SPECIAL REPAIR TO DS-08 (PERS LINE) AT LOWER BLOCK OF MH SHILLONG AND SPECIAL REPAIR TO BLDG NO T 22 (PERS COOK HOUSE) OF MH SHILLONG (LOWER BLOCK) AND ADDN/ALTN OF BATHROOM AND PROVN OF TANK STAGING IN BLDG NO CANTT 27 AT ANJALEE COMPLEX AND PROVN O

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified by Engr-in-Charge.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified by Engr-in-Charge.

S&F 20 mm thick 2nd class hard wood boarding in eaves board/fascia plained one side with butt joints fixed with nails complete all as specified by Engr-in-Charge.

M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified by Engr-in-Charge.

Demolation of reed lathing single , double , including bottom and plaster or chiken wire lathing complete all as specified by Engr-in-Charge.

M&L Preparation surface of wood and wood based material new or old of any description and girth and treated with two coats of creosote oil complete all as specified by Engr-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified by Engr-in-Charge.

S&F 12 mm thick block boards grade 1 quality exterior grade , commercial type fixed with screws to timber frame complete all as specified by Engr-in-Charge.

S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified by Engr-in-Charge.

S&F Continuous (Piano) hinges, mild steel , bright finish or electrogalvanised , width of flaps 30 mm (when open) complete all as specified by Engr-in-Charge.

S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in complete all as specified by Engr-in-Charge.

S&F extruded fancy type Brass handles fabricated type of size 100 mm complete all as specified by Engr-in-Charge.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators and partition plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified by Engr-in-Charge.

S&F three track powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified by Engr-in-Charge.

S&F Sheet glass, 5.50mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified by Engr-in-Charge.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick as in roof covering of tensile strength 550 mpa including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified by Engr-in-Charge.

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick as in roof covering of tensile strength 550 mpa including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified by Engr-in-Charge.

M&L for 4mm E boards 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified by Engr-in-Charge.

S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.Fe -290 (Gde E - 165 )complete all as specified by Engr-in-Charge.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with rivited , bolted or welded attachment of Fe - 410 - W ( Gde - E-250 quality - A)complete all as specified by Engr-in-Charge.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including distance pieces , cleats , plates , weldind /rivets/ bolts etccomplete all as specified by Engr-in-Charge.

S & F for Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware complete all as specified by Engr-in-Charge.

S & F for Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag complete all as specified by Engr-in-Charge.

S&F for vitreous China clay table top round shape WHB of make Jaguar Cat Part No:-OPS-WHT-15901N size 408x480x135 mm mm incl waste coupling of Cat Part No:-ALD-727 incl waste coupling of Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware complete all as specified by Engr-in-Charge.

S&F for Brass CP 2-in-1 Bibcock with flange of make Jaguar Cat Part No:-ORP-10041PM OR equivalent in Marc/Cera/Parryware complete all as specified by Engr-in-Charge.

S&F for fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make Jaquar Cat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag complete all as specified by Engr-in-Charge.

S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 mtr long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag complete all as specified by Engr-in-Charge.

S&F for Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag complete all as specified by Engr-in-Charge.

S&F for Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag complete all as specified by Engr-in-Charge.

S&F for Towel ring sqare shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag complete all as specified by Engr-in-Charge.

S&F for corner glass shelf with bracket of make Jaguar Cat Part No:ACN-1173 or equivalent in Marc/Parryware/Prayag complete all as specified by Engr-in-Charge.

S&F for CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in yag/Hindaware/parryware complete all as specified by Engr-in-Charge.

S&F for CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware complete all as specified by Engr-in-Charge.

S&F CP Hand shower 27x27 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera complete all as specified by Engr-in-Charge.

S&F for Brass CP angular stop cock fancy type 15mm bore with Capstan heads of make Jaguar/Marc/Parryware complete all as specified by Engr-in-Charge.

S&F for Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed in repairs complete all as specified by Engr-in-Charge.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified by Engr-in-Charge.

S&F 6.30 mm thick sheet glass of ordinary quality and glazing with oil putty in square exc 0.50 sqm complete all as specified by Engr-in-Charge.

M&L for applying Two or more coats (over 1 mm thick wall care putty ) of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New surfaces. on New or previously untreated surface complete all as specified by Engr-in-Charge.

S&F Gun metal gate valve class I (ISI) marked with iron wheel head , screwed both ends for iron pipe , suitable for following bore of pipe including taking down old exesting unservisable gate valve of dia 20 mm complete all as specified and directed by Engr -in- charge

M & L for PCC 1:4:8 Type D2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M & L for Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate, exc 10cm width and setting in cement mortar 1:6complete all as specified by Engr-in-Charge.

M&L Rendering, 15 mm thick in CM 1:4, in two layers, first 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a coat of 10 mm thick base coat finished even and smooth complete all as specified and as directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately.

M&L for 10 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified by Engr-in-Charge.

M & L for Glazed Coloured Ceramic tiles in vertical surface of size 300x450x7mm/300x600x7 mm thick set and joint in neat cement slury and pointed in white or colour cement to match including backing coat 10mm thick in cement plaster 1:4 finished rough to receive finishes. complete all as specified and as directed by the Engineer-in-Charge

M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified

M & L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate as in sub base to floor finished rough to receive finishes. complete all as specified and as directed by the Engineer-in-Charge

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in CM 1:4 for laying floor finishes, all as specified and as directed by the Engineer-in-Charge

M & L for 75mm thick plain cement concrete type C2 1:3:6 (using 40mm graded stone aggregate) as in plinth protection finished even & smooth without using extra cement and with sealing compound complete all as specified by Engr-in-Charge.

M&L for RCC M-25 (20mm graded aggregates) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed by the Engineer-in-Charge.

M & L for RCC M 25 (20mm graded aggregates) in Columns, pillars, piers, posts and struts all as specified and as directed by the Engineer-in-Charge.

M & L for RCC M 25 (20mm graded aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed by the Engineer-in-Charge.

M & L for RCC M 25 (20mm graded aggregates) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed by the Engineer-in-Charge.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified by Engr-in-Charge.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified by Engr-in-Charge.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified by Engr-in-Charge.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge

Ditto all as per item ser No 58 , but 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge

S & F Aluminium Powder coated (Colour) section for in door, window, Ventilator, glazed with aluminium shutter weighting 0.55Kg/M including 2nos matching handle necessary fitting of suitable size , one or more rebates, cut to jointed together with cadmium lated steel screws including rubber bending of gasket for aluminium section for fixing glass/jali and necessadry fitting, screws plugs for fixing screws etc complete and all as specified or as directed by Engr in charge

S&F for 3mm thick Figured glass, pin head type and glazing with fixed in alumnium frame/ oil putty in squares n exc 0.5 sq. m in each pane complete all as specified by Engr-in-Charge.

S&F heat resistant PVC connections pipe for hot and cold water for 450mm long 15mm dia of PTMT all as specified and directed.

M&L 20mm thick Granite stone slab oval shape cutting for fixing of wash hand basin as requiredsize, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding to edges laid in any positioncomplete all as specified by Engr-in-Charge.

S&F for PVC (SWR) pipes 100/110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified by Engr-in-Charge.

S&F for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified by Engr-in-Charge.

S&F for PVC (SWR) bends 100/110mm dia any radius complete all as specified by Engr-in-Charge.

S&F for PVC (SWR) bends 75mm dia any radius complete all as specified by Engr-in-Charge.

S&F for PVC (SWR) junction single/double equal or unequa 75mm dia complete all as specified by Engr-in-Charge.

S&F for PVC (SWR) junction single/double equal or unequal 100/110mm dia complete all as specified by Engr-in-Charge.

S&F for PVC (SWR) vent cowl 75mm dia complete all as specified by Engr-in-Charge.

S&F for 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall , ceiling and concealed or laid in floors including cutting and chassis the wall complete all as specified by Engr-in-Charge.

S&F for 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall , ceiling and concealed or laid in floors including cutting and chassis the wall complete all as specified by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified by Engr-in-Charge.

M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix bib taps 15 mm bore chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. Make-Jaquar(Queens) all as specified and as directed by Engineer-in-Charge.

M&L for concrete bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 150mm dia pipes complete all as specified by Engr-in-Charge.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing complete all as specified by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete all as specified by Engr-in-Charge.

S&F, 200 mm long aluminium anodised barrel barrel tower bolts of extruded section and fixed as complete all as specified by Engr-in-Charge.

S&F 100 mm stainless steel but hinges medium wt steel hinge pin, bright polished and fixed complete all as specified by Engr-in-Charge.

S&F, 125 mm aluminium handles cast type, anodised complete all as specified and as directed.

M&L for construction of RCC septic tank for 20 users capacity, with and including necessary excavation, earth work, brick work, concrete work, plastering, returning filling in soft/loose soil and removal of surplus soil to a distance n exc 50 mtr etc complete all as shown in typical drg No.CESZ/2019/STD-1 & specification (without sluice valve and sludge chamber) complete all as specified and directed.

M&L for construction of soak well 1.8 mtr dia and 3 mtr effiective depth with and including necessary excavation, earth work, brick work, plastering, filling with brick bats, PCC on top, returning filling in soft/loose soil and removal of surplus soil to a distance n exc 50 mtr etc complete all as shown in typical drg No.78 specification complete all as specified and directed.

M&L for wrought second class hard wood in scantlings unframed and fixed complete all as specified and directed

S&F 30 mm thick Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces

M &L glazed skeleton hardwood shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc 35mm thick of 2nd class hard wood complete.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm completre

S&F butt hinges 100 mm medium weight mild steel cold rolled and fixed

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate complete all as specified and directed

Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime or cement mortar (one side only measured in cases where both sides are plastered

M&L for rendering 15m thick on fair faces of lathing wall in CM 1:4 finished even and smooth without using extra cement complete

Supply only Integral waterproofing compound

M&L for rendering 15mm thick on fair faces of lathing wall in CM 1:6 finished even and smooth without using extra cement complete.

Complete removal of existing wall treatment surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete

S&F in repair Vitreous china (Pedestal pattern) WHB, white, flat back, size 550 x 400 mm including brackets, 32 mm waste coupling and 32 mm waste pipe all as specified and directed

S&F in repair vitreous china squatting pan of orrissa pattern, of size 580x440 mm , 1st quality, long pan white with "p"or "S" trap front or back inlet and integral footrest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. Make : Cera Cat pot No -S3030101 or Equivalent.

S&F in repair 10 ltrs capacity PVC colour low level flushing cistern with PVC flush pipe 32mm dia complete all as specified.

S & F in repairs brass chromium plated towel rack 600 mm size including a pair of CP brass bracket complete all as specified and directed.

S&F in repair tie hanger 250mm long, stainless steel body complete all as specified.

S&F in repair brass chromium plated soap dish, complete all as specified.(Make : JAQUAR MODEL NO-AQN- 7731, or as equivalent in Cera, Parryware, Hindware )

S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified .

S&F in repairs CP Brass shower rose 125 mm size suitable for 15mm bore pipe complete all as specified.

S&F for bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete

M&L precast cement concrete block massonry with solid blocks n. exc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified.

S&F for PVC (SWR) pipes (half round of 150 mm with rounded edges) as eaves gutters incluing fixing accessories as clip/cleats/rubber ring joints with regular interval of 2 mtr, single socketed complete all as specified and directed by Engr -in- charge

S&F for 150 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fix in eaves gutter as vertical complete all as specified and directed by Engr -in- charge

M&L for preparation of new steel surfaces exc 10cm width or girth and appyling two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed

S&F in repairs to 20mm dia (curtain rod) Harrison rails, aluminium anodised alloy with fixing brackets, stops, rollers etc

S&F for brackets decorative (Lattoo) for 20mm dia curtain rods

M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof.

S&F 15mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed

Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty over coat of primer complete.

S&F vitreous china bowl urinal flat back full stall type white (excluding flushing cistern flush pipe and waste pipe) complete all as specified and as directed

S&F in repair rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl dismantling of tank all as specified and directed.

M&L for Scrubing and polishing of existing kota stone slurry mixed with pigment to match the shade of the slab complete all as specified and directed by Engr-in- Charge.

M&L for Preparation of old painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described, and applying one coat of synthetic enamel paint, complete all as specified..(Make Berger/Asian/ICI Dulex)

S&F 4 mm thick plain sheet glass and glazing , in square n.exc 0.5 Sqm in each pane, complete all as specified.

M & L Machine pressed precast concrete interlocking paver block with gray cement and no pigment any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade complete all as specified .

M & L sand filling under floors or in foundations including watering and consolidation.

S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

M&L 15mm thick, 1:4 cement plaster (rendering) on fair faces of brick work/PCC block masonry or concrete surfaces

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

S&F for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth.

S&F in repair Health faucet(ABS Body)mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repairs Vitreous China Reamless wall hung EWC including UF soft seat cover closed seat cover, hinges, accossories set size 370x545x370 of make Jaguar Cat Part No DRS -WHT - 37951 :- or equivalent in make cera, parryware or Hindware

S&F in repair single lever Basin mixer with popup waste with 450 mm long braided hoses of make Jaquar Cat Part No:- KUP-35051BPM or equivalent in Marc/Parryware/Prayag

S&F 12 mm thick Block boards, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work® complete all as specified and as directed

S&F 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed

S&F extruded aluminium alloy handles fabricated type anodised of size 100 mm completre

M&L for 2nd class hardwood for Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads.Exc13 & n. exc 25 sq.cm sectional area

Demolition of cement concrete (Reinforeced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for RCC of Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like type nominal mix (1:1.5:3) (20 mm graded aggrgate) complete

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete.

M&L for preparation of new plastered surface of walls and applying two coats of acrylic distemper over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for 5.5 mm thick sheet frosted glass quality and glazing fixed to aluminium frame exc not 0.50 sqm complete all as specified and as directed.

S&F Stainless steel grill (Grade- 304) using 10mm thick square bars 100mm centre to centre of weight not less than 0.62 kg/Rm incl necessary frame and accessories for window and ventilator grill/ guard bar complete all as specified and directed.

M&L for polished Vitrified tile ultra charge , 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n.exc. 1sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortor 1:6 complete all as specified

M&l For Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty over a coat of primer complete.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch.

Description all as per Srl item No 151 here in before but for socket outlet point 5 Amp on same board.

Description all as per Srl item No 153 here in before but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 153 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing modular switch 1 way 6 A with moduler frame and cover complete 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A 2/3 pin combined 2 with moduler frame and cover complete module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 with moduler frame and cover complete module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular switch 16A 1with moduler frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, c with cover plate omplete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all spcifided and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F lamp holder, insulated body, with back plate for batten fitting complete.

Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one all as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m including making all electric connection , cutting of hole on wall and makng good disturbed surface of wall complete all as specified and as directed

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation all as specified and directed.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.complete all as specified and directed

Supply and Fixing of tubes, 'medium grade' galvanised of 20mm dia , with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Supply and Fixing PVC connections 15mm size with PTMT nuts of length 600mm all as specified and directed.

Supply and Fixing Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of size 15mm dia or for unions and fixed all as specified and directed.

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and directed.

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Material and labour for point wiring with single core PVC insulated unsheathed cable of size 1.5 Sqmm nominal area with multi-stranded FRLSH copper conductor, 1100 Volt grade drawn through and including PVC non metallic surface casing capping of suitable size with all fitting and accessories including PVC modular board of suitable size for housing/mounting the modular switches/sockets, etc top covered with plastic laminated sheet 3mm thick including 1.5 Sqmm PVC insulated unsheathed single core FRLSH copper conductor earth continuity wire connected to common earth dolly complete for one light/fan point controlled by one way switch including making good disturbed surfaces complete all as specified and directed.

All as per Item No 178 here-in-before but for one 2/3 pin socket outlet, 5 Amps on same board, complete all as specified and directed.

All as per Item No 178 here-in-before but for one 2/3 pin socket outlet, 5 Amps on independent board, complete all as specified and directed.

All as per Item No 178 here-in-before but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 4 sqmm for one power point ,3 pin 15 Amps on independent board includingFRLSH, ISI marked PVC insulated unsheathed single core multi-stranded copper cable of size 4 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket, clamps etc complete all as specified and directed

S & F LED Luminaries 600mm x 600mm 36 watt, 220 V, AC recessed type with hifg efficiency PMMA diffuser soft galre free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with 3 core flexible wire complete all as directed and specified.

Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCCB TPN/MCB SP shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed.

Supply and fix MCCB TPN, 240 Volts, 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.

Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).

All as per item No 185 above but 6 Sqmm complete all as specified and directed, including taking down unservicable one.(Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).

Supply and fixing of hot water Geysers of 50 ltrs capacity 5 star rated vertical type wall mounted, includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation all as specified and directed

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia all as specified and directed.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe all as specified and directed.

Supply and Fix of Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) all as specified and directed

S & F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete all as specifided and as directed

Supply, laying & testing cable XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground with stranded aluminum conductor 50 sqmm 3.5 Core 1100 Volts grade laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed.

Supply and laying of sub class B bricks locally available alying perpendicular of UG cable complete all as specified and directed.

MS HO Shadap (BID ID -3257250)

M/S UTTAM SAHA (BID ID -3257458)

M/S T N CONSTRUCTION (BID ID -3257436)

M/s Sohini Construction (BID ID -3257493)

MS GIRI AND SONS (BID ID -3257258)

M/s Chandan Kumar Thakur (BID ID -3257246)

R K CONSTRUCTION (BID ID -3257640)