REPAIR AND POLISHING OF WOODEN FURNITURE (FD MAP TP) OF OMQS SMQS SINGLE ACCN AT 7 AIR FORCE HOSPITAL KANPUR

Amount

Chair dinning ( FD 279 , FD 270, FD 262 ) :- Replacement of the following old damaged/ decauyed parts of chair dining with new parts made of Ist class new (teak )seasoned wood complet all as specified and shown on drg.

(a) Rear leg

(b) Front leg

(c) Rear/front/side rail

(d) Stiffener

(e) Back rest

(f) Tightening of all parts/joints of whole chair dining .

Chair Easy FD-1108/229 : S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.

(a) Rear leg

(b) Front leg

(c) Arms

(d) Front/back/Side rail of seat as to match with the existing, all as specified and directed

(e) Tightening of all parts/joints of whole chair easy.

Bed hard MAP-

(a)S&F in replacement of plywood BWR Gde of size 1980 x 900mm of with necessary steel screw to top of Bed Hard MAP and all as shown on drg.

(b) S&F in replacement of Head board of Bed Hard MAP made of 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround as per shown on drg.

(c ) All as per Item No.3 (b) above but foot board.

(d) M&L for painting to frame of Bed Hard MAP with synthetic enamel black paint including preparation of surface with rubbing with emery paper to MS pipe. and provide 04 Nos PVC shoes to legs as specified and directed.

TABLE BED SIDE ( FD 276) :- Taking out old unsevicable components of table bed side as and where required from table bed side and S&F new components of existing shape and size all as specified on drawing and directed with following components.

(a) New sides made of 18mm thick veneered teak face pre-laminated MDF board exterior grade.

(b) New top made out of 18mm thick veeneared teak face pre-laminated MDF board exterior grade with 1.5mm thick plastic laminated sheet on top of Make- Novapan/Archid /Kitply

(c) New bottom made out of 18mm thick veneered teak wood pre-laminated MDF board, exterior grade.

(d) New shelves made out of 12mm thick veneered teak face Pre-laminated MDF board, exterior grade.

(e) New back ply 6mm thick plywood, BWR grade, commercial.

Table Dressing Ladies with mirror FD-251

(a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable one all as specified and as directed.

(b) Drawer made of 12mm thick commercial plywood and front side made of 18 mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround and provision of knob including dismantling unserviceable one all as specified and as directed.

(c) S &F new complete leg base as per drg including dismantling unserviceable one all as specified and as directed

(d) S &F new box with twin aluminium channel fitted with glass shutter (02 nos) complete made of 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround as per drg including dismantling unserviceable one all as specified and as directed

Table Dressing Gents with mirror FD-230

(a) S/F new Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable one all as specified and as directed.

(b) S & F new box made up of 18 mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround dismantling unserviceable one all as specified in drg and as directed.

(c) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround and provision of knob including dismantling unserviceable one all as specified and as directed.

Table centre FD-274 & 235 : S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) Stiffener

(e) Top 12m thick of glass top including dismantling unserviceable one all as specified size and as directed.

Table 900 x 600 mm with/ without drawer FD- 223 & 224 : S&F new components of 1st class HW (Teak/shisham) including dismantling unservicable one all as specified and as directed.

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) Top 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround including dismantling unserviceable one all as specified and as directed.

(e) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick ply with 1mm thick laminated sheet including provision of knob completed all as specified and directed.

Table Peg FD- 277 & 236/384 : S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) Stiffener

(e) Top 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround including dismantling unserviceable one all as specified and as directed.

Table Writing (FD 249 ) :-

(a) Taking out old U/S top of table writing and S&F new top of 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround all round the top complete all as shown in drg and directed by Engr-in-Charge.

(b) Stiffener made of seasoned teak wood as per drawing and directed by Engr-in-charge

(c) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick ply with 1mm thick laminated sheet including provision of knob completed all as specified and directed.

(d) Complete cupboard including drawer from the table writing and made of 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) including back provided with 12mm thick commercial plywood including dismantling unserviceable one all as specified and as directed.

Teapoy FD-382/ 232 & 278 : S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) Top 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround including dismantling unserviceable one all as specified and as directed.

Table dining for 08/06 persons FD-30(M)/ 273 & 239 : S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.

(b) Top rail (long/front) of 6 prsn

(c) Top rail (long/front) of 8 prsn

(d) Top rail (short/side)

(e) wooden bracket size 100x100mm (corner)

(f) Top of 6 prsn 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround including dismantling unserviceable one all as specified and as directed.

(g)All as per item No 12(f) here in before but 8 pers

Form without back (FD-77(M) & FD-1027)

(a)Supply and fixing in replacement of seat plank of form without back of size 25mm thick of 1st class hard wood teak duly wrought both side painted including nuts, bolts & rubber shoes all as specified and shown on drg. (FD-77(M) & FD-1027) and directed.

(b)Supply and fixing in replacement of unserviceable portions of form with or without back with 25mm square conduit pipe of wall thickness 1.6mm duly electric welding complete all as directed by Engr-in-Charge. (FD-77(M), FD-78(M) &FD-1027)

(c ) M & L for spray painting to frame of form without back except seat planks with synthetic enamel paint of approved colour all as specified and as directed by Engr-in-Charge. (FD-77(M) & FD-1027).

Table Bed side MAP

(a) S & F in replacement of upper side drawers with new drawers made of 18mm thick MR Gde Plywood with 1.0mm thick laminated sheet on front side, 12mm thick of sides of drawer including with 6mm thick MR Gde Plywood to bottom of drawers including 100mm CP handle and all as shown on drg.

(b) All as per Item No.14 (a) above butlower side drawer

(c ) Supply and fixing in replacement of back of table bed side made of 9mm thick plywood MR Gde all as specified and shown on drg.

(d) S & F New top with upper head rest(size 82mmx 414mm) made out of 18mm thick MR Gde plywood pasted with 1mm thick sunmica on one side of approved shade duly providing 4mm thick teak wood beading all round including dismantling unserviceable one all as specified and as directed.

(e) All as per Item No.14(a) above but sides.

(f) S & F Telescopic channel (pair) for drawer of Table bed side all as specified and as directed.

(g) S & F 100mm CP handle for Table bed side.

Chair visitor /auditorium chair Trade Pattern

(a) Chair of different Make and Model (Seat ) re-upholstering with new tapestry/ (approved quality) including dismantling of old one complete all as specified and dircted.

(b) Chair of different Make and Model (Back) re-upholstering with new tapestry/ (approved quality) including dismantling of old one complete all as specified and dircted.

Sofa set single seated / 4 seated

(a) Taking out old U/s Broken front leg from Sofa set and S & F New leg to be made of seasoned teak wood same shape and size as specified and directed by Engr –in-Charge.

(b) All as per Item No.16 (a) above but rear leg

(c) All as per Item No.16 (a) above but Arms

(d) All as per Item No. 16 (a) above but Batten

(e) Providing new M & L cushion of 40 density cool foam of size 560 x 530x100mm thick duly upholstered with new tapestry cloth as approved (rate not less than Rs 350 /Mtr) complete all as specified and as directed.

(f) Providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality (as per sample held with office) with zip mechanism duly stitched as directed for easy removing/closing purposes etc to cover the foam of size 560 x 530x100mm thick complete all specified and as directed. Cost of tapestry cloth shall not be less than Rs 350/ RM.

Chair all type- Recanning of chairs CBA/CBB wooden and chair bin soiled linen, chair Easy, Chair dinning, Chair writing etc with 2mm wide new plastic cane and 0.4mm thick cream/white half round seat and back and border to be covered with 3 to 4 mm wide ½ round cane complete all as specified and shown in drawing.

Polishing :- M&L for preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & filling the cracks with putty making the surface smooth and apply two coat high class french polish to give glossy finish as directed by GE/Eng-in -Charge of following wooden furniture at various location in 7AFH stn.

(a) chair dining

(b) Chair Easy

(c ) Table bed side

(d) Table dressing ladies

(e ) Table dresing Gents

(f) Table Centre

(g) Table 900 x 600 mm with/ without drawer

(h) Table Peg

(j)Table writing

(k) Teapoy

(l) Table dining 6/8 pers

(m) sofa set

GUJRAL BUILDERS (BID ID -3469326)

ANAND FURNITURE (BID ID -3471014)

SHRI SHAYAM KRIPA (BID ID -3465750)

kailash brothers (BID ID -3465944)

Avinash Enterprises (BID ID -3465808)