REPAIR / MAINT OF SPH, NON CLOGGING SEWAGE PUMP/ MOTOR TREATED WATER SUPPLY AND CONNECTED WORK AT NEW CANTT PRAYAGRAJ INCLUDING NEW STP UNDER GE WEST PRAYAGRAJ

Amount

Taking out by lifting of non clog sewage submersible pump including electric motor 3 to 5 HP, 3 phase , 415 Volts by disconnecting all electrical & mechanical connection, dismantling the motor, cutting the burnt winding and cleaning the slots with non greasy materials and rewinding with PVC insulated copper wire (Gauge of copper is to match the existing size) with insulating material, varnishing drying complete. Reassembling the motor complete , lowering , installing and making all electrical & mechanical connection and testing complete to entire satisfaction of Engr-in-charge.

Taking out lifting of non clog sewage submersible pump incl. electric motor 7.5 to 10 HP ,3 phase ,415 Volts by ,disconnecting all electrical & mechanical connection, dismantling the motor .Cutting the burnt winding and cleaning the slots with non greasy materials and rewinding with PVC insulated copper wire (Gauge of copper is to match the existing size) with insulating material, varnishing drying complete. Reassembling the motor, all as directed ,lowering , installing and making all electrical & mechanical connection, testing complete to entire satisfaction of Engr-in-charge.

Taking out lifting of non clog sewage submersible pump incl. electric motor upto 12.5 HP ,3 phase ,415 Volts by ,disconnecting all electrical & mechanical connection, dismantling the motor .Cutting the burnt winding and cleaning the slots with non greasy materials and rewinding with PVC insulated copper wire (Gauge of copper is to match the existing size) with insulating material, varnishing drying complete. Reassembling the motor, all as directed ,lowering , installing and making all electrical & mechanical connection, testing complete to entire satisfaction of Engr-in-charge.

Taking out/ dismantling non clog sewage pump unit 3 - 5 HP capacity and overhauling, oiling & greasing including replacement of warn out nut bolt & washer, grinding & polishing if required complete. Note: Spares impeller, bush, & oil seal will be measured and paid separately under respective items.

Taking out/ dismantling non clog sewage pump unit 7.5 - 10 HP capacity and overhauling, oiling & greasing including replacement of warn out nut bolt & washer , grinding & polishing if required complete. Note: Spares impeller, bush, & oil seal will be measured and paid separately under respective items.

Taking out/ dismantling non clog sewage pump unit upto 12.5 HP capacity and overhauling, oiling & greasing including replacement of warn out nut bolt & washer , grinding & polishing if required complete. Note: Spares impeller, bush, & oil seal will be measured and paid separately under respective items.

Supply only non clogging heavy duty impeller for 3 to 5 HP

Supply only Non clogging heavy duty impeller for 7.5 to 10 HP

Supply only Non clogging heavy duty impeller for upto 12.5 HP

Supply only bush for 3 to 7.5 HP capacity

Supply only bush for 7.5 HP to 12.5 HP capacity

Supply only oil seal for 3 to 7.5 HP capacity

Supply only oil seal for 7.5 HP to 12.5 HP capacity

Taking out centrifugal pump including electric motor 3 to 7.5 HP ,3 phase , 415 Volts after, disconnecting the electric connection. Dismantling the motor & cutting the burnt winding and cleaning the slots with non greasy materials and rewinding with super enameled copper wire (Gauge of copper is to match the existing size) with insulating material, varnishing complete. Reassembling the motor, repair and overhauling of pumps, replacement of bearing, grinding , polishing of impeller, neckring , greasing complete all as specified & directed and making electric connection and testing complete to entire satisfaction of Engr-in-charge

Taking out air compressor including electric motor upto 30 HP 3 Phase 415 V installed at STP disconnecting electric connection and dismantling motor, cutting burnt winding and cleaning slots with non greasy chemical and rewinding with super enameled copper wire of existing gauge incl. insulating material, varnishing complete and repair of compressor by dismantling, grinding, polishing of cylinders, pistons, replacement of piston rings, bearings including replacement of compressor oil 5 Ltr, complete all as specified & directed by Enginer- in- charge

Excavation in trenches in any type of soil not exc 1.5 mtr wide and not exc 1.5 m deep and getting out including forming of bottom surface to required level or slope for laying of CI/GI pipe complete all as specified and directed.

Returning filling with earth obtained from excavation including spreading leveling and well ramming in layers n. exc 25 cm thick complete all as specified and directed.

Removal of surplus excavated soil to a distance not exc 50 mtr and depositing where directed at level not exc 1.5 mtr above starting point complete all as specified and directed.

M&L for cutting of road metal surface for passing of pipe lines and making good the road surface with 150 mm thick layer of compacted stone aggregate and existing thickness bituminous macadam or PCC 1:2:4 type B-1 using 20 mm graded stone aggregate completed all as specified & directed. Note:- (i) Excavation & earthwork shall be measured & paid separately under respective item. (ii) Proper compaction shall be done to avoid any settlement.

M&L in replacement of cast iron sluice valve 80 mm dia heavy duty both end flanged, class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts & bolts, washers including 3 mm thick rubber gasket joint complete all as specified and directed.

M&L in replacement of cast iron sluice valve 100 mm dia heavy duty both end flanged, class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts & bolts, washers including 3 mm thick rubber gasket joint complete all as specified and directed.

M&L in replacement of cast iron sluice valve 150 mm dia heavy duty both end flanged, class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts & bolts, washers including 3 mm thick rubber gasket joint complete all as specified and directed.

M&L in replacement of cast iron sluice valve 250 mm dia heavy duty both end flanged, class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts & bolts, washers including 3 mm thick rubber gasket joint complete all as specified and directed.

Taking out 100 mm bore sluice valve for repair, refacing, regrinding, repacking stuffing box of sluice valve spindle including taking apart and reassembling including replacement of gland packing, nut, bolts etc and refixing the same complete all as specified and directed.

Taking out 150 mm bore sluice valve for repair, refacing, regrinding, repacking stuffing box of sluice valve spindle including taking apart and reassembling including replacement of gland packing, nut, bolts etc and refixing the same complete all as specified and directed.

Taking out 200 mm bore sluice valve for repair, refacing, regrinding, repacking stuffing box of sluice valve spindle including taking apart and reassembling including replacement of gland packing, nut, bolts etc and refixing the same complete all as specified and directed.

Taking up or down old rusted / worn out 15 mm bore GI steel water tubing and connections including cleaning complete all as specified and as directed

Taking up or down old rusted / worn out 20 mm bore GI steel water tubing and connections including cleaning complete all as specified and as directed

Taking up or down old rusted / worn out 25 mm bore GI steel water tubing and connections including cleaning complete all as specified and as directed

Taking up or down old rusted / worn out 40 mm bore GI steel water tubing and connections including cleaning complete all as specified and as directed

Taking up or down old rusted / worn out 50 mm bore GI steel water tubing and connections including cleaning complete all as specified and as directed

Taking up or down old rusted / worn out 80 mm bore GI steel water tubing and connections including cleaning complete all as specified and as directed

Refixing old 15 mm bore GI steel tubing and connections with neww fittings like elbow, socket, bend, Tee etc in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

Refixing old 20 mm bore GI steel tubing and connections with neww fittings like elbow, socket, bend, Tee etc in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

Refixing old 25 mm bore GI steel tubing and connections with neww fittings like elbow, socket, bend, Tee etc in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

Refixing old 40 mm bore GI steel tubing and connections with neww fittings like elbow, socket, bend, Tee etc in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

Refixing old 50 mm bore GI steel tubing and connections with neww fittings like elbow, socket, bend, Tee etc in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

Refixing old 80 mm bore GI steel tubing and connections with neww fittings like elbow, socket, bend, Tee etc in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

S&F 15 mm bore GI steel tubing "medium grade" with all fittings laid in trenches or fixed to wall, floor and ceiling etc complete all as specified.

S&F 20 mm bore GI steel tubing "medium grade" with all fittings laid in trenches or fixed to wall, floor and ceiling etc complete all as specified.

S&F 25 mm bore GI steel tubing "medium grade" with all fittings laid in trenches or fixed to wall, floor and ceiling etc complete all as specified.

S&F 40 mm bore GI steel tubing "medium grade" with all fittings laid in trenches or fixed to wall, floor and ceiling etc complete all as specified.

S&F 50 mm bore GI steel tubing "medium grade" with all fittings laid in trenches or fixed to wall, floor and ceiling etc complete all as specified.

S&F 80 mm bore GI steel tubing "medium grade" with all fittings laid in trenches or fixed to wall, floor and ceiling etc complete all as specified.

S&F in repair 15 mm bore dia stop valve cast copper alloy screwed down weight not less than 400 gms , high pressure with crutch or butter fly handle ,screwed both ends for pipe or for unions and fixed complete all as specified and directed.

S&F in repair 20 mm bore dia stop valve cast copper alloy screwed down weight not less than 500 gms , high pressure with crutch or butter fly handle ,screwed both ends for pipe or for unions and fixed complete all as specified and directed.

S&F in repair 25 mm bore dia stop valve cast copper alloy screwed down weight not less than 600 gms , high pressure with crutch or butter fly handle ,screwed both ends for pipe or for unions and fixed complete all as specified and directed.

S&F in replacement 40 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in replacement 50 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Cutting of cast iron pipes of 100 mm bore in position for insertion of new tees, branches, etc and reducing to required length of pipe complete all as specified and directed.

Cutting of cast iron pipes of 150 mm bore in position for insertion of new tees, branches, etc and reducing to required length of pipe complete all as specified and directed.

M&L for drilling & taping cast iron water mains (in position) for branch connection of 20 mm bore CI / GI pipe including & provision of suitable size MS clamp with nuts, bolts and washer and welded one with GI socket complete all as specified and directed.

S & F GI union 20 mm dia

S & F GI union 25 mm dia

S & F GI union 40 mm dia

S & F GI union 50 mm dia

S & F GI long screw with socket or check nut 20 mm dia

S & F GI long screw with socket or check nut 25 mm dia

S & F GI long screw with socket or check nut 40 mm dia

S & F GI socket 20 mm dia

S & F GI socket 25 mm dia

S & F GI socket 40 mm dia

S & F GI socket 50 mm dia

S & F GI elbow 20 mm dia

S & F GI elbow 25 mm dia

S & F GI elbow 40 mm dia

S & F GI elbow 50 mm dia

S & F GI CI gate valve 20/25 mm dia

S & F GI reducer 20x25 mm dia

S & F GI reducer 40x25 mm dia

S & F GI reducer 80x65 mm dia

S & F GI flange 80 mm dia with nut bolts

S & F GI Nipple 80 mm dia

S & F rubber gland

S&F in replacement of 6 mm thick MS plate chequered plate including welding/grinding to make in shape complete all as specified and directed

S&F in replacement of 6 mm thick angle/Flat iron/MS Bar including welding/grinding to make in shape complete all as specified and directed

Supply, laying, connecting and testing of LT cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volt grade with stranded aluminium conductor cable of size 95 sqmm 3.5 core in replacement complete all as specified and directed.

Supply, laying, connecting and testing of LT cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volt grade with stranded aluminium conductor cable of size 50 sqmm 3.5 core in replacement complete all as specified and directed.

Repair and maint of LT panel/ star delta panel at water supply installation including provision of necessary PVC insulated copper wire, lugs, bushes, insulating material including necessary re-wiring with suitable size copper conductor complete all as specified and directed. NOTE: Spare parts of shall be measured and paid separately under respective item of schedule.

Supply only 4 pole power contactor Type-ML of rating 63/70 Amp for star delta stator/ LT panel complete all as specified and directed.

Supply only 3 pole power contactor Type-ML of rating 45/50 Amp for star delta stator/ LT panel complete all as specified and directed.

Supply only 2 pole power contactor Type-ML of rating 32 Amp for star delta stator/ LT panel complete all as specified and directed.

Supply only indicator LED type R, Y, B complete all as specified and directed.

Supply and fixing in replacement of MCCB, 3 pole, 415 volts, 50 Hz, rated current 100 Amp, breaking capacity 25 KA, with thermal and magnetic release complete all as specified and directed.

Supply and fixing in replacement of MCCB, 3 pole, 415 volts, 50 Hz, rated current 200 Amp, breaking capacity 35 KA, with thermal and magnetic release complete all as specified and directed.

Repair, overhauling and testing of existing starter panel board of any size and type including cleaning with compressed air, tightening of all electric connections to switches including replacement of MCB and switch fuse disconnect or units each of any rating, opening and refixing of doors with proper locking arrangement, replacement of wornout lugs, nuts, bolts, internal wiring with suitable size minimum 1.5 sqmm of PVC copper conductor wire and connection to main earth lead and spray painting with synthetic enamel paint of light grey shade in outer/ inner side of panel after cleaning and preparing surface including sign writing complete all as specified and directed. NOTE: Spare parts of shall be measured and paid separately under respective item of schedule.

S & F 16 Sqmm 3 core submersible copper cable PVC insulated PVC sheathed complete all as specified & directed.

S & F 10 Sqmm 3 core submersible copper cable PVC insulated PVC sheathed complete all as specified & directed.

M&L in replacement of Non clog submersible pump starter three phase 415 volts suitable for 7.5 HP motor including connection and fixing complete all as specified and directed. Make: Havells/ Indoasian/ Crompton

M&L for earthing complete with galvanized steel earth plate 60cmx60cmx6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth lead GI 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover and frame all as shown in electric plate of SSR part-I (2009), including testing on completion all as directed.

M&L for cast iron pipe 80mm bore Class 'LA' with spigot and socket ends centrifugally cast, in any length, suitable for lead joints, laid in trenches including taking down complete all as specified and directed.

M&L for cast iron pipe 100mm bore Class 'LA' with spigot and socket ends centrifugally cast, in any length, suitable for lead joints, laid in trenches including taking down complete all as specified and directed.

M&L for cast iron pipe 150mm bore Class 'LA' with spigot and socket ends centrifugally cast, in any length, suitable for lead joints, laid in trenches including taking down complete all as specified and directed.

M&L for ductile iron pipe 100mm bore Class 'K-9' with spigot and socket ends centrifugally cast, suitable for tyton type joints, in any length, laid in trenches including taking down complete all as specified and directed.

Dismantling and taking out defective unserviceable butterfly valve and replace with new butterfly valve 80 mm bore including jointing with MS nuts, bolts packing, minor adjustment complete all as specified and directed

Dismantling and taking out defective unserviceable butterfly valve and replace with new butterfly valve 100 mm bore including jointing with MS nuts, bolts packing, minor adjustment complete all as specified and directed

S&F in replacement of no clog sewage submersible pump including electric driven motor of capacity 3 to 5.5 HP 3 Phase 415 Volts with complete installation and making all electrical & mechanical commination testy complete to entire satisfactory of Engr-in Charge

S&F in replacement of non clog sewage submersible pump including electric driven motor of capacity 5 to 7.5 HP 3 Phase 415 Volts with complete installation and making all electrical & mechanical commination testy complete to entire satisfactory of Engr-in Charge

S&F in replacement of non clog sewage submersible pump including electric driven motor of capacity 12 HP 3 Phase 415 Volts with complete installation and making all electrical & mechanical commination testy complete to entire satisfactory of Engr-in Charge

Schedule of Credit (MINUS) Rs. 227430.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

ABHISHEK ENTERPRISES (BID ID -3077870)

ARADHYA ENTERPRISES (BID ID -3086971)

M/S SHIV BALLABH MISHRA (BID ID -3093606)

P S TRADERS (BID ID -3094572)

M/S Aarav Construction (BID ID -3087138)