Construction of SDO (Civil) Complex at Kalayat (Kaithal) CM Announcement Code No.13764 dated 13.08.2016 (Providing 315 KVA Sub Station only).

Amount

Rubber Matting

20.84 Providing and fixing of insulated rubber matting suitable for 11 KV installation 1 M x 2 M x 12 mm thick (IS Code 15652-40091) as per specification complete and as per directions of Engineer - in - Charge

23.22 MCCB, Distribution Boards, MCB's, RCCB's, Change Over etc.

23.22.1 Supply and erection of moulded case circuit breakers single pole / 4 pole on existing wall /pedestal/Panel including bonding to earth and making necessary connections required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work.

23.22.1.3 Triple Pole MCCB 16 Amp. to 100 Amp., 25 KA

23.22.1.5 Triple Pole MCCB 200 Amp. to 250 Amp., 25 KA

23.22.1.12 4 Pole MCCB 300 Amp. to 400 Amp., 50 KA

23.24 MS Stand, Bus Bar Chamber and Panels

23.24.4.4 Load Bank 8 way 400 Amp.

24.1 Earthing and Lightening Arrestor

24.1.3 Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt ) complete as required

24.1.4 Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.

24.1.5 Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode

24.1.9 Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required

24.1.10 Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material

24.2 LT Cable

24.2.7 Supply and Erection of suitable compression type brass cable glands for underground cable: -

24.2.7.4 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core

24.2.7.5 120 Sqmm to 185 Sqmm Cable 3 to 3.5 Core

24.2.7.6 240 Sqmm Cable 3 to 3.5 Core

24.3 HT Cable

24.3.3 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required

24.3.3.1 70 to 120 Sqmm

24.3.4 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required

24.3.4.1 70 to 120 Sqmm

24.5 Miscellaneous Items

24.5.2 S/E of mark double walled corrugated (DWC) HDPE pipe10 Kg./Cm2 laid 0.75 mtr. below ground level including digging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-incharge of the work

24.5.2.4 DWC/HDPE pipe 90/75 mm outer dia / inner dia

24.5.2.6 DWC/HDPE pipe 145/123 mm outer dia / inner dia

M. R. ITEMS

N. S. - 1 Supply, erection, testing and commissioning of outdoor type copper wound, transformer of 315 KVA 11 /0.433 KV, 3 Phase, 50 Hz complete in all respect upto the entire satisfaction of Engineer-in-charge of work (on existing pole / plateform including first filling of oil conforming to IS 1180 Part-II) Make : Alstom, Bharat Bijlee, Kirloskar, Crompton, NGEF and Volt amp.

No. load voltage ratio 11/ 0.433 KV

No. of Phase 3

Frequency cycles 50 Hz

Types: Double wound core type Copper wound.

Cooling ONAN

Duty Outdoor

Vector Group ISS-DYN 11 / IS 2026 /77

Tapping on HV compensation +5% to - 5% Insteps of 2.5%

Temperature rise (Oil / res.00) 500 / 550 C

Attitude upto 1000 m above MSL

Off circuit tape changer

Externally hand operated

Oil conservator with filling hole & cap

Plain oil level gauge with minimum level marking

Thermometer pocket

4 Nos. Plain roller undirectional.

2 Nos. 4" dial type thermometer

Silica Gel breather

Ist filling of oil.

Drain cum filter valve with plug.

Rating & diagram plate.

Two earthing terminals

Lifting arrangement

Explosion vent

Air release plug.

Oil conservator tank

Shunt off valve between buchloz & conservator

TERMINATION

HV-3 Pole single glands cable box suitable for reception of one No. 3 core upto 120 sqmm HT XLPE cable including compound for filling the cable end box with copper lugs / thimble.

LV- 4 Pole 3 glands cable boxes suitable for 3 Nos. 240 sqmm 3.5 core Polyvinyl chloride cable having extended copper bars of requisite Capacity from LT bushing for making connections with cable including cost of copper lugs, thimbles LV: Neutral suitable cable Box for earthing provided.

N. S. - 2 Supply, erection, testing & commissioning of 11 KV indoor H.T. Metering panel complete with CTs, PTs cubical and electronics meter with accuracy class 0.5 as per requirement / approved by HVPN Consisting of the following :

Cubical panel free standing floor mounting type made of sheet steel 14-G SWG CRCA sheet with channel iron base frame spray paintd with strong Synthetic grey channel paint as per size & design approved by HVPN .

3 Nos. 11 KV CTs of rating as approved by HVPN for indoor installation of approved make of HVPN.

One No. 11 KV PT 11000/110 Volts 10 KA burden 0.5 accuracy oil filled suitable for indoor installation of approved make of HVPN.

Digital electronic meter 3 Phase 4 wires 0.5 accuracy for recording reading operating system for difference kind of readings. The cubical panel will be complete in all respect including interconnection, internal wiring with PVC copper cable its testing / approval of all times by HVPN including cost of all testing / approval charges of all items by HVPN with a guarantee of one year from the date of commissioning including cost of all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.

N. S. - 3 Supply, erection, testing & commissioning of cubical type dust & vermin proof LT automatic power factor control panel 95 KVAR capacity suitable for automatic operation and control power factor within the set limit free standing floor mounting made out of 14 G mild steel sheet with channel iron base frame painted with stoving synthetic light grey enameled paint suitable for operation on 3 phae 4 wire 50 cycles, per second 400 / 440 volts AC supply equipped with the following (as per diagram attached) 1 No. automatic power factor control relay of GE / L&T make space for incomer 200 amp triple pole MCCB.

A set of pilot lamp (3 Nos.) phase indicating lamp of L&T make iron clad bus bar chamber suitable for 200 Amp. 440 V having 3 Nos. phase copper bars of cross-section 25 mm x 05 mm and 1 No. neutral copper bars of cross-section 20 mm x 5 mm duly tinned and insulated with polyvinyl chloride sleeving with requisite clearance as per ISS connection from incomer 200 amp. 4 pole MCCB to bus bar by means of solid copper strips of requisite capacity duly tinned & insulated with PVC sleeving.

1 No. 3 Phase 25 KVAR capacitor of Alstham / Siemaens / GE make (Total 25 KVAR).

2 Nos. 3 Phase 15 KVAR capacitor of Alstham / Siemaens / GE make (Total 30 KVAR).

5 Nos. 3 Phase 5/10 KVAR capacitor of Alstham / Siemaens / GE make (Total 35 KVAR). (3+2)

1 No. 3 Phase 63 Amp. Contactors for 25 KVAR capacitor of L.T. make.

5 Nos. 3 Phase 45 Amp. Contactors for 5/10 KVAR capacitor of L.T. make.

3 Nos. 40 Amp. MCB for 25/15 KVAR capacitor of L.&T / GE make.

5 Nos. 20 Amp. MCB for 10/5 KVAR capacitor of L.&T / GE make.

8 Nos. indicator lamp 220 volts for an indicator of respective capacitor bank of L&T / Siemens make.

8 Nos. MCB for each capacitor of L&T / GE make.

CTs of ratio 200 / 5 amp of AE make.

16 Nos. push button on / off for manual operating of required of L&T make connection from bus bar to capacitor by means of 16 sqmm PVC copper cable, earthing copper bus bar of cross-section 20 mm x 5 mm duly tinned throughout the length of panel.

N. S. - 4 Supply and erection of Fire extinguisher ISI mark (Ajay make) Co2 type of 4.5 Kg. capacity as per IS 7285 duly erected / hung on wall with hooks with all labour & petty material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.

N. S. - 5 Supply & erection of MS bucket stand which include cost of 6 Nos. fire bucket with 9 liter capacity with stand filling including cost of welding & painting of complete stand & buckets with one coat of red oxide and two coats of approved paint of red colour written with fire on the buckets as per fire protection with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.

N. S. - 6 S/E of 11 KV gang operated switch 'Jayshree make' conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing 'H' pole with the help of 3 Nos. channels of size 75 mm x 40 mm x 6 mm, 1.8 M. long fixed with suitable size of MS clamp, nuts & bolts including cost of 6 Nos. 11 KV insulator with GI Pin, RD fuses and painting with 2 coats of approved paint and one coat of red oxide material required to complete the job in all respect utpo the entire satisfaction of Engineer-in-charge of work.

N. S. - 7 Supply & erection of lightening Arrestor Model SDU ALPRO make suitable for 11 KV 3 Phase 50 Hz grounded neutral system comprising of Speek gap type ( Quench gap type ) in series with non liner resister element housesed in horizontally Scale porcelain bushing with line and ground terminal along with mounting clamps Conforming to ISS 3070 (Part-1) of 1985 with latest amendment with all labour and material required to complete the job in all respect utpo the entire satisfaction of Engineer-in-charge of work.

N. S. - 8 Providing and fixing of stay set complete with stay wire with dis insulator as per specification upto the entire satisfaction of Engineer-in-charge of work.

N. S. - 9 Providing and fixing of wire mesh jali around the transformer of size 4'x 8' made out of 75 x 25 x 3.25 mm jali fixed with angle iron frame made out of M.S. angle 50 x 50 x 6 mm support of M.S. flat 50 x 6 mm and fixed in C.C. Block 1:2:4 including cutting, welding etc. as per drawing complete in all respect upto the entire satisfaction of the Engineer-in-Charge.

N. S. - 10 Erection of MS Angle 50 x 50 x 6 mm, M.S. flat & nuts & bolts including cutting, bending to the required shape drilling holding carriage, painting loading & unloading complete in all respect.

N. S. - 11 Supply and Erection of underground cable loose in existing pipe or trenches complete in all respect upto the entire satisfation of Engineer-in-Charge of the work.

i) 95 Sqmm 3.5 Core Cable (Armd.)

ii) 120 Sqmm 3.5 Core Cable (Armd.)

iii) 240 Sqmm 3.5 Core Cable (Armd.)

N. S. - 12 Supply and Erection of XLPE € 11 KV HT alluminium armoured cable ISI marked in existing pipe / trenches / surface with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

i) 70 Sqmm 3 Core XLPE Cable

N. S. - 13 Supply and Erection of PCC 9 Mtr. Pole complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

i) PCC 9 Mtr. Pole

PS ELECTRIC