REPAIR TO WALL PANELLING ROOF SHEET FALSE CEILING WOODEN FLOORING ETC TO CERTAIN BLDG AT ZONE I AND II OF NURLA MIL STN UNDER AGE (I) NIMU

Amount

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-in-Charge.

0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete and all as specified and directed byEngr-in-charge.

0.63mm thick Plain, Galvanised, mild steel sheeting in ridges, hips, valley gutters straight flashings and etc (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed by Engr-in-charge.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.63mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-charge.

Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.63mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed by Engr-in-Charge.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance piece, cleats etc Fe 410-W (Gde - E - 250) Quality 'A', complete all as specified and as directed by Engr-in-Charge.

Applying two coat of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd, complete all as specified and as directed by Engr-in-Charge.

Applying two coat of synthetic enamel painting to old surfaces steel based exc. 10 cm width/girth including preparation of surfaces, complete all as specified and as directed by Engr-in-Charge.

Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets, complete all as specified and as directed by Engr-in-Charge.

9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls, complete all as specified and as directed by Engr-in-Charge.

9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling, complete all as specified and as directed by Engr-in-Charge.

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work, complete all as specified and as directed by Engr-in-Charge.

2nd class soft wood in plain fillets. exc. 13 and n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and as directed by Engr-in-Charge.

2nd class soft wood in plain fillets. exc 3 & n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one or both edges or face as in beading, complete all as specified and as directed by Engr-in-Charge.

Demolition of Matting or wooden flooring, single or double any type including, bamboo framing or bamboo supports, cover fillets, if any complete all as specified and directed by Engr-in-charge.

Providing and laying linoleum, plain coloured, carpet sheet floor covering 2 mm thick, including stretching, cutting and fitting, duly sealed down with an approved adhesive, complete all as specified and as directed by Engr-in-Charge.

Providing and laying Laminate wooden flooring (Grade AC3 or AC3+ laminates) 6 mm to 12 mm thick, having core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer, complete all as specified and directed by Engr-in-charge.

Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, complete all as specified and directed by Engr-in-Charge.

PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate ) as in block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:4, complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed by Engr-in-Charge.

Rendering 10 mm thick cement plaster on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Rendering 15mm thick cement plaster in cement mortar (1:4) on brick work or concrete surface and finished surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Preparing new plastered surfaces of walls and applying three coats of white wash on walls, completre all as specified and directed by Engr-in-charge.

Preparing new plastered surfaces of walls and applying two coat of distemper oil emulsion on walls, complete all as specified and directed by Engr-in-charge.

Preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer, complete all as specified and directed by Engr-in-charge.

Preparing old plastered surfaces of walls and applying one coat of white wash on walls, completre all as specified and directed by Engr-in-charge.

Preparing old plastered surfaces of walls and applying one coat of distemper oil emulsion on walls all as specified and directed by Engr-in-charge.

Preparing old plastered surfaces of walls and applying one coat of cement base paint, complete all as specified and directed by Engr-in-charge.

M/S INDUS HIMALAYAN EXPLORERS

M/S TSERING ANGCHOK