Improvment of Black spots on Nalagarh Bharatgarh road at Dhana, Nasrali and Dabhota (SH- providing Speed Breaker Extension of Berms and Road Furniture etc.).

Amount

Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site with a lift upto 1.5 m and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302.3.5, including all leads and lifts as per direction of Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per Technical Specification Clause 405.By Mechanical Means, including all leads and lifts as per direction of Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.By Mechanical Means, including all leads and lifts as per direction of Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.By Mechanical Means, including all leads and lifts as per direction of Engineer-in-Charge.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 – 1.0 kg/sqm using mechanical means. including all leads and lifts as per direction of Engineer-in-Charge.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. including all leads and lifts as per direction of Engineer-in-Charge.

Providing, laying Bituminous Concrete with 100-120 TPH batch type hot mix plant providing of 75 tonne per hours using crushed aggregate of specified grading premixed with bituminous binder @ 5.4 to 5.6 percent of mixer and fillers, transporting the hot mix to work site laying with hydrostatic paver finisher with cencer control to the required grade , level and alignment, rolling with smooth wheeler, vibrating and fonder roller to achieve the desired compection as per MORTH specification clause-509 complete in all respect ( 30 mm. thick), including all leads and lifts as per direction of Engineer-in-Charge.

Providing and laying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic materialby fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe,glass beads dispenser propane tank heater and porofile shoe heater,driven by experiances operator on road surface including cost of matewrial,labour T&p cleaning the road surface of all dirt seals oil grease and foriegn material etc. complete as per the direction of Engineer in charge and accordance with applicable spercification.Including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads, lifts and all incidental charges.

Prpviding & Fixing Solar Blinkers Micro controller based charge regulator Self-Generated,DC operated micro processor Solar panel assembly at site, posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm ( four hundred fifty millimeters in to four hundred fifty millimeters in to six millimeters), 600 mm ( Six hundred millimeters) below ground level., including all leads and lifts as per direction of Engineer-in-Charge.

Providing & Fixing Retro Reflective Tape - High Visibility Silver Vinyl Tape | Premium Heavy Duty, Retro-Reflective Film for Outdoor Features, Safety Vest, Attic Stair Railing, Camper Stairs, Driveway, High Intensity Reflective Conspicuity Tape, Superb night time reflectivity and visibility, this ECE104 reflective tape can be seen up to 1000 meters away at night designed for application to the painted aluminium or steel surfaces of rigid sided vehicles, this high quality durable reflective tape provides superb night time visibility. It improves the safety of HGVs and will help to reduce accidents and save lives. This reflective tape is compliant with regulation UN ECE104 and carries the mandatory 'e-mark' which must be printed on the reflective tape to symbolize requirements of the regulation have been achieved, including all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701, including all leads and lifts as per direction of Engineer-in-Charge.

600 mm circular

900 x 300 mm rectangular

600 mm equilateral triangle

Repair of RCC railing to bring it to the original shape, cleaning and repainting as per drawings and technical specification Clause 1911, including all leads and lifts as per direction of Engineer-in-Charge.

Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701, including all leads and lifts as per direction of Engineer-in-Charge.

IMRAN KHAN

Chuni Lal