuts, bolts and washers etc and making cable connectioncomplete all as specified and directed by Engr-in-charge. Make:- Bajaj cat part No.BJFL 180W LED I or equivalent in Philips/CG
S & F in repairs integral LED aviation light comprising of aluminium housing with polycarbonate enclosure with necessary fixing arrangement such as GI pipe, fixing clamp, brackets, etc., complete all as specified and as directed. Make: Bajaj Cat No BGAV 302 LED or equivalent in Philips/CG)
S & F in repairs Street light bracket made out of GI tubing 32/40 mm dia, light grade bend to shape of approx length 1.0 mtr long suitable for security/street light fittings with necessary MS clamps - 02 Nos with one coat of anti corrosive primer and two coats of aluminium paint including nut, bolt, washers etc complete all as specified and as directed.
S & F in repairs Street light bracket made out of GI tubing 25 mm dia, light grade bent to shape of approx length 1.0 mtr long suitable for security/street light/Pigmi light fittings with necessary fixing arrangements -with one coat of red oxide and two coats of synthetic enamel paint including nut, bolt, washers etc complete all as specified and as directed.
Supply only LED driver with transformer suitable for 25 to 60 watts LED street/Flood/high bay light fitting of complete all as specified and as directed.
M & L for graded coarse aggregate (broken stone or boulders) of size 40 mm in substation yard complete all as specified and as directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated 3 core stranded copper conductor served with an inner sheathing of PVC tape PVC sheathed 2.5 sqmm nominal cross section in service connection/light connections in garden light from juction box to fittings complete all as specified and as directed.
Supply and fix in repairs cable junction boxes IP 66 protected “halogen free and weather proof” suitable for out door type ( with metric knockouts for cable entry) of size 250 x 200 x 100 mm incl necessary suitable size new aluminium busbar single phase with neutral system mounted on saddles - 02 Nos of suitable length and thickness, provn of aluminium cable lugs for incoming & out going LT cable connections with junction box fixing clamps made up of MS flat, nut and bolt on poles complete all as specified and as directed,
Supply and fix in repairs cable junction boxes IP 66 protected “halogen free and weather proof” suitable for out door type (with metric knockouts for cable entry) of size 300 x 200 x 125 mm including necessary suitable size with cable terminal assy mounted on saddles suitable for 3 phase with neutral system - 04 Nos of suitable length and thickness, provn of aluminium cable lugs for incoming & out going LT cable connections with junction box fixing clamps made up of MS flat, nut and bolt on poles complete all as specified and as directed.
M&L for scraping of old paint from decorative poles for pigmi light appx length 3 mtrs and dia 40/50/80 mm, including breacket of pigmi light cleaning with emery paper and waste cloths, applying one coat of red oxide primer, and two coat of synthetic enamel paint by spray gun of desired colour complete all as specified and as directed.
M&L for scraping of old paint from decorative poles for pigmi light appx length 1.5 mtrs and dia 40/50/80 mm, including breacket of pigmi light cleaning with emery paper and waste cloths, applying one coat of red oxide primer, and two coat of synthetic enamel paint by spray gun of desired colour complete all as specified and as directed.
M & L for removing vegetation, grass, shrubs and bushes or any small tree branches growing in Sub station yard along with fencing, around the pole, under the HT / LT transmission lines, yards or any description by mannually/mechanically and keep the sub station yard neat and clean complete all as specified and as directed. Note :- Unit rate quoted deemed to include to keep the installation neat and clean through out the entire period of contract and each cleaning will be measured and paid.
Supply and laying or fixing or passing through pipe in repairs 1100 volts grade heavy duty cable with PVC insulated 3 core stranded alluminium conductor 1.5 sqmm nominal cross section in service connection/light connections in garden light from juction box to fittings complete all as specified and as directed.
NATIONAL ENGINEERING CORPORATION
sapna enterprises
Shine Enterprises
star freeze service
OM SAI ELECTRICALS
Sai Supreme Constructions
D.K. ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .