Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.3 LAccepted-Finance | ₹2.3 L | 1 | Accepted-Finance Accepted |
| 2 | 2₹2.4 LAccepted-Finance | ₹2.4 L | 2 | Accepted-Finance Accepted |
| Sl No | Description | Qty | Unit | D.MURUGAN L2 | O.THAVAMANI L1 |
|---|---|---|---|---|---|
| 1.00Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. | |||||
| 1.01 | All kinds of soil | 18 | Cum | 190 ₹3,420 | 180 ₹3,240 |
| 2.00 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | 160 | Sqm | 12 ₹1,920 | 11 ₹1,760 |
| 3.00Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||||
| 3.01 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 12.5 | Cum | 8,200 ₹1.0 L | 8,000 ₹1 L |
| 3.02 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) | 2.54 | Cum | 7,000 ₹17,780 | 6,700 ₹17,018 |
| 4.00 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete | 400 | Kg | 140 ₹56,000 | 125 ₹50,000 |
| 5.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 23 | Sqm | 800 ₹18,400 | 750 ₹17,250 |
| 6.0012 mm cement plaster finished with a floating coat of neat cement of mix : | |||||
| 6.01 | 1:3 (1 cement: 3 fine sand) | 26 | Sqm | 480 ₹12,480 | 450 ₹11,700 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹4,410
Closing Date
27 Apr 2026, 6:00 pmClosed
Executive Engineer (C), BSNL Civil Division,Madura
Executive Engineer(C), Civil Division,Level IV Building, CTO Compound,Tallakulam, Madurai.
Providing BTS cum EA bed, providing fencing to NBSNL tower site at Allampatti, Virudhunagar.
2026_BSNL_274902_1
NIT No 02/BSNL/CDMA/2026-27
Open Tender
Civil Works
30 days
MADURAI
Please refer tender document
3 documents required · 3 mandatory
₹590
AO (Cash) O/o PGM, BSNL Madurai
₹4,410
29 Apr 2026
16 Apr 2026
29 Apr 2026
16 Apr 2026
27 Apr 2026
16 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. | |||||
| 1.01 | All kinds of soil | - | Cum | - | - |
| 2Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | |||||
| 3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||||
| 3.01 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | Cum | - | - |
| 3.02 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) | - | Cum | - | - |
| 4Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete | |||||
| 5Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | |||||
| 612 mm cement plaster finished with a floating coat of neat cement of mix : | |||||
| 6.01 | 1:3 (1 cement: 3 fine sand) | - | Sqm | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.08 MB
Tendernotice_2.pdf
PDF • 1.73 MB
BOQ_321115.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid