Annual maintenance work of Railway siding connecting crossing Station with power House , MGR and pali mines with plant siding And other siding of SGTPS, Birsinghpur

Maintenance of permanent way and bridges as per specification and as per direction of Engineer-in-charge.

Out Side Power House

Inside Power House

Watch and ward of Pali siding round o'clock with all arrangement required to complete the job as per direction of Engineer-in-charge (Out side power House)

Removing and taking out old worn out/damaged rails from existing track i/c returning the same to MPPGCLstore, taking delivery from MPPGCLstore transporting to site fixing in position on required grade, alignment and level etc complete the job as direction of Engineer-in-charge.

Removing and taking out old worn out/ damaged sleeper (any type of sleeper) from existing track and replacing the same by usable / new sleepers taking from MPPGCLstore i/c fixing in position in required grade, level, alignment and packing of sleeper and other operation necessary for traffic movement in safely. Rate includes all transportation of sleeper from site to store & vise versa etc. complete the job as direction of Engineer-in-charge.

Removing and taking out old worn out / damaged crossings and switches with fittings excluding sleepers in connection with replacing the usable / new supplied by the deptt. Rate includes taking delivery from MPPGCL store and returning the same to store with all transportation fixing in proper alignment gauge level with all fastenings etc. complete the job to safe traffic and direction of Engineer-in-charge.

Crossing 1 in 8.5

Crossing 1 in 12

Switch - 1 in 8.5/1 in 12 (a) Tongue rail / Stock rail

(b) Liver box

Earth work for repairing of cess and embankment with hard soil i/c excavation, transporting to site with all leads and lifts compaction at OMC to dry density not below 90% with cost of watering and other miscellaneous works i.e. benching dressing etc complete the job as direction of Engineer-in-chagre.

Deep screening of existing track i/c points & crossing ballast under traffic including removing the core and excavation (150mm) below the bottom of sleeper and recover the clean ballast by screening on wire mesh inserting the clean ballast into the track and giving Kachcha packing to make the track fit for 15 KM PH speed. Rate includes the dispossing off the all muck and other ancilliary work required to complete the job as per IR specification and satisfaction to Engineer-in-charge.

Disposal of slided earth from reaches of cutting portion of track from side drains and track with all leads and lift ensuring proper drainage slope etc. complete as per of direction of Engineer-in-charge.

Supplying of 50MM crusher broken hard stone ballast free from dust, vegetation etc. as per I.R. specification stacking along railway track as per direction of Engineer-in-charge with all leads, lifts royalty and other taxes etc.

Running out of fresh 50MM gauge hard stone ballast on track as per requirement from stacks along the track leads with in 500M with all lifts labours T&P etc. complete the job as per direction of Engineer-in-chagre

Fixing of MCI inserts ( Stem type 1.6 Kg each) in pocket of 100mm x 100mm x 150mm making by chiseling the R.C.C. beam in track hopper in specific manner and grouting with "Dobeckot resin" 500 C and Hardner "EH-411" and silica sand M-10 in ratio of 100:50:850 by weight or equivalent approved by Engineer-in-charge including breaking of old PSC sleepers for obtaining the inserts etc. complete the job in proper alignment level and fixing the rail fit for safe movement of traffic.

Scrapping rust etc. from rails with anti corrosion paints i.e. one coat of zinc chromate primer followed two coat of bituminous emulsion with 20% mica, the rate includes all labour and cost of approved quality paints supplied by the contractor the painting is to be done on web, web foot of rail and bottom surface of rail (Exposed side of running track).

R. L. TIWARI

RAJKAMAL INFRACON

GOLD STAR ENGINEERING SERVICES