Networking and electrical w...

Amount

Supply and Installation of L2 Poe Switch: Switch with at least 24 X 10/100/1000 Mbps PoE Ports and 4 x 10G SFP plus Ports.Switching capacity should be 128Gbps or higher or non-blocking architecture.Packet forwarding rate should be 95.24 Mpps or higher or non-blocking architecture. Should Support IEEE 802.3af and at compliance (for PoE ports) and 370W Power Budget. MAC table should be at least 16K or higher standard 19 inch 1U rack mountable. Support for the Energy Efficient Ethernet (IEEE 802.3az) standard. Power input should be 100 to 240 VAC, 50/60 Hz, internal power supply. Operating temperature should be -5 degree celsius to plus 50 degree celsius. Should support Head of Line blocking prevention for lower latency and better performance. Support Jumbo Frame up to 12K Bytes or higher. Should support IGMP Snooping, Able to create 250 or more IGMP groups and require support for IGMP Snooping Fast Leave,IGMP Snooping Querier. Support MLD Snooping, Able to create 250 or more MLD groups, Per VLAN MLD Snooping and require support for MLD Snooping Fast Leave. Should have 802.1D STP, 802.1w RSTP and 802.1s MSTP Spanning Tree Protocol. Support Spanning tree Root restriction. Loopback detection (LBD) to detect the loop created by a specific port. Multicast Filtering to filters or forward all unregistered groups. Should support IEEE 802.1Q VLAN tagging for Ethernet frames. Different type of VLAN like Port based, Auto Surveillance, Auto Voice, Asymmetric Vlan etc. should be available for configuration. Switch should support QoS (quality of service) IEEE 802.1P for traffic prioritization. It should support 8 queues per port. Different type of QoS priority like Strict Priority Queue and Weighted Round Robin. Port based ingress / egress rate limit function should be available with limit in increments as low as 16 Kbps. Switch should support Neighbor Discovery (ND) protocol for IPv6. Support to create atleast 4 IP interface. Should support default routing and static routing with minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries. Support at least 700 rules shared by IPv4, MAC, and IPv6 and Each rule can only be associated with a single port. Should support port security to secures the access port based on MAC address. Should have broadcast, multicast, and unicast storm control to prevents faulty end stations from degrading overall systems performance. Support Traffic Segmentation to restricted traffic flow from a single or group of ports, to a another group of ports. SSH and SSL for IPv4 and IPv6. Require prevention of DoS attacks, which include Land, Blat, TCP Null Scan, TCP Xmas Scan and TCP SYNFIN. 802.1X port based authentication. ARP spoofing prevention. DHCP snooping and DHCP server screening. Able to create a binding table for IP plus MAC plus Port to prevents a malicious user from spoofing or to restrict the unauthorized users. 802.1X RADIUS and local server database authentication. Option to check the status of copper cables using the cable-diagnostics time domain reflectometer (TDR). Able to manage trough Web-GUI, CLI, Telnet and SNMP. Support SNMP v1, v2c, v3 and SNMP Traps and Remote Monitoring (RMON). Dual Image support to reduced down time for the switches. Switch should support dynamic host configuration protocol (DHCP) auto configuration of multiple switches through a boot server eases switch deployment. Have SNTP/NTP protocol for time synchronization. IPv6 Ready Compliance. Should support Link Layer Discovery Protocol (LLDP) and LLDP-MED. Certification: CE, FCC, BSMI, RoHS and cUL.Make-Cisco/Dlink/Juniper

Supply and Installation with Configuration of WI-FI-4x4 Wi-Fi 6 access point-Wi-Fi Certified 6TM,Ultra-fast 802.11ax, 4x4:4 2.5 Gigabit Ethernet uplink port 160MHz client bandwidth support Mesh backhaul operating at 160MHz1 Wi-Fi CERTIFIED 6TM (Wi-Fi 6) MU-MIMO performance Smart mesh Wi-Fi support Integrated Bluetooth Easy-to-use web and mobile app for setup and management Secure guest Wi-Fi with simple setup ,Future-ready WPA2/WPA3/OWE authentication for secure Wi-Fi access.Features of the AP include orthogonal frequency-division multiple access (OFDMA), multi-user MIMO and target wake time (TWT). With up to 4 spatial streams (4SS) and 160MHz channel bandwidth (HE160), the AP provides groundbreaking wireless capabilities for businesses looking to boost performance and future-proof their networks.MULTIUSER, MULTIPLE INPUT, MULTIPLE OUTPUT (MU-MIMO) AP supports MIMO, allowing service to multiple clients (Wi-Fi 5 and Wi-Fi 6) at the same time.MULTI-SITE MANAGEMENT with SMART MESH.RADIOS Dual radio for simultaneous dual-band operation 5 GHz 802.11ax 4x4 MIMO for up to 4.8 Gbps wireless data rate, with Multi User MIMO support (Wi-Fi 6) 2.4 GHz 802.11ax 2x2 MIMO for up to 574 Mbps wireless data rate (Wi-Fi 6).PHYSICAL SPECIFICATIONS 200mm x 200mm x 45mm, excluding mount accessories Weight: 775g.INDUSTRY CERTIFICATIONS EN 60601-1-1 and EN 60601-1-2 (for deployment in medical environments) Wi-Fi Alliance certified (WFA) 802.11ax with (Wi-Fi 6), WPA2, WPA3.MAXIMUM (AGGREGATE, CONDUCTED TOTAL) TRANSMIT POWER (LIMITED BY LOCAL REGULATORY REQUIREMENTS) 5GHz band: plus 24dBm ( plus 18dBm per chain, 6dB MIMO gain) 2.4Ghz band: plus 21dBm ( plus 18dBm per chain, 3dB MIMO gain).INTERFACES Uplink 2.5 Gigabit Ethernet port, with PoE-in support (802.3at).MAKE CISCO/ARUBA HPE /Ruckus

Supply and Installation-9 U Rack with PDU and Accessories Wall Mount 12U x 550 W x 500 D ,1U Cable Manager ,Roof Mounted Fan Unit / 90 CFM / 230V AC ,6 Way 5 Amp Power Distribution Unit ,Mounting Hardware Kit , Conforms to DIN 41494 OR equivalent ISO Standards ,Adjustable 19” equipment mounting verticals provide the better mounting flexibility, and maximizes the usable mounting space ,Depth adjustable mounting slots ,Front Glass Door with Lock ,Top and bottom Panel with ventilation and cable entry facility Provision to mount the cooling fans on the top panel ,Powder coated finish with Seven Tank pretreatment process meeting all industry standards ,Grounding and Bonding Options. 100% assured compatibility with all equipments conforming to DIN 41494 (General industria lstandard for equipments) ,Bid specific OEM authorization is required. In MAF with OEM details such as name, designation, address, e- mail Id and Phone No. required to be furnished along with the bid. MAF can be VERIFIED WITH OEM During Technical Evaluation of Bid. Work with proper Rack Dressing and Numbering

Supply and Installation-Category Patch Panel should be 24 Port 1U Size loaded with 24 port RJ-45 IO /Jack,Mounts in standard 19 inch racks,Patch panel should have rear cable manager for improvement management,Patch panel suitable for Category 6 keystone,Panel material should have SPCC with 1.5mm thickness and Black Color,Support bar material should have SPCC with 1.5mm thickness and Black Color,RJ-45 jack housing should be PBT plus Glass fiber UL94V-O and Contact brackets should be PBT plus Glass fiber UL94V-O,Rj-45 contact material should be phosphor bronze with nickel plated and plug contact area finish with 50 micro-inches Gold plated, Rj-45 jack life should be 700 times minimum,Operating temperature should be -10° Celsius to 60° Celsius. OEM for the cable Box and all copper Accessories should be from same OEM ,Bid specific OEM authorization is required. In MAF with OEM details such as name, designation, address, e- mail Id and Phone No. required to be furnished along with the bid. MAF can be VERIFIED WITH OEM During Technical Evaluation of Bid. I/O with Face plat ( Singel i/o point and Box Make Molex/Dlink/Commscope

Supply and Installation- I/O Box Setup with all Material ( I/O,FACE PLATE,BOX Connector)Category 6 keystone jacks are RJ45, 8 position 8 contact socket , Category 6 keystone jacks are suitable for 22-26 AWG stranded and solid wire , Category 6 keystone jacks are compatible with both 110 and Krone punch down tools ,The Category 6 keystone jacks shall be backward compatible with Category 5e, 5 and 3 cords and cables ,It compliance with ANSI/TIA/EIA 568 C.2 standard , The Category 6 keystone jacks shall be of a universal design supporting T568 A and B wiring , Color of Keystone Jack: White. Mechanical Characteristics . Category 6 keystone jacks housing made from PC, UL 94V-2 material , RJ45 Jack contact material should be phosphor bronze with nickel plated. Finished with 50 micro-inch gold plated on plug contact area ,IDC Housing made from PC, UL 94V-2. Terminal material should be Phosphor bronze with tin plated, Should have IDC CAP and material of IDC Cap should be PC, UL 94V-2 ,Performance Characteristics .Current rating should be 1.5A , Operating Temperature should be -10° Celsius to 60° Celsius , Life of Jack should be 750 cycles minimum (ISO/IEC 11801 / IEC 60603-7-. OEM for the cable Box and all copper Accessories should be from same OEM ,Bid specific OEM authorization is required. In MAF with OEM details such as name, designation, address, e- mail Id and Phone No. required to be furnished along with the bid. MAF can be VERIFIED WITH OEM During Technical Evaluation of Bid. I/O with Face plat ( Singel i/o point and Box Make Molex/Dlink/Commscope.I/O BOX ( Punching) Bunching,Puching,Numbering ,Testing and configuration of I/O both the side filed and server/ switches

Supply and Installation-Category 6 patch cords 1 /2 Mtr with four pair twisted cable terminated with RJ45 modular plugs at both the ends,Patch Cord should have TIA/EIA 568C.2 standard.,Shall be backward compatible with Category 5 and Category 5e systems, Category 6 patch cord should be 100% factory made and performance tested,Category 6 patch cord length requires – 2 meter/ 1 meter,Color code for Patch Cord: Grey,Performance Characteristics ,Patch cord conductor should be 24 AWG, multi-strands ,Patch core conductor metal should be made from bare copper,Insulation material should be high density polyethylene,Patch cord jacket should be LSZH,Modular Connector/Plug Characteristics,Patch cord plug should be gold plated,Contact blade of plug should be made from copper / alloy,Insertion cycle should be 750 times, Temperature range should support from 10° Celsius to 60° Celsius. Make digisol/Dlink/Commscope

Supply and Installlation of Heavy Duty Floor race way ( 19L*9w*CM) Make:- TARKAS or equivalent make complete in all respect with the prior approval of EIC.

1 Kva UPS with Wall Mount. (Microtek/APC/ETON ) with Power point and Power cable

P/F of PVC BOX 8x3 complete in all respect as per approval of EIC.

P /F of PLATE 8x3 complete in all respect as per approval of EIC.

Supply,Laying and Testing 3*1.5 sqmm wire (3 pair cable), Flame Retardent(FR), Multistrand Make Polycab /Ancor / KEI

Bidder Name

Amount

ipinfotec (GSTN-NA) BID ID -1242359

OL TECH SOLUTIONS (GSTN-NA) BID ID -1237675

WEASSEMBLERS PRIVATE LIMITED (GSTN-NA) BID ID -1240253

WEASSEMBLERS PRIVATE LIMITED (BID ID -1240253)

ipinfotec (BID ID -1242359)

WEASSEMBLERS PRIVATE LIMITED (BID ID -1240253)

ipinfotec (BID ID -1242359)