Repair/replacement of roof sheet, false ceiling, valley gutter, ease board, purlins and rafters at OTM accn at Dhar Road under GE Army Dhar Road

Amount

Dismantling of AC corrugated/CGI sheet , any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping complete all as specified and as directed. (Make:- Jindal, TATA & JSW)

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. (Make:- Jindal, TATA & JSW)

M&L for 6 mm thick corrugated or semi corrugated sheet fixed with 'J' type hook bolts in roof walls etc complete all as specified and as directed.

M&L for asbestos cement one pieces plain angullar ridge 6 mm thick fixed with 'J' type hook bolts complete all as specified and as directed.

S&F galvanised 0.63 mm corrugated mild steel sheeting with two corrugations side lap fixed with 'J' type hook bolts in roof wall etc with grade of zinc coating 275 complete all as specified and as directed.

S&F plain galvanised 0.63 mm mild steel sheeting in ridges, hips, valley gutters drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots all as specified.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

Supply only liquid water proofing compound (Makes :Pidilite Industries / Impermo /Snowcem India Ltd / Sika )

M&L for 10 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:6, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

Preparing new plastered surfaces of walls and applying two coats of cement base paint, over a coat of alkali resistant priming paint (including two coats of exterior emulsion paint (Weather Coat) over a coat of priming paint on roof boarder, drops, fins, chajja / roof facia, column etc) complete all as specified

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and as directed.

All as per item Srl No 14 above but except bricks

M&L for preparing new plastered surfaces and applying two coats of OBD on new plastered surfaces over a coat of primer of any description of approved tint complete all as specified and as directed.

M&L for preperation of old surfaces plastered or unplastered by mechanical sander, brooming down or steel wire brushing, scraping down oil & grease spots etc and applying one coat of acrylic distemper/distemper oil emulsion (OBD) on walls incl cornices with roller all as specified and as directed by Engr-in-Charge.

M&L for preperation of old surfaces plastered or unplastered by mechanical sander, brooming down or steel wire brushing, scraping down oil & grease spots etc and applying one coat of cement base paint on wall surfaces complete all as specified and as directed by Engr-in-Charge

M&L for one coat of exterior emulsion paint (Weather Coat) case of roof boarder, drops, fins, chajja / roof facia, column, walls etc, including preparation of old surfaces complete all as specified and as directed.

M&L for preperation of new surfaces and applying three coats of white washing on old wall surfaces of approved tint over new plastered surface, complete all as specified and as directed.

Preperation of old surface plastered or unplastered by mechanical sander, brooming down or steel wire brushing scraping down oil & grease spots etc and applying One coat of white washing on wall surfaces incl cornices complete all as specified and as directed by Engr-in-Charge

M&L one coat of synthetic enamel paint over old painted steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and as directed.

M&L one coat of synthetic enamel paint over old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and as directed.

M&L one coat of synthetic enamel paint over old painted steel & iron surfaces of any description, not otherwise described, n exc 10 cm in width or girth, including preparation of surfaces complete all as specified and as directed.

Demolition of cement concrete un reinforced, of any description any position complete all as specifie.

M&L for providing cement concrete type 1:2:4 type B-1(20 mm graded agg ) as in parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates complete all as specified.

Dismantling wall and ceiling board (fibre, pulp, insulation etc or insulation boards/slabs/blankets any thickness incl cover fillets.

S&F Non Asbestos cement bldg board 4mm thick fixed to MS frame work with screws as in ceiling specified and directed.

All as per item Srl No 28 above but except sheet

Providing & fixing false ceiling with gypsem based ceiling tiles and frame work ( with aluminium foil on one side) of size 595x595 mm of thickness not less than 9 mm incl with GI powder coated frame angle/tee grid frame work for ceiling with following specification (a) S7F Angle of side 25x25x1 mm powder coated (b) 25x25x1 mm GI powder coated at bottom tee as in main member (c) 25x25x1mm thick GI powder coated at bottom tee as in cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains levelling incl fixing to ceiling fasteners manufacturers instructions complete. Make: VINYL TOUGH LaGyp (LAFARGE) or equivalent in GYPROC (SAINT GOBAIN)

Preparing old decorated of ceiling surfaces applying a coat of white wash complete all as specified.

Preparing new ceiling surfaces applying two coats of white wash complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F MS Rolled sections as in main and cross beams, hip and jack rafters; purlins whre connected to common rafters and running rails fixed with angle cleats or other connecting plates

S&F PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips, complete all as specified.

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified

Dismantling of pipes of any type or description including all fittings and accessories, 110mm, 100mm and 75mm dia and in any position all as specified.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; door frame, and similar work conforming to Fe 290 Gde-E-165 all as specified .

M&L for Welding in repairs n. exc 2.5cm in length all as specified and as directed.

M&L For taking down existing roof treatment of any description and any type all as specified and directed by Engr-in Charge

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 kg of cement per Sqm all as specifiedm and directed

Priming the roof surface with bitumenous primer confirming to [email protected] ltr/Sqm and applying a coat of hot blown 85/25 grade bitumen confirming to [email protected] Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered ) of weight not less than 3 Kg/Sqm with center layer core of 90micron high molecular density polythene film followed by another coat of semi hot blown 85/25 grade bitumen @1.20 Kg/Sqm blended with fine sand in dry condition @ 0.50Kg/Sqm all as specified (Make of polymeric water proofing membrane :M/S IWL India Ltd and M/S STP Texas Ltd/Bengal Bitumen)

Supply only liquid water proofing compound (Makes :Pidilite Industries / Impermo /Snowcem India Ltd / Sika )

MAHADEV ENTERPRISES

TARUN BUILDERS

SHIVAE CONSTRUCTION

DAVINDER SINGH

S.K CONSTRUCTION