Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹8,655
Closing Date
2 May 2024, 1:00 pmClosed
S.E, EUCC-V, LESA, Cis-gomti,Lucknow
Room No. 61, LESA Bhawan Near Residency park, Kaierbagh, Lucknow-226018
74/EUCC-V/LESA/2023-24
2024_MVVNL_920810_1
74/EUCC-V/LESA/2023-24
Open Tender
Electrical Works
30 days
33/11 kv s/s Shakuntala Mishra
As per tender specification
2 documents required · 2 mandatory
₹1,180
A/c. No. 10101985364, IFSC CODE No.SBIN0003347,SBI
₹8,655
16 May 2024
30 Mar 2024
2 May 2024
30 Mar 2024
2 May 2024
30 Mar 2024
Amount
Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Daliganj to JE dumps store and from JE dump store to work site within municipal area.
33KV 3X300 SQ MM XLPE CABLE
33 KV ST/TH C/J KIT 3X300 SQ MM
33KV END TERMINATION O/DOOR 3X300 SQ MM
ST Pole 11 Mt Long
V type channel Cross Arm (100x50mm)
33KV Pin Insulator
33KV Pin with Nut
M S Earthing Rod 20x2500 mm
Stay set 20x1800 complete
Stay wire
MS Angle 65X65X6 MM
GI wire 6 Swg
33 KV pin insulator
Top chanel 100X50 MM 10 kg / mtr
MS angle 65x65x6MM 5.8 kg / mtr
33 KV pin with nut
M S Earthing Rod 20x2500 mm
LT XLPE Cable AL.1X400 Sq.mm.
33KV Disc Insulator B &S. Type 7000 Kg
Disc Fittings Dog/Racoon 7000 Kg
Top chanel 125X65MM
M S Earthing Rod 20x2500 mm
Stay rod 20x1800 mm Complete
Stay Wire 7/8 SWG
33 KV LINE ISOLATOR 800 AMP
MS Angle 75x75x6, 2.6M 2 Nos Total [email protected] Kg./M with wastage
ACSR PANTHER CONDUCTOR
Fabrication & erection of single pole for 33 KV line on 11 M long ST Pole with fixing of necessary clamp & other acessories like 1 no. Channel cross arm, Danger board, No Plate, barbed wire etc. contractor shall provide, necessary clamps, F-Bracket etc. as per RESPO norms.
Fabrication & erection of 33 KV cable exposure type double pole with the provission of separate bus bar for each cable with fixing of necesory clamps and other acessories like danger board,number plate,barbed wire, 9 no. pin insulators with pins,2 no. channels 125x65 mm (1600mm each),1 no.MS channel 125x65mm(3200mm in length) and 2 no.MS angle 65x65x6 mm (each 3200mm in length ) for supporting the hoisting of cable & poles.its jumpering by single core PVC aluminium cable with proper size of lug. (all material arranged by contractor except steel,pole,PVC aluminium cable & insulator).as per RESPO norms.
End Type Double Pole- Fabrication, erection, of double pole of end terminations with one side cable exposure for 33 KV line on 11 M long ST pole with fixing of necessary clamps & other accessories like disc insulator, 1 no. top chennel 125×65 mm - 3.20M & 1 no. gaurding angle and 1 no. X bracing,disc fittingits,33kv pin with pin insulator ,danger board,number plate,barbed wire,jumpering by PG clamp 4 no stay complete work (all material arranged by contractor except steel,insulator,disc insulator with fitting & pole).as per RESPO norms.
Erection of single stud pole support one ST pole 11 M long with fixing of necessary clamps and other accessories required for erection.
Laying of 33 KV XLPE cable
D/C Cable laying in normal soil by digging of trench 1100 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable)
Cable laying By dirll method D/C
Cable laying By dirll method Single circuit with MS/ GI Pipe 160 mm dia
Digging of Pit in kachcha/Pakka land in 1.2 mtr deep 3 mtr long and 2 mtr wide for 33 KV ST/TH 3x300 sq mm and boxing with brick sand and stone slab as per norms.
Hoisting of 33KV XLPE cable on double pole with GI pipe of size 5/6" dia 3 M long including its jumpering complete with clamps, nuts and bolts(all material arranged by contractor).
Hoisting of 33 KV Cable on cable stand
Stringing & Sagging of three phase 33 kv line on ACSR panther conductor as per RESPO Norms.
Stringing and sagging of three nos. Earth/GI wire withh caddle guarding of above 33 kv line as per RESPO Norms. Shifting of existing line conductor of 11 Kv/LT lines to maintain proper clearence in between both lines.
Guarding of O/H Line (50 Mtr span)- Fabrication and fixing of gaurding angle on single/double Polesr as per RESSPO Norms including provision of all necessary clamps and hooks.Shifting of existing line conductor of 11 KV/LT lines to maintain proper clearence in between both Lines.(all the material arranged by contractor except steel and GI wire 6 swg)
Ordinary Earthing of pole by M.S. Earthing Rod 20x2500 mm as per Resspo Norms only earting rod provided by deptt
Extra Stay Set - Nozzillling & grouting of stay set .(all the material except stay set will be arranged by the contractor )
Grouting,Plinting and Painting of new erected 11M long ST poles of single pole support,double pole cable exposures and end type poles of 33 KV lines
Digging of Pit in kachcha/Pakka land in depth upto 1/6 length of Pole, Dragging of STP from near by place/Dump, Erection of Single pole along with stone pad in bottom with proper alignment of line for 33 KV line on 11 M long ST Pole and refilling with ramming of earth.
Grouting of pole in depth of 1/6 the length of pole in ratio 1:4:8 in cement sand and brick balast as per RESPO norms.
Construction of pole plinth 300mm x 450 mm above ground level in 1:2:4 in cement, coarse sand and stone gritt as per RESPO norms.
Painting of new erected ST pole with two coat of red oxide paint,PO red paint at top of pole 2 M & balance by two coats of best quality aluminium paint ISI of Burger/Nerolac/Asian mark as per norms.
High Pressure Testing and fault location of 33 cables/line/ as per norms
S.M.ENTERPRISES
SIDDHI ENTERPRISES
P.S. ENTERPRISES
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid