COMPREHENSIVE MAINT OF FAFA ACCN IN ZONE-II UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT

Amount

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and removing to store complete all as specified and directed.

S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, hold fast, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match. Complete all as specified and directed.

S&F MS hold fast similar small articles confirming to Fe 290 Gde -E- 165 complete all as specified and directed.

S&F 40mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats complete all as specified and directed.

S&F aluminium wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with alu.wire staples complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F in repair overall length of cover plate 150mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F 100mm butt hinges, medium weight cold rold mild steel. Complete all as specified and directed.

Taking down chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F 2nd class hardwood 30mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of windows, ventilators, etc. are provided with stiles & rails as specified in SSR Part I, Section 8 clause 8.20 (b); to chowkats

S&F 50 mm butt hinges, medium weight cold rold mild steel complete all as specified and directed.

S&F Aluminium handles 75mm size, cast type, anodised complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 75mm long of extruded section complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

Taking up or down 15mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 15 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall complete all as specified and directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 20 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves ISI marked, 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repairs CP Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed.

S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type), complete all as specified and directed.

S&F in repairs flexible jet shower, 25mm dia including CP flexible pipe 1.20m long heavy duty and hook incl all necessary fittings complete all as specified and directed.

S&F in repair two -in- one tap cast copper alloy chromium plated fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repar Brass CP wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe. complete all as specified and directed.

S & F in repair wash hand basin brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed. complete all as specified and directed.

S&F in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated brass screws. Complete all as specified and as directed.

S&F in repair soap dish, chromium plated, fixed to plugs with chromium plated brass screws. Complete all as specfied and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 125mm size brass chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Cast iron floor trap 75mm dia, with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repair Cast iron Nahani trap 100mm dia, with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

M&L for vetrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles nexc 0.36 sqm in floors set and joined in neat cement slurry and pointed in white or .coloured cement to match and incl 15mm thick CM 1:6 screed bed or bedding layer of mortar for laying floor finishes incl dismantling of old unserviceable floor tiles. Complete all as specified and directed.

M&L for vetrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles nexc 0.36 sqm in skirting/dado set and joined in neat cement slurry and pointed in white or .coloured cement to match and incl 10mm thick rendering in CM 1:4 including dismantling of old unserviceable wall tiles. Complete all as specified and directed.

SS&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) incl dismantling of old unserviceable tiles complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface incl dismanting of tiles complete all as specified and directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type), complete all as specified and directed.

S&F in repair shed drapery rod powder coated 20 mm internal dia with bracket incl decorative brass end knob etc and fixed on wall. Complete all as specified and directed

S&F in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repairs 32mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S & F in repairs stainless steel kitchen plate rack of thickness nexc 1 mm thick (18 gauge) and size nexc 1.00sqm. complete all as specified and directed.

S&F in repairs aluminium wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with alu.wire staples complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick Work or concrete curface and finished fair & even in CM 1:6 complete all as specified and as directed.

M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces as on ceiling complete all as specified and as directed.

M & L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M & L for preparation of new distempered surfaces of walls and applying two finishing coat of oil bound distemper (oil emulsion) on walls, incl 3mm thick wall care putty complete all as specified and directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

M&L 18-20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:6) complete all as specified and directed.

M&L machine cut kota stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms including rubbing and polishing complete over 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

S&F in repair 20mm dia CP towel rail 600mm long incl all fittings complete all as specified and as directed.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty/wooden beadding in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from wooden frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty/wooden beadding in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F Sheet glass 3.0mm thick, frosted glass & glazing with oil putty/wooden beadding in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F Sheet glass 3.0mm thick, frosted glass & glazing with oil putty/wooden beadding in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal/wooden frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails and M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side deocrative choice lamination fixed with screws to timber frame work as in kitchen cabinet, almirah & shelves incl butt hinges, hasp & staple alumninim handles, alu tower bolt, knob and wooden bedding (surrounding of particle board) as per site requirement and complete all as specified and directed.

S&F in repair auto hinges for cabinet case complete all as specified and directed.

S&F in repair stainless steel plain basket of size 17"x20"x6" complete all as specified and directed.

S&F in repair stainless steel partion of size 17"x20"x6" complete all as specified and directed.

S&F in repair stainless steel cutlery of size 17"x20"x6" complete all as specified and directed.

S&F in repair stainless steel grain trolly with stand of size 21"x17"x10" complete all as specified and directed.

S&F in repair stainless steel plate basket of size 17"x20"x6" complete all as specified and directed.

S&F in repair 20" long telescopic sider to facilitate drawer slide on steel ball bearing fixed with steel screws. Complete all as specified and as directed.

S&F in repair 150mm size stainless steel bright finish handle for cabinet shutter complete all as specified and directed.

Taking down PVC/CI pipes any type and size incl all fittings complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110mm dia complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and directed.

S&F in repair Stack clamps out of 25mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified and directed.

S&F in repair Stack clamps out of 25mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed.

Disconnecting existing tanks of capacity exceeding 250 ltr and not exceeding 500 ltrs. setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position and incl Cleaning and removing all scale and dirt etc: from the tanks and from mouth of circulating pipes etc complete and finally washing the tanks with clean water and bringing the tank to a position for storing clean water and bringing the tank to a position for storing the clean water. Complete all as specified and as directed Note: (i) The tank is to be cleaned through Alum and bleaching powder solution. (ii) The wire brush is to be used for cleaning of water tank.

Disconnecting existing tanks, of capacity exceeding 500 ltr and not exceeding 1000 ltr setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position and incl Cleaning and removing all scale and dirt etc: from the tanks and from mouth of circulating pipes etc complete and finally washing the tanks with clean water and bringing the tank to a position for storing clean water. Complete all as specified and as directed. Note: (i) The tank is to be cleaned through Alum and bleaching powder solution. (ii) The wire brush is to be used for cleaning of water tank.

Dismantling of old water tank of capacity exceeding 250 ltr but not exceeding 500 ltr and S&F 500 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed.Complete all as specified and directed.

Dismantling of tank of capacity exceeding 500 ltr and not exceeding 1000 ltr and S&F 1000 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed.Complete all as specified and directed.

S & F in repair PVC covers of PVC/ HDPE water tank suitable for 500 & 1000 ltrs capacity including all necessary locking arrangement complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar, facings, dressed stone work and precast concrete incl M&L brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean raidus built in CM 1:6. Complete all as specified and directed.

Supply & fix in repair glass self assembly made of 5 to 6 mm thick sheet glass of size 600 x 120mm fixed with CP brackets complete all as specified and directed.

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

S&F in repair CP greating 75mm dia. Complete all as specified and directed.

S&F in repair CP greating 100mm dia. Complete all as specified and directed.

S & F in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (minimum weight -210 gms) complete all as specified and directed.

M & L for preparation of old plastered surfaces or previously untreated surfaces of ceiling and applying applying 2mm thick wall care putty and two coat finishing of oil bound disteper. complete all as specified and directed.

M & L for preparation of old plastered surfaces on wall applying 2mm thick wall care putty and two coat finishing of oil bound distemper complete all as specified and directed.

M&L for treatment on old plasterd external surface on wall applying 2mm thick wall care putty and over two coat of exterior grade weather proof acrylic emulsion paint (apex ultima). Complete all as specified and directed.

M&L rubber moulded coloured Chequered tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed in CM 1:6 and dismantling of old unserviceable chequered tiles complete all as specified and directed.

M&L 18MM thick WPC board both side plain white/ colour fixed anti corrosive fire resistant with screws, solvent cement/adhesive to make kitchen cabinet including dismantling the boarding. Complete all as specifie and dirtected.

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L75mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound type A complete all as specified and directed.

Taking down old existing water proofing treament from the top of RCC/arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises. Complete all as specified and directed.

M&L 20mm thick screed bed in cement mortar 1:4 as on roof surface, mixing with water proofing compound @ 200ml per 50 Kg of cement consumed or as per manufacterers instruction. Complete all as specified and dirtected. Note:- water proofing compound shall be measured & paid separately).

Supply only integral water proofing compound complete all as specified and directed.

M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30 kg/sqm followed evenly by a tack coat @ 1.20kg/sqm using 85/25 grade industrial hot blown bitumen, over it laid with APP modified polymeric water proofing membrane weight 3.6 kg/sqm reinforced with non-woven polyster fabric (weight not less than 160 gm/sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufcturers instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20kg/sqm and finally finished the top of polymeric water proofing membrane with a coat of bitumen aluminium paint @ 0.20kg/sqm as per manufacturers instructions. Complete all as specified and directed.

Punit Jain

AMBEY CONSTRUCTION

jitendra AND Co

M/S AMAR ELEKTRO CENTRE

VIRAT CONSTRUCTIONS

Shikha Enterprises

Jay Ambay Enterprises

SA construction co.