REPAIRS TO SUNKEN FLOOR TOILETS DADO PLUMBING CEILING AND CONNECTED WKS IN ZONE B AREA AT NDA KHADAKWASLA

Amount

Dismantling floor, hearth or wall tiling including cement mortar rendering , bedding , removing serviceable tiles to store and rubbish off the premises

M&L glazed ceramic joint free tiles 350x450x7mm thick on vertical surfaces such as skirting/ dado laid over and including 10 mm thick backing coat in CM (1:3) set and jointed in neat cement slurry and pointed in white or coloured cement to match. As specified by engineer in charge

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directe

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beded & pointed any type of morter

M&L granite (of any type) work (table rubbed 7 polished ) in window door cills/jambs , platform like in cement morter (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite 16 to 18 mm thick including taking down old one complete all as directed.

M&L for granite 25 mm thick for urinal partition/ vertical surfaces etc. in cement morter 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite 20 mm thick complete all

M&L 20mm to 25mm thick unpolished cuduppah stone slab as in below granite stone and vertical support and like incl necessary jointing and pointing and making good to disturbed surface complete all as specified

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L granite work (lakha red) (table rubbed 7 polished ) hick granite stone slab (of any type ) work (table rubbed and polished ) as in floor, steps,, jambs, pillars, window cills, laying over 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges,surfaces all as directed .

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and including polishing complete over and including 20mm thick screed in CM 1:6

Demolition of cement concrete in ground floor & pavings n exc 15cm thick (below or above ground level)

M&L for 100mm thick PCC (1:4:8) ty D2 (using 20mm graded stone aggregate complete all as specified and directed.

Supply only intergal water proofing compound

M& L for sunken treantment to Floors of toilets/Baths/WCs/Kithcen as under :- (a) Clean the sunken portion of toilet/Bath/WC/Kitchen throughly to remove laitance, dirt, dust, etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or eqvt) (c) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape" and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or eqvt. Nahani traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or eqvt on all angle fillets by brush and cover it with 100 mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry sustrate condition brush apply first coat of the same coating and further apply second coat when first coat is dry. Extend the coating upto 150 mm above the FFL. Above FFL, another cementitious waterproof coating "Dr Fixit Pidifin 2 K" or eqvt can be further applied right upto 2.1 mm to waterproof the shower area also, it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with intergral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 100mm 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/ Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready-to -make Tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc

Supply and fix in repairs 40mm spouts pipes /Tubes, 'Medium grade galvanised, with all fitting and fixed complete to walls or in sunken floor all as directed

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) ty C1(using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) not exc 10cm in width and set and jointed in Cement Mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc

M&L plastering 15 mm thick in CM 1:6 finising even & smooth without using extra cement on wall .

M&L plastering 10mm thick in CM 1:4 finising even & smooth without using extra cement on ceiling .

De-watering of water from OH tanks of any size completely cleaning the tanks throughly by using coastic soda/ bleaching powder.

M & L for roughing of existing plaster surfaces by dubbing out average 5 mm thick, in CM (1:4) on wall & floor of water tanks.

M&L Rendering plaster 15 mm thick on any faces of brick work or concrete surfaces with CM 1:3 including mixing of integral water proofing compound 3 % by weight of cement all as directed (Water proofing compound shall be measured and paid seperately) finished even & smooth of without using extra cement.

M&L Preparation of new plasterred surfaces of walls and applying 2 coats of food grade Home shield Latex shiel 2K on an interval of 6 hrs. Before filling water let it cure for 7 days Rinse twice before finally filling the water Make of Paint Berger or equivalent as approved by Accepting Officer.

Taking down up or down steel tubing and connections incl cleaning for re-fixing or removal to stores ,15mm dia pipes complete all as specified and directed.

Taking down up or down steel tubing and connections incl cleaning for re-fixing or removal to stores ,20mm dia pipes complete all as specified and directed.

Taking down up or down steel tubing and connections incl cleaning for re-fixing or removal to stores ,40mm dia pipes complete all as specified and directed.

M&L Tubes, MEDIUM grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 15mm bore of pipes

M&L Tubes, MEDUIM grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 20mm bore of pipes

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting exceeding 10cm girth in brick/stone wall

M&L Tubes, 'heavy grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 40mm bore of pipes

S & F in repairs Bib taps cast copper alloy 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc .(long body DLX-512Make Jaquar )

S&F in repairs central hole basin mixer without pop up waste system with 450 mm long braided hoses Make Jaquar Cat Part No 167 KNB

M&L in repairs for providing two way bib cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup (Make : Jaquar Cart Part No CAN-FLR -5041 N)

M&L in repairs for shower arm,15 mm dia bore, 450 mm long with 90 degree bend for rain showers. (Make:-Jaquar cat No. SHA- 479L450)

M&L in repairs for shower 120 mm dia round shape multi flow with casecade effect (ABS Body Chrome plated with gray Face Plate ) with rubit cleaning function . (Make:-Jaquar cat No. OHS - 1779)

S&F in repairs hand shower (health faucet) with 8 mm dia, 1 mtr long flexible tube and wall hook (Make : Jaquar Cat No. ALD-CHR 593)

S&F in repairs, wall mixture brass CP for mixing hot and cold water with connection to overhead shower with 115 mm long bend pipe and wall flange, screwed down for iron pipe and fixed for 15mm bore of pipe. (Make - JAQUAR Cat No FLR- 5273 UPR )

S&F in repairs Stop valves,angular, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 15mm bore of pipe

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 15mm bore of pipe

S&F in repairs Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 25mm bore of pipe

S&F in repairs 40MM gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repairs Vitreous china wash down water closet (Pedestal pattern) with P or S trap , white in colour including fixing bolts, connection to drain and to flushing pipe

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets

S&F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S&F in repairs wash basins, vitreous China 520 mm x 450 mm type any size, fixed in Granite stone including waste fittings ,but exclusive of fixing of supply and waste pipe complete all as specified and directed by Engr-in-Charge. Make : Cera Clair cat no 1023)

M&L in repairs 32 mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45gms/40mm-60 gms) for WHB

M&L in repairs 40 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45gms/40mm-60 gms) for WHB

M&L In repairs 32 mm dia of bore bottle trap having minimum water seal of 25 mm (Minimum weight 32 mm-260gms/40mm-270 gms)

M&L In repairs 40 mm dia of bore bottle trap of PTMT having minimum water seal of 25 mm (Minimum weight 32 mm-260gms/40mm-270 gms)

S&F in repairs vitreous china urinal,half stall type (back or corner wall type ) , white,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing autometic flushing cistern with brackets , flush pipe , grating and union for discharge pipe ,complete all as specified and as directed.

S&F in repairs CP urinal spreader fixing with 15mm dia pipe

S&F in repairs CP urinal connection pipe 15 mm bore 115mm length

S&F in repairs urinal concealed Flush cock Angle Cock Faucet (Wall Mount Installation Type) Make Jaquar FLR-CHR-5083NK Florentine or equivalent

S&F in repairs urinal Valve Auto Closing System with Built-in Control Cock with Wall Flange alloy screwed for iron pipe 15 mm bore make Jaguar PRS-CHR-077 or equivalent

S&F in repairs Grating Square fittings of size 150 mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT (minimum wight 85 gms)

S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm

Dismantling of cast iron 100 mm bore pipes jointed in cement motar

Dismantling of cast iron 75 mm bore pipes jointed in cement motar

M&L for providing 100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to walls incl necessary stack clamps

M&L for providing 75mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to walls/ floor.incl necessary stack clamps

S&F for 100mm dia CI Junction Double, equal or unequal, ordinary or inverted with spigot or socket branch or with parallel branch provided with acess door complete all as specified and directed.

S&F for 75mm dia CI Junction Double, equal or unequal, ordinary or inverted with spigot or socket branch or with parallel branch provided with acess door complete all as specified and directed.

S&F for providing 100mm dia CI Bends (any radius), diminishing pieces or tapers (larger bore measured)with oval access doors including necessary joints to junctions complete all as specified and directed.

S&F for providing 75mm dia CI Bends (any radius), diminishing pieces or tapers (larger bore measured)with oval access doors including necessary joints to junctions complete all as specified and directed.

S &F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S &F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F PVC (SWR) 110mm bends any radius with access door

S&F PVC (SWR) 75 mm bends any radius with access door

S&F PVC (SWR) 110mm branch piece,double (double Y) equal or unequal

S&F PVC (SWR) 110mm branch piece,double (double Y) equal or unequal

M&L 75 mm dia cast iron Nahani trap, with grating including jointing cement concrete type B-1 (1:2:4) all as specified and directed by Engineer-in-Charge

M&L 75 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified

S&F CI vent cowl 100 mm dia

S&F CI vent cowl 75 mm dia

S&F PVC (SWR) vent cowl 110 mm dia

S&F PVC (SWR) vent cowl 75 mm dia

S&F in repairs unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 40mm bore of pipes incl necessary fittings

M&L for core cutting of upto 150mm dia, n exc 600mm deptth in stone wall /concrete slab and making good disturbed surfaces and filling the remaining area with cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate all as specified and directed.

M&L for core cutting of 52mm dia, n exc 600mm deptth in stone wall and making good disturbed surfaces and filling the remaining area with cement concrete (1:2:4) type B-1 using 20mm graded stone aggregatecomplete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including welding angles, as necessary,bending and gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

S&F 1.25 mm thick Mild steel, plain, black sheet in water tanks , water trough , ducts , covers and similar work, cut to size, holes punched; including round headed screws,clout nails or rivet sand fixed to wood orsteel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required®

M & L for preparation of new steel surface over 10 cm width of girth of any description and applying two coat of synthetic enamel paint over a coat of red oxide all as specified and directed.

Pranjal Associates

Sunil Constructions

PAWAN B SHINDE