Repair and Restoration of the Arulmigu Thiruvenkadathappan Temple Appankovil

Amount

Labour charges for removing the existing cutstone members including numbering , wire charges , tools and plants, scaffolding for working in heights etc complete.

For Pavukal , Wall

For Pillar , Pothiyal and Uthiram

Dismantling the Existing brick work in Lime mortar including cost and conveyance of all materials and all labour charges etc complete ( W- 0013;Pg:21)

Dismantling the Existing Reinforced cement concrete including clearing away from the site etc complete. ( W-0035;Pg:28)

Dismantling the Existing Weathering course lime concrete including clearing away from the site etc complete. ( W-0037;Pg:28)

Supply of cutstone members of same colour the Existing stone structure in the Garpagraham,artha mandapam, Maha mandapam , Thirumathil etc., of approved density and Quality for Garpagraham,artha mandapam, Maha mandapam , Thirumathil and other Temple structures upto 10 feet length including cost and conveyance of all materials and all labour charges etc complete

Labour charges for Palamunai Dressing and Refixing the old & New pavukal, Uthiram Floor slab etc as directed and fixing the same in position with Combination mortar including all labour charges for dressing and fixing in posision as directed etc complete. For Wall

Kabothagam

Pavukal

Uthiram

pothiyal

Pillar

Vyalavari

Chithravanam

Labour charges for Refixing the cutstone Old members including Supporting using steel centring using spans and Jockeys for working in all heights and fixing in position including cost of machineris like cranes , Machince operators , crane operators, Technical labours including cost and conveyance of all materials and all labour charges etc complete.

Pavukal,Uthiram,Pothiyal,Pillar

Chitravanam,Vyalavari

Supplying, drilling, inserting and fixing in position of 16 - 18mm dia high tensile stainless steel shaft of length 210mm, in to the existing cut stone wall ,Uthiram , Pillars Pavukal and Kodungai surface so as to arrest the development of cracks and also to strengthening the existing cracks in the stone structures including cost and conveyance of all materials , scaffolding charges, labour charges for drilling with special tools and fixing in position as directed including hire charges for all tools and plants etc, applying one coat of approved epoxy bonding chemical to the surface of the shaft before inserting and grouting the holes after fixing the shaft in position with cement slurry etc complete as directed by the Departmental officers. For Uthiram

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Plastering Work in LM 1:1.5 (One Lime One and Half sand) with 20mm thick including Cost and Conveyance of all Materials and all labour charges etc Complete.

Brick work using Country bricks in Lime Mortar 1:2 (one Lime and Two sand) 8 3/4" x 4 1/4" x 2 3/4" including cost and conveyance of all materials and all labour charges including curing working in height etc complete.

Earth work Open Excavation for foundation in all soils and sub-soils and to full depth as may be directed except to rock requiring blasting but including shoring strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well consolidated and depositing the surplus earth within the compound with an initial lead of 10 metres and lift of 2 metres in places as shown by the departmental officers and clearing levelling the site etc complete complying with standard specification.

Dismantling the existing PCC including clearing away from the site etc complete (W-0034)

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except to rock requiring blasting but including shoring strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well consolidated and depositing the surplus earth within the compound with an initial lead of 10 metres and lift of 2 metres in places as shown by the departmental officers and clearing levelling the site etc complete complying with standard specification.

Cement concrete 1:5:10 (one cement five M-sand and Ten aggregate) using 40mm gauge hard granite broken stone jelly for foundation including cost and conveyance of all materials labour for mixing, laying, compacting, curing, dewatering, side shuttering, wherever necessary including curing etc.,complete complying with standard specification.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Supplying fabricating and placing in position mild steel or ribbed for steel bar / rods for reinforcement grill for all RCC works including cost of steel and binding wire and labour charges for decoiling cutting binding and tying the grills etc complete complying with standard specification as directed by the departmental officers.

Lime concrete in brick jelly lime concrete using broken brick jelly of size 40mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the Pavement in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Plastering Work in LM 1:1.5 (One Lime One and Half sand) with 12mm thick including Cost and Conveyance of all Materials and all labour charges etc Complete.

Supplying and filling in Foundation and basement with M-sand in layers not exceeding 150mm well watered rammed and consolidated including watering etc., complete complying with standard specification.

Providing New cutstone flooring using cut stone slab 600 X 600 mm and not less than 100 mm thick complete

Three line dressing

Single line dressing

Painting two coats with approved quality of water based exterior emulsion paint including one coat of priming coat in cement plastered wall surfaces in all floor including cost of all materials brushess, etc., scaffolding charges etc., complete complying with standard specification and as directed by the departmental officers.

Restoration by providing water wash and appropriate methodology to restore the originalities of the existing Cutstone structures inclusive of necessary scaffolding charges, conveyance and all hire charges for all tools and plants and clearing the site after completion of work etc, complete

Pointing with Lime mortar 1:1.5 (One lime and One and Half sand ) including cost and conveyance of all materials and all labour charges etc complete complying with standard specification.

Supplying temple type door using teak wood for scantling and planks including cost and conveyance of all materials and all labour charges etc complete

Polishing the teak wood door with two coats of best French (Lac) polish with approved quality and brand over a coat of bee's waxing including preparing the wooden surface to receive polishing, etc., complete complying as per the standard specifications. (The make, quality and colour of french polish, bees vax should be got approved by the Executive Engineer before use on works.)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Scaffolding charges for Vimanans and gopurams with casurina posts coconut of palm trees whereever necessary for main, form work and providing with coonut keeth coverings, providing ladder arrangements, country wood plant for working, inspection etc., complete.-Upto 25' height

Painting with multicolour (Panchavaranam) good emulsion paints complete for the Vimanas/Gopurams, including cost and conveyance of all materials, labour charges including Artist painter, working in helghts, lifting of material cost of brushes etc., complete. - which include all extra for foldings-100 Sft. Superficial area..-Upto 25' height

Supply and fixing of 2"x1" Teakwood reeper on wall along with run of 50mm X 50mm UPVSC casing caping cable trunking box with necessary clamps and screws rigidly in the gap of the stone wall(Data-1)

supply and fixing of single box type 4'20W LED ng with TW round blocks on wall or ceiling WIDVC unsheathed copper leads from terminals to the fitting (LED fittings should be of Higherend company make like philips/cromption etc) (Data) 2)

Supply and fixing of Havells LED lowbay 50W fitting with MS clamp set with bolt and nut and to be suspended with SS chain 32mm width with end hooles with PVC unsheathed copper leads from terminal to the fitting (Data-3

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp (SD-110)/

Supply and fixing of 65mm (2.5") dia G.I pipe (class B) of 6mts length with 300mm x 300mm x 6mm MS plate duly welded at the bottom with cone roofing and construction of masonary pedestal and fixing of PVC synthetic fibre box of 8 nos (8" x 6") to house 6A SP MCB (Legrand make)control switch with 1 no 48W LED (Philips make) complete on the GI post with 1.5Sqmm PVC unshealted copper leads with painting of suitable colour (Data-4)/SD 456

Supply and fixing of 18 nos 6A switches mounted in suitable 18 module Metal surface mounted box with suitable plastic combined cover plate with Connections (Data-5)

Supply and fixing of 12nos 6A switches mounted in suitable 12 module Metal surface mounted box with suitable plastic combined cover plate with Connections (Data-6)

Supply and fixing of 8 module surface mounting box with combined cover plate plastic fixed with 4nos 6A 1 way switch and 2nos 6A Universal Plug with connections (Data-7)

Supply and fixing of 20A DP MCB Switch in suitable 2 pole sheet steel enclosure with earth connection (Data -8)

Supply and fixing of 450mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall (SD-118)

Supply and fixing of louvers shutters arrangements for 450mm (18") sweep light duty AC Exhaust fan (SD-123)

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connections (Data-9)

Supply and run of 2 of 2.5 sq.mm. (36 / 0.3) and 1 of 1.5 sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connections (Data-10)

Supply and run of 2 of 4 sq.mm. (56/0.3) and 1 of 1.5 sq.mm (22/03) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connections (Data-11)

Supply and run of 4 of 16 sq.mm. (101/0.45) and 1 of 4 Sq.mm(56/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connections (Data-12)

Supply and laying of 2 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD-199) 177

Supply and clamping of 2 x 16 sq.mm PVC LTUG armoured cable on post or on wall with MS clamps (SD-217) 195

Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection(SD 1.83)

Supply and clamping of 3-1/2 x 95 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD-226)-204

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection (SD-190 ) -168

Supply and fixing of 8 way single phase and MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 6 Nos 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only (The MCB DB and MCB's should be Legrand or higherend make)

Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type / surface type fitted with busbars and neutral links with single/three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB/Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB/RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB/Isolators (totally 18 nos.) for subincomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm with the following on wall with earth connection only (SD-740)/629

Supply and fixing of 8" x 6" PVC synthetic box for cable connection (Data-14)

Supply and fixing of 125A TPΝ switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection onlys

Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with interconnection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete

Supply and fixing of 65mm (2-1/2") dia G.1 Pipe(class-B) of 6 mts length with 300mm x 300mm x 6mm base plate duly welded at the bottom with Concreting with Construction of masonary pedestal with necessary clamps to hold the LTUG Aluminium Service Cable with painting of suitable colour

Supply and run of 1 of No.8 SWG copper conductor on suitable PVC rigid pipe on wall with painting of suitable colour for earth connection

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and errection of PERC Monocrystalline solar module. with steel mounting structure and accessories like s.s bolts & nuts, washers etc including RCC Concreting for the supports over the Roof top of the temples including transportation

Supply and errection of ONGRID HYBRID Inverter 10 KW 3 phase with DCDB box (Fuse 32A, 32A MCB 64A and SPD 600 V and ACDB Box with 16A MCB, AC SPD (Power make one/EVVO/Die preferable

Supply and run of 4 sq.mm Solar Copper DC cable with MC 4 Connector and y connector 200mm

Supply and clamping of4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

mts Supply and run of 1 of No.8 SWG copper conductor on suitable PVC rigid pipe on wall with painting of suitable colour for earth connection

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and errection of 100Ahr-384V Lithium Ferophosphate Battery with five years warrenty (20.16 unit storage) Charging Voltage 46V to 54V Charging current 50 A, Discharge Current 200A, Battery with metal enclosure and Connectors with 4mts of 25 Sq.mm Copper Battery cable

TNEB Net metering and Application processing including Permission for powerload Export to the TNEB power distribution

Supplying and fixing in position 15/12mm dia Chromium Plated brass screw down tap including cost and conveyance of all material and all labour charges ete complete

Supply and Fixing PVC water tank of 500lit including cost of all materials and labour charges etc., complete

Supplying and fixing in position first quality and approved variety Gun Metal Gate valve (Heavy type) Wheel Valve (Heavy Duty) with ISI Mark of approved quality of the following dia including cost of shellac, ducad, labon charges for cutting, threading, fixing in position etc., for both internel and external water supply arrangements. Gun metal Gate Valve 32mm dia

Supplying laying and jointing following diameter UPVC pipes of super thick of approved quality and best quality conforming to ISS and with ISI mark of the following sizes including cutting threading and fixing UPVC specials but excluding cost of such specials Fixing into Bore well / below ground level for erection of compressor motor, suction line air pipe etc. 32mm dia UPVC pipe

Supplying, laying and joining the following size of UPVC Specials including cost and conveyance of all materials and all labour charges ete complete 32mm x 25mm Reducer Elbow

32mm dia Elbow

Supplying and erecting in position of 50 litres capacity Industrial Model Reverse Osmosis Water cum Purifier to deliver potable water with world health organisation (WHO) standards with following accessories. (a) MS Skid 1No, (b) Media 11054 No. Vessal with 20 nb Multi Port Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50Hp INo (d) Vertical Pump 2-9, 2.00HP/Single Phase Membrane 40x40 flimtech INo. (e) (or) equailaents/Osmonic (USA) -1No. and Membrane Pressure Vessal 40x40-1No & Pressure gauge 2Nos. (f) Flow Metre- 1 No. 20" Filter with Housing-1No, Low pressure Switch-1No, Level Switch - INo & Necessary CPVC Pipes and Fittings. The system shall be provide with Twp Panel Control System with necessary Stainless Valve and Fittings and Float Control etc. The rate should be inclusinve of all civil works wherver necessary to install the system in position and intact. (SOR-M-0720; Pg:77)

P VIJAYA (BID ID -1343325)