Loading
Loading…
Loading…
Tender Value
₹2.0 L
EMD Value
₹2,040
Closing Date
16 Sept 2026, 3:00 pm
EE PWD Kallakurichi
EE PWD Kallakurichi
Special repairs to the Water Supply and Sanitary arrangements and other repair works to Faculty block and Auditorium in Government Medical College and Hospital at Siruvangur in Kallakurichi District
2026_PWD_699136_1
4TN5/26-27/F1/Dated.28.08.2026
Open Tender
Civil Works - Buildings
Lump-sum
Kallakurichi
Please refer tender
7 documents required · 7 mandatory
₹0
₹2,040
31 Aug 2026
31 Aug 2026
16 Sept 2026
1 Sept 2026
16 Sept 2026
1 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repairs and rewinding of 5 HP Submersible motor and bearing pump repairs and removing the motor and the rate inclusive of lifting charges convence charges and rerection charges complete | 3 | Nos | - | - |
| 2 | Servicing and refixing in position of Industrial Model water dispenser unit to deliver portable water etc., complete complying with standard specificatiopns | 4 | Nos | - | - |
| 3 | Supplying and fixing 30mm thick solid core PVC door shutter with PVC frame of size 50x45mm with suitable rebate for housing the shutter (Conforming to IS 4020 with updated amendment) consisting of frame made out of MS tubes 19 gauge thickness and size of 19 x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C' channel of size 30 x 50mm forming styles, and 75x50mm for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2) thick 20mm wide cross PVC sheet as gap insert for top rail, bottom rail. Paneling of 5mm thick PVC sheet bearing on either side and join together other side etc. An additional 5mm thick PVC strip of 20mm width is to be stack and the interior side of the ‘C' channel using PVC sealant adhesive including cost of all furniture fittings such as aluminium aldrop of size 250x16mm - 1No., aluminium tower bolt 250x12mm - 1No. aluminium D type handle 200mm etc. complete, as per direction of Engineer in charge and drawing. | 5.67 | Sq.m | - | - |
| 4Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) | |||||
| 4.01 | 15mm dia brass CP Screw down tap | 20 | Nos | - | - |
| 4.02 | 15mm dia brass CP Piller Tap | 6 | Nos | - | - |
| 4.03 | CP Angle Cock Tap | 4 | Nos | - | - |
| 5Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level) (Internal Water supply) | |||||
| 5.01 | 32mm dia UPVC Pipe | 30 | RM | - | - |
| 6Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.20 MB
Tendercondiions.pdf
Tender Documents • 1.19 MB
BOQ_840452.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].